How do I configure to get the Defrag to complete?

Similar Questions

• How and if I can get the Vista OEM disc.

  How and if I can get the vista OEM disc. Install win 8 did not know that it would take on my vista os that Microsoft wants everyone to high grade don't like win 7 and win 8 is not working properly I want to reinstall vista. Laptop has been used without disk key code.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I configure reader as the default pdf reader?

  How can I configure reader as the default pdf reader?

  On Windows, right-click on any PDF file, select Properties

  

  Next to "Open with" select "replace".

  

  Then select Adobe Reader

  

  Make sure that "Always use the selected program to open this kind of file" is selected.

  For a Mac:

  Right click on a PDF file, select Get Info:

  

  Then in the section titled 'open with' select Adobe Reader and then click on modify.

  

  Accept the prompt and you're good to go.

  

• How can I do to get the Apple CERT?

  How can I do to get the Apple CERT?

  http://training.Apple.com

• How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  What do you exactly mean by "get the slide to set up go to the right and continue"? Can you give us a little more context and detail?

• How can I install to get the automatic updates for my drivers on a system Windows 8?

  Original title: hardware device

  How can I install to get the automatic updates for my drivers on a system Windows 8?

  Hello
  Go through the links below, it offers you a complete description of the automatic updates.
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-Update 
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-Update-FAQ 

• When I try to copy files to a CD, I get message "Windows has a problem to copy this file to a CD." How to fix? I get the same message that I click on "Copy to CD" or drag the file to copy to the CD player.

  When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file."  I press the button "Retry" without any result.  I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player.  I was able to copy these same files to a CD a few days ago.  Thanks for the suggestions.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  1. don't you get an error code along with this error message?
  2. what CD burning software is installed on your computer?
  3. what kind of CD do you use to burn?
  4. What is the status of the CD - DVD drive in Device Manager?

  Method 1.
  Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
  Reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional
  http://support.Microsoft.com/kb/310123

  Method 2.
  If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I click on the + button on the tape tabs to open a new tab, search.conduit opens. How can I change to get the original firefox tab page?

  Recently, I installed utorrent. The problem began after that. The homepage is Google, but by opening a new tab, I don't get the thumbnails appearing usually rather search.conduit page is open. How can I get my old settings back? I even uninstalled utorrent to see if the problem goes away, but it's not.

  Looks like led/Utorrent amended your preference of browser.newtab.url . First of all, check your installed programs and Firefox extensions for a related Conduit material or a 'Utorrent browser bar '. Uninstall if found.

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.
  3. Type browser.newtab.url in the search box
  4. Double-click the browser.newtab.url preference and change the url to Subject: newtab
  5. Also search about: config for driving/Utorrent preferences. Search for pipes and Utorrent. If there is, then right-click and choose reset

  I use Utorrent, but what can happen is that the Utorrent Installer installed also led. When you install programs, don't forget to read and not to go click happy.

• How do you configure vi at the exit of the average of data?

  Hello

  I'm trying to configure my vi to calculate the average, as the data are read by the computer. I tried storing the data in a table, then using the statistics option to calculate the average of arithmentic without success. I have the vi, set up for the output data, as we read on the screen. It seems that the table is not store data, instead, I get the same value of the average with respect to the data.

  Any ideas?

  Thank you

  Sumit.

  You not save the data in a table. You convert the scalar you get from the pulse function in a table 1 d with a single element. You do also very confusing and complicated way. All these conversions of/Dynamics/1 d/2D/Dynamics/1 d are all simply ridiculous. Whenever the loop goes through, get you a whole new table 1 d with a single element. For good build a table, you would need a change of registry with a function of table building connected to it. You can also use the PtByPt function mean cable directly to the exit of scalar measures pulse.

• How to use JS to get the movieclip in the Web?

  Hello

  Look at this code example:

  JS of the canvas:

  (function (lib, img, cjs, ss) {
  var p; // shortcut to reference prototypes
  // library properties:
  lib.properties = {
  width: 550,
  height: 400,
  fps: 24,
  color: "#FFFFFF",
  opacity: 1.00,
  manifest: []
  };
  lib.ssMetadata = [];
  // symbols:
  (lib.mc = function(mode,startPosition,loop) {
  this.initialize(mode,startPosition,loop,{});
  // ss 1
  this.shape = new cjs.Shape();
  this.shape.graphics.f().s("#FFFFFF").ss(1,1,1).p("ApwmjIThAAIAANHIzhAAg");
  this.shape.setTransform(62.5,42);
  this.shape_1 = new cjs.Shape();
  this.shape_1.graphics.f("#FF0000").s().p("ApwGjIAAtGIThAAIAANGg");
  this.shape_1.setTransform(62.5,42);
  this.timeline.addTween(cjs.Tween.get({}).to({state:[{t:this.shape_1},{t:this.shape}]}).wait(1));
  }).prototype = p = new cjs.MovieClip();
  p.nominalBounds = new cjs.Rectangle(-1,-1,127,86);
  
  // stage content:
  (lib.mymc = function(mode,startPosition,loop) {
  this.initialize(mode,startPosition,loop,{});
  // mc
  this.mc = new lib.mc();
  this.mc.setTransform(215.5,167.1,1,1,0,0,0,62.5,42);
  this.timeline.addTween(cjs.Tween.get(this.mc).wait(1));
  }).prototype = p = new cjs.MovieClip();
  p.nominalBounds = new cjs.Rectangle(427.5,324.6,126,85);
  })(lib = lib||{}, images = images||{}, createjs = createjs||{}, ss = ss||{});
  var lib, images, createjs, ss;
  

  HTML:

  <body>
  <canvas id='canvas'></canvas>
  </body>
  <script>
  alert('lib.properties.fps')
  </script>
  

  My question:

  the canvas has a movieclip named "mc".

