PC does not, but windows 7 will be when you press the stop button

Similar Questions

• Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Here

• Loop will not stop when you press the stop button

  Hello

  I have a LabVIEW program that includes a number of loops, but one of my curls (which surrounds a series of functions "Write TDMS") has a Boolean stop that transmits a signal through two GOLD and functions in a control of the loop (see aea of interest). My problem is that when I press the button stop the loop will not stop and will continue to save and write data that I didn't need a file.

  Could someone please help with this?

  Kind regards

  Aaron Broady

  
  

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Firefox 4 does not save form data after sending form and pressing the previous button

  Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

  See:

  • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • Check if Firefox automatically fills in forms

• A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  Select the text and use the Warp tool to give a fake italic.

• ElliteBook 8460p will not be running when you press the Start button

  Hi Ant classmates.
  
  I am facing a problem with my 8460p ElliteBook. When I press the Start button it won't start and I need to apply some mechanical vibrarions so he reacts to the button. I guess that there is a problem with a connection inside. The thing is that he does not always fail, but it happens more often. I'm afraid to send it to HP support and resume with a message like "the problem didn't see the - up." I'm close to the date limit of warranty, but I need my laptop for 3 more weeks for professional issues. What should I do?
  
  Thank you

  Hello Angelica,.
  Welcome to the HP Forums.
  
  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can click here for the link.
  http://h30499.www3.HP.com/hpeb/
  
  Thanks for posting on the HP Forums.

• PC does not start when you press the power button, after that starts automatically as a ghost!

  I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.

  Even once when I closed and leave it for a while and still the problem is not resolved.

  Help, please

  I solved the problem

• How can I make windows play a sound when you press the SHIFT key

  My keyboard doesn't have a light to indicate when it is capitalized. He used to play a sound, but it is more the fact after that I said not to do. However, when entering passwords that are case sensitive, it gives the wrong password. Can someone tell me how to re - turn on the sound.
  Its a Logitech MK320 wireless

  Look in Control Panel > accessibility, and then click "make the keyboard easier to use." Check the box "turn ToggleKeys. This will produce a note when you press the lock keys. Or just check the other box beneath it. In this way, you can turn the tone on or off without having to return to these settings.

  SC Tom

• Tecra A4 does not light when you press the power button

  When I press the power on button it turns green for 4/5 seconds then turns off.
  "I do all the tests the support on the page:
  
  * Press on and press and hold the Fn key and press the F5 key repeatedly. If an image appears on the display, this indicates that the image has been activated to a connector for a monitor outside, causing only appear to be off the computer.

  * Connect the adapter to the computer.

  * Remove the battery and unplug the AC adapter and then connect only the AC adapter. Make sure that the power adapter is one that comes with the computer. Try to turn on the computer again, without the battery in the computer.

  * Plug the power adapter into a different plug.

  * The battery, ensure that there are enough energy to start the computer.

  * Press and hold the power switch for 10 seconds (to make sure that the computer is turned off). Wait five seconds, and then tap on and again, hold the switch for three seconds (turn on the computer).

  * Ensure that nothing beats (a sliding plastic cover) in the path by pressing the power switch.

  * Disconnect all devices (printers, pointing devices, keyboards, etc.) connected to one of the ports on the computer.

  * Remove any additional memory, beyond the computer built in memory, or the first module of memory in the computer. If the computer starts correctly, reinsert the memory and turn the computer back on. If it does not start successfully, memory can be inserted incorrectly, it may be defective or the support of memory may be damaged. "Try to replace the module memory."
  In vain:]

  You know? THX

  Hello

  There must be a hardware malfunction.
  You have tested a lot and nothing has worked
  I think there is not much to do, you all tired and I guess the authorized service provider could help you

  If your warranty is valid all should be done for free, so don t you worry and ask the experts ;)

• EliteBook 2740 recharge does not and HP product Assistant crashes when you start the battery check

  I just buy an elitebook 2740.  When I hover over the battery and plug icon in the taskbar, it says do not charge battery.  I tried to uninstall the ACPI compatible driver in the Device Manager and scan for new hardware to reinstall it, and it worked the first time.  But now it does nothing.  When I open produced tune, I get an error message and the program crashes when starting the battery check.

  Yes, I downloaded and installed the BIOS and chipset drivers and followed by the shutdown sequence.  It's the job niow.  I called Technical Support and learned that the battery does not load when it reaches a certain percentile because the computer recognizes it has a good charge.  When it is less than 95% fresh or so, it will load.  Mine does not work correctly.  Appreciate your help, I wasn't aware of this design feature before now.  Overall it was a good exercise.

• Volume/brightness does not appear when you press the volume button on laptop keyboard

  Recently, when I went to change my volume, the small bar has not appeared on my screen, showing how much I was going to the top. Brightness bar did not show either and it's really annoying because I never know how it is until music strikes out. Any suggestions on how to fix it? I'm totally lost.

  Hello

  I apologize for the delay in responding. It seems that the user profile that you are using has gone corrupt. Try to create a new user profile and check if you have the same problems here as well.

  1. open user accounts by clicking on the button start the picture of the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.

  2. click on manage another account. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  To fix the corrupted profile follow the steps mentioned in the article below.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try using the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:
  How to run scan SFC

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all of the necessary files any replacement SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  For more information, see the link below.

  http://support.Microsoft.com/kb/936212

  Let us know if this helps

  Concerning
  Anthony.

• Satellite C series - cursor will move only when you press the trackpad button

  Cursor on my mousepad suddenly stopped moving unless I have push button left or right, the cushion itself is not locked (fn + f5).

  Please help this is driving me crazy. I tried to uninstall drivers and reinstall but still will not work

  This behavior is very strange.
  Can you please tell us which model of laptop you have, what OS you are using and since when did you notice this problem?

  You use an external mouse at this time?
  When you open Mouse Properties try please use option restore all default values.
  If the problem persists, you can try to reinstall OS (recovery image) and test the functionality with the factory settings.

  In the case that the same problem my only explanation is that must be material junk.

• Save window under is displayed when you press the shortcut CMD + S

  Hello!

  I had this problem a couple of days. Whenever I press CMD + S (which is supposed to be a shortcut for a quick backup on Mac) the window save under is always displayed. I looked at the file menu, and there is nothing wrong with the shortcut key. I also tried pressing CMD + SHIFT + S (which is the real shortcut to save under) and it works fine. Please help me with this. Thank you!

  The image is compliant png?

  You need several layers etc. ?

  If yes then it cannot be saved as a png image directly naturally.

• My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

  Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

  Hi John,.

  Please let me know exactly what happened when you tried my suggestions of first and second.

  Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

  When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

  With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?

  Tricky