How do I enter my restore partition Windows Vista so I can install it?

Similar Questions

• How to download and update drivers in windows xp so I can install scanner

  I got scanner message connected to the pc but is not installed. I have the disc, but installation does not finish... What can I do next... joanpc

  Hello

  1. What is the brand and model of the scanner?
  2. what exactly happens when you try to install the scanner software? You receive an error message?

  If you receive an error message and then, after return the exact error message.

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• How do I PERMANENTLY remove games in Windows Vista (not just disable)

  How do PERMANENTLY uninstall you games in Windows Vista?  I can do under XP, but can not find instx for Vista.  I don't know how to disable the games, I want that they UNINSTALLED permanently.  Thank you.

  LStewart,
  Here are instructions on how to remove programs.  And here are instructions on how to remove (or deactivate) the default Windows games.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought a computer used hp that someone installed an illegal copy of windows 7 and I can't restore to windows vista

  I bought a used computer hp someone installed an illegal copy of windows 7 on and I can't restore to windows vista

  You can order HP recovery disks:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=bph07143

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c02682650#x0027;destPage=document&CC=UK&DLC=en

• How to do a system restore with windows 8. my mouse is not working but the keyboard works

  How to do a system restore with windows 8. my mouse does not work but the keyboard works.

  I've updated some drivers and now my mouse does not work

  Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.

  You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.

  Jim

• How do you want to re - build windows vista 32-bit.

  How do you want to re - build windows vista 32-bit. My computer crashed while it was up-to-date.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _________________________________________________________________

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• I want to do "System Restore" in Windows Vista. But I can't change the restore point

  I want to do "System Restore" in Windows Vista. But I can't change the restore point. How to configure manual restore point? Can I enter a date I want to restore? I tried, but it did not work.

  Original title: in Windows vista system restore

  Hello

  Either the system restore point is already created for an earlier date, or is not available.

  You cannot create a restore today Point to return to yesterday.

  You can create a restore today Point to use in the future.

  Here's how to use the Vista system restore:

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Does she not get the restored properly - Windows Vista Edition family

  I did a backup on 2 of vdv - that, once accomplished was reported as successful. Now, I have restored my laptop to factory settings since she was infected. When I use the Center backup and restore and Advanced Restore option - files from a backup made on a different computer - then the hard drive. He starts the backup asking if some files or all - I choose all files in the backup. It then proceeds...

  I got the c# edition installed with which came the SQl-whiel restore the backup of the ih said there is problem with the authorization of users for SQL 2 related records - I click on go come without affecting the rights of the user. In this case 2 times.

  In the meanwhiel, it shows a lot of files being restored in the progress bar. Then he gives erroe that the label of the disc in the drive is not 1 user-Pc-DateofBackup-disk name where as the disk name is the default name assigned when the backup is performed, which is the name of user-Pc-DateofBackup (may not be the suffix of disc 1).

  Then I choose the option ignore this and drive 2-, it gives the same error...

  When I check - I find a lot of files is restored, but they contain no data/files.

  Help, please.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your processes more closely than would a full restore (which is not available in Vista Home anyway).

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.

  Here is an article on the advanced use of restoration (during normal restore does not work): http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that the backup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to make a backup of my Windows Vista?

  Hello.

  Windows Vista has been installed on my Toshiba laptop when I bought it.

  How to make a backup of my Windows Vista and I need to?

  Can I do a backup on a CD, or how?

  I think I have to need if I get a virus and you need to remove and install from the beginning.

  Thanks by

  Hello

  I think that it s a good idea to make a backup on your laptop.

  You have created the Toshiba recovery disks? When you bought a Toshiba laptop, you must create these disks. If you have a virus or something else with these discs, you can get the factory settings on your laptop.

  You can create discs with the Toshiba recovery disc creator and if you didn t again, you get the following message:

  > Important INFORMATION
  >
  > your system is equipped with a hard drive recovery system. If you need to repair
  > your computer in the restaurant to original factory State, you can do it directly
  > drive hard (press F8 when you start your computer, choose "Repair your computer"
  (> and follow the instructions in the menu) or create a media drive bootable recovery for this purpose.
  >
  > Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the
  > Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer
  > is seriously damaged

  So create one and if you need, you can get factory settings with Windows, drivers and tools in minutes.

  If you want to make a backup of your laptop with all the software that was installed by you, you must use programs such as Acronis True Image backup.

  Bye!

• Files disappeared after restore of Windows Vista recovery

  Hi, there, PC of my little brother had a big problem today. Coz the files disappeared after restore of Windows Vista recovery.
  How can he recover his files and other data?
  Thank you to you all.

  Hello

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I use windows 7 and some how I set everything to open my Windows media player, I can't understand how to set it all back

  I use windows 7 and some how I set everything to open my window media player, I can't understand how to put everything back it was. can someone help me

  Take a look at these two:

  MS - http://support.microsoft.com/kb/950505/en-us

  Seven forums - http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html

  (Start with EXE at least).

  Good reading and see if they match your problem and, if so, if they help.

  Note: As some patches of Reg, back up your registry first use - if you can.

• How to fix error code 643 in windows vista

  How fix the error code 643 for windows vista when you try to install the updates.

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

• I can't find my menu to change sounds like stop, critical judgment, and so on, how do I get it back? Windows Vista.

  critical stop as stop, and so on, how do I get it back? Windows Vista.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  Method 1: try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Also try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For your reference: Change the sounds of the computer: http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds

  Hope this information is useful.

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.