  How can I alert the 'mc' as alert the 'lib.properties.fps '?

  alert('lib.mymc')//success
  alert('lib.mc')//success,but it is library ,Not in the scene
  alert('lib.mymc.mc')//undefined,how do it?
  
  

  Thank you very much!!

  Hi, ClayUUID

  Thank you help!

  the JS of the Web is published, we can change it. I want to play the film of the canvas from the html file, so I get the film name or ID Witch of the Web.

  NOW I can solve this issue to share with everyone.we:

  Set a global variable to store the name of the instance you want, you can easily find it.

• Q; How to re - configure and monitor the listener of the APEX

  Hello
  I installed the listener of the APEX on a WLS 12.1.1 (SPARC Solaris 11platform) and configured by using the URL:
  
  http:// < Host >: < port >/apex/listenerConfigure
  
  It worked very well!
  
  Now I need to change the URL and the credentials for connecting to my APEX instance and when I tryo to hit the same URL again, I get the following message:
  
  The listener of the APEX is already configured. Please log on as an administrator to access the listener Administration APEX.
  
  I read to you is a file called apex - config.xml somewhere but I can't find it under my WLS installation directory.
  
  Any ideas what could be the problem?
  
  See you soon,.
  Andy

  As mentioned Udo, the 2nd option (change in the war before you deploy file) is probably the best. One suggestion is to use a variable then rather hard, the location of the XML encoding. The variable can then be set / changed on the command line.

  Web.Xml
       
            config.dir
            ${apex.dir}
       

  In the weblogic under the Server Start Settings console, you can change the variable according to the needs for each instance managed for each environment:

  -Dapex-dir = / dir1/dir2/myapp/apex

  Good luck.

  Jack

• Bought cs6 and how open I have to get the CS6 Extended trial before I can open the program.

  Bought cs6 and how open I get the CS6 extended trials to open the program. I don't want extensive testing, but I just want to open CS6. How can I bypass or get rid of the option of trial - extended the trial window opens whenever I open CS6.

  Connect you or activation errors

  Mylenium

• How a VAPP user could get the Info org-network through the REST API?

  Hi all

  I can get the org-network when I use the system administrator use the REST url "/ api/org", but when I use a VAPP user, may not work properly.

  Then I try to config user VAPP role permission and give him the permition operating organization. The answer is STILL no network-org Info too

  What should I do?

  Respect of

  Hello

  VAPP users are not allowed to see the org above their visibility networks. They are allowed to see the networks VAPP.
  Org networks are visible to the user 'administrator of the Organization ". If you want you can see the permissions of the role "Administrator of the Organization" and create role with the org network of related rights, which will be tailored to your needs. You can also change the role of 'paralytic' adding rights for ' Org networks-> view/edit properties "and"organization-> view organization networks. This can be done as easily in the user interface of vCD.

• Cannot get the DMA2100 to complete the set up at the end

  I seem to have a similar problem to the one mesotonic posted at http://forums.linksysbycisco.com/linksys/board/message?comm_cc=US&comm_lang=en&board.id=Media_Adapters&message.id=4040#M4040

  As suggested by Mared1784 in this thread, I went to five listed (hyperlink) of the updates of Windows and downloaded. I got almost throughout the Extender in place of the finishing process, HOWEVER, in the end, I always get this screen "Windows Media Center update required" appear on the TV and it may not cross , even if I downloaded the updates from Microsoft. After download, the following Media Center updates are now confirmed by my computer:

  KB932818

  KB935652

  KB941229

  KB955519

  KB960544

  KB967632

  KB947172

  Meanwhile, my wireless router, the DMA2100 and the PC seem to be connected because when I open Media Center on your PC and go to 'Settings'---> 'Extender', it shows the DMA2100us here with the phrase "ready to use". Also, when I go into 'Settings'---> 'Network' in the Extender, it's showing the connectivity with the router. I JUST can't GET the EXTENDER to CROSS WHO * bleep * 'Update required WMC"SCREEN.

  Does anyone have a solution to this problem?  Thank you!

  D. Bill goes

  Grand... Thank you! I installed Vista SP 1 and when my PC rebooted I was able to get Media Center to display on the TV. HOWEVER, now I have a problem with getting the DMA2100 remote to navigate as well vertically and horizontally on the base of Media Center display page. It shows the "TV + Movies TV recording" box and I can open and maneuver around that. I can also move horizontally (using the > keys on the remote control) to 'live TV' on the right box and open it. However, when I try to navigate vertically to the 'Music', 'Photos + Video', 'tasks' or 'Media online', using the ^ button on the remote control, absolutely nothing happens. So, I'm stuck and unable to acess my Media Center more important boxes/folders. Meanwhile, on my PC when I open and run Media Center I can fully navigate anywhere on his page to display.

  Any suggestions? What I have to make adjustments on my PC to allow navigation full on the TV using the remote control DMA2100, or is it rather a problem in the DMA 2100 (or remote control) itself? Should / can do?

  Thank you.

  Bill D.

• Firefox 4 seems to have forgotten the small progress bar at the bottom right of the screen that shows how close you were to get the web site that you just clicked to retrieve. What happened to him?

  In older versions of Firefox, there was a small rectangular window at the bottom right of the screen which got progressively filled with green squares, that your last order has been processed. This allowed you to know that the computer had received the order and close about how it would carry out the requested task. No such window does appear in Firefox 4. That has been omitted or what I have to do something to get it back?

  Click on View - Toolbars - then the module Bar, and your progress bar will be there.