How do I know if a fix KB has an impact on other MS software?

Similar Questions

• How will I know if ChkDsk fixed bad sectors?

  Original title: Chkdsk results

  I ran ChkDsk.  In case the viewer asks Winlogon, it says "4 KB in bad sectors."  How will I know if ChkDsk fixed these bad sectors?  How do you know if there are problems or how whether anything was not fixed?  How will I know if I'd be worried about these results?  The content of the Winlogon is:

  Checking file system on C:
  The type of the file system is NTFS.

  A disk check has been programmed.
  Windows will now check the disk.
  Cleaning of minor inconsistencies on the drive.
  Cleaning of unused 309 entries index $SII of file 0x9.
  Cleaning of unused 309 entries index $SDH of file 0x9.
  Cleaning of 309 unused security descriptors.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.
  CHKDSK is verifying file data (stage 4 of 5)...
  File data verification completed.
  CHKDSK is verifying free space (step 5 of 5)...
  Free space verification is complete.

  55263599 KB total disk space.

  Thank you
  Heidi

  Windows tries to "fix" or "repair" them, but anyway, the hard drive

  is endangered... Get ready to have more problems, too, even

  have the hd as a 'slave' to another hd (c), the data will get corrupted, and

  worse still, coming just missing. HD replacement is relatively cheap...

• How will I know if my computers security has been breached? __my owner asked me for my email address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  How will I know if my computers security has been breached?
  My landlord asked me my e-mail address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  How will I know if my computers security has been breached?
  My landlord asked me my e-mail address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  Hé oddaz

  If you're really worried that your machine may have been compromised, try to back up your data, and then reinstall windows

  Walter, the time zone traveller

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• How will I know if my dv5 pavilion has coolsense technology?

  How will I know if my dv5 pavilion has coolsense technology?

  I think you got the battery itself and not the compartment where the battery is located. FN + ESC must implement your p/n

  also type cool on start, search, look above. software coolsense?

• How will I know if my new laptop has Windows 8 Pro

  I bought two Dell systems.  One was the M6700 I knew had top Windows 8 Pro and I installed Media Center with the Microsoft product key sent to me.  I went back to the system due to SIGNIFICANT and costly Pro Tech support.  After 26 days, they refused to fix the screen would dim every 3 minutes, saying: "if he wasn't a yellow bang in Device Manager it was not their problem.  The last day, I accidentally found a Dell program that controlled the graphic setting called color Dell Premier.  I decided to go back to the workstation even though it was a great system.  I didn't look forward to 3 years technical support useless and frustrating to a value of $350.

  A month later, I bought an Alienware technical support personnel system is so much better.  I worked with them for years and never had the problems I had with the support of Corp.

  Since it has been a month and I had just finished a factory on the M6700 system restore, I felt that I would have been able to use the product key for the Media Center.  However after working with a Microsoft Tech today for an hour. He seemed to feel that the Media Center button would not work on this system for two possible reasons. 1. what it cannot be Pro Windows 8 or 2. The key somehow was not removed from the M6700 after the factory restore.

  So before having any contact with Pro support, I would like to know how I can tell if this system or does not have Windows 8 Pro.  I don't remember if the Windows 8 Pro showed in the system information report.  Or if she could be considered under control panel - system.  I tried to run the update on the upgrade assessment and who has failed for some reason, saying: it was not available in my country.  What is the United States.  It seems that the system is configured for which English is the language.  Given that I didn't get through a full installation of Windows as if I installed the program as you would if it was Windows 7 system comes through a Microsoft Agreement which I checked and then configure the network online and I logged on.  I was not even given the opportunity to choose the name of system I need to change.

  I'm a little lost at this stage to say the least.  If Microsoft technology could not tell if it is Windows 8 Pro, do not want to assume that the OEM support would be.

  I have the disc that came with the M6700 and I it matched with the disc that came with this system.  Both drives have the same part number and both claim it's for Windows 8 Recovery Media for Windows 8 products.

  So it is a Question of two parts:

  1. How will I know if I have installed Windows 8 Pro &

  2. How can I get my product key Media Center back?

  Thank you for your support.

  Frances

  1. How will I know if I have installed Windows 8 Pro &

  Press the Windows key + X

  Click System

  Look under Windows Edition

  2. How can I get my product key Media Center back?

  You should have received by e-mail.

  Once you receive it, follow these steps and re-enable it by phone:

  Press the Windows key + X

  Click System

  On Windows, click the link:

  Get more features with a new edition of Windows

  Click on the "I already have a product key link.

  -------------------------------------------

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• How do I know when a submissive app has been approved by firefox os market?

  Presented an application on the market of firefox as a developer, I don't know if it was still approved. How will I know when it will be approved?

  Hello, when you login to your account to developer at https://marketplace.firefox.com/developers/ and go to your presentation, you should see a menu "status and Version", which contains information about the State of the review process.

  https://developer.Mozilla.org/en-us/marketplace/publishing/submit/overview

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• How will I know if my flash drive has backed up all my data?

  Just bought a flash drive.  I figured out how to run a backup on the flash drive.  But how do I know if the flash player now has my files?  And which files actually need.  How to restore files should I have to?

  These questions can be answered by checking the help files or documentation for your backup program.  If you have used Windows backup as your backup, open help and Support and check the documentation for backup Windows.

• How do I know if service pack 3 has been installed successfully after update

  I installed (I think) successfully in Windows XP home SP3. But how to know for sure this service pack 3a was installed successfully? Where can I check? Thank you!

  It seems that SP3 is not installed.

  FYI -.

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  You can download the full file (for single PCs too) so you can keep it if you ever need later.

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  or

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  TaurArian [MVP] 2005-2011 - Update Services

• How will I know if my Windows XP has a virus?

  He tries to stop after the first two loading screens and I'm trying to see if a virus is the reason why.

  If you think that your computer has a virus, it is important to know if you have a real or whether it is another problem. There are telltale signs that may indicate whether or not you have a virus. Look and listen to find out if you regularly the following types of questions; Then, you can resolve your virus