HP color laserjet 4550n: HP color laserjet 4550n

Similar Questions

• HP Color Laserjet: HP Color LaserJet - lines/stripes

  Hello

  I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

  I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

  Thank you!

  Although I work for HP, my posts are MY opinion and not those of HP.

  I would recommend some of the things

  First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

  Then, make sure that the toner collection unit is not complete

  Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

  • Maintenance of the unit
  • Calibration / cleaning
  • Cleaning page

  You can also view this document as well.

  HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

  Hope that helps.

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.

• Color Laserjet 2550 L and XP SP3

  Hello

  I installed XP SP3, last week and since I was not able to print from my color laserjet 2550 L printer. I tried the windows troubleshooting printing suggestions for the use of different drivers, but no luck. Any body out there got any advice, it's a pain not being able to print.

  Thank you very much

  If there is no Purifier not listed on the Web site nothing listed in your programs menu or add remove software window, then all you have is a base driver installation.  Following the steps listed for remove driver and the entrance to the server properties should be sufficient.  Manual uninstallation is for printers that have utility programs or use Software Solutions of Support or Director.  Even still, following the instructions provided here should at least bring basic functionality.

• LaserJet pro 177: bought used hp color laserjet pro mfp m177

  Installation disk arived broken. How can I do to replace it.

  Just upload what you want the site web theHP.

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

• HP Color LaserJet 4550: HP Color LaserJet 4550 PCL XL error

  I use this printer for years.  It works beautifully.

  Windows 10 has just done an update & the printer driver disappeared.  I use this printer with a HP Jet Direct J4135A usb card.  Now any driver or what I do I try to install or use, I get the same error message.

  I am trying to use the printer driver's upd-pcl6 - x 64 - 6.3.0.21178.exe.  The printer driver appears in the settings & is by default we & they say that everything works correctly.

  Can you help me please?  I don't want to go out and buy another printer.

  PCL XL error

  Subsystem: KERNEL

  Error: UnsupportedProtocol

  Operator: 0x0

  Position: 0

  Found the solution for everyone that might have this problem.

  Just right click on the printer icon in the Device Manager and select printer properties / Advanced / change & driver driver HP Color LaserJet 4550 PCL6 ranking to HP Color LaserJet 4550 PCL6 and click OK.  That's all there is to it.

  Now, it will work with USB (HP Jet Direct J4135A Card) that is not supported, instead of just supported network.

• LaserJet M1212: Laserjet M1212 scans colors wrong

  I'm scanning the photos of the Laserjet M1212 my Apple macbook Air. It worked fine for a while. Now, a few color pictures come out well when parsing. Others are far from the color/hue. trying to fix by adjusting the brightness and hue, saturation - does not work. This is especially a problem with skin tones - bright green faces and green clothing coming out of other colors to come. Don't know how to fix it.

  Hey @HPstuff2,

  Welcome to the Forums of HP's Support.

  I see you're a few problems when your printer Laserjet M1212nfw range scanning to your computer Mac OSX 10.11. I can help you with that, but I'll need some information first. Please let me know if you have problems with color when copying the printer. Once I know that I will be better able to help you.

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi

• HP Color Laserjet M277dw MFP: Cannot scan HP Color Laserjet MFP M277dw on Mac OS 10.6

  Hello, I can not scan to network drive using the above mentioned printer. Scan to USB key is possible.

  I downloaded the update (version 20160331) firmware image, but impossible to install the program. After double click, nothing happens. Any ideas?

  Thank you and best regards

  Christoph

  Hi Christoph,

  The printer is not compatible with Snow Leopard, it is supported on Lion (10.7) or later versions.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-Pro-MFP-M277-series/7089945/model/7089949/document/c04515051/

  The update of the firmware utilitywas not desinged for your operating system and therefore does not work on it.

  As the connectewd printer to a network, follow these steps to update firmware directly from the menu of the printer:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/document/c04517106/

  If the implementation of scan to a shared folder on your grave down Mac, please specify the exact error, and the parameters used (path of the shared folder used, etc.) also well done you have shared this folder your Mac form?

• Color LaserJet MFP M177fw Pro: installation of web services blocked to 'connection '.

  I'm trying to enable Web Services on this new LaserJet.  I am in the built-in Web Server page and the configuration of Web Services tab.  I clicked on 'Turn on' and it just keeps spinning in connection...

  DNS is 8888 and 8844

  All the other tabs work; It is connected to the computer and the Internet.  Help please?

  Thank you!

  Hi @crowndude,

  I see that you have problems with Web Services. I want to help you.

  I have provided a few steps to try to see if we can solve this problem.

  Turn off IPv6 on the printer.

  Go to configuration, network configuration, network, IPv6 Services and turn it off.

  This DNS works better for Laserjet printers. Please change the settings to see if this will help the printer built-in Web server.

  Preferred DNS address: 209.244.0.3
  Auxiliary DNS address: 209.244.0.4

  Power cycle the printer.

  If you still have questions, please continue with the following steps:

  Update the firmware of the printer by a USB connection. HP Color LaserJet Pro MFP Firmware update M177fw.

  Configure a static IP address for the printer. Proceed to Solution 3: printer of the assign a static IP address.

  Printer HP Color LaserJet Pro MFP M177fw and HP LaserJet Pro MFP M127fw and M128fw printers - printer does not keep the Wi - Fi connection.

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• HP Laserjet 2840: HP Laserjet 2840-custom color print after Windows update.

  I updated my Windows 8.1 operating system (64-bit) with the provided updates, automatic updates of Windows, about two weeks ago.  After that my HP Laserjet 2840 will not print anything in color.  It copy in color, so I know that the printer still works.  Ayone have any ideas as to why this happens, and yes I tried to reinstall or update printer drivers provided on the HP website.  Still does not work and want a solution or I will throw this printer out the window, literally and buy something new that works with 8.1.

  Updated - with the help of the forum search on another HP Color LaserJet-cannot print in color - I used these steps in this post to solve my problems of color printing.  Please keep this forum so valuable to others who have questions and need to find solutions.

• Color Laserjet PRO MFPF 377dw: problem with Color Laserjet PRO MFPF 377dw and HP network scanner

  After removing the package of printer drivers HP, all attempts of resettlement via WLAN regularly fail before the end, which indicates that the device is not found. I physically connect the printer to the computer by USB cable to install the software successfully. When I go to WLAN Wireless thereafter, the printer works perfectly within the network. If I remove the USB cable, the following error message appears when I try to start scanning HP: HP CLJM377 Scan found . In other words, HP Scan cannot be used with a PC not connected by USB cable. All other remote features function normally printer in wireless, including HP Scan & Capture. Is there a possibility to correct this, via the Windows registry from my PC?

  MrRobot wrote:
  

  Hello! @Chirsistei, your description of the HP product is classified as a commercial product (business). Our sales support team provides support via the channel of entry here. If you need immediate assistance, you will need to open a session one business with our sales support team. Click on this link http://ow.ly/I3gw30140F8 for more details.
  Let me know if you want more information and/or assistance.

  Have a great day!

  See you soon!

  Hello Chetan,

  I think I'm in the wrong forum here because I live in Switzerland and here the Laserjet Pro M377dw color is sold to private users. I have no access to a support plan and use the printer in my home office network. Your proposed solution therefore does not help me, during this time, I have posted this problem in the forum on language German you need not to pursue this new. Thanks anyway

• HP LaserJet Pro M277dw Color printer

  I can't install my hp color laserjet pro m277dw printer on my computer windows 10. Any suggestions?

  Hello @Scottro, greetings!

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you are having problems installing your printer LaserJet computer Win 10. I will definitely do my best to help you.

  What is the error you get when installing the printer? Where you can connect the printer to the network?

  Otherwise, please see http://hp.care/2dQkgAr for installation instructions. If the printer is not found while installing, perform the steps mentioned here: http://hp.care/2dQk7Nl

  Please let me know if it works for you. Thank you!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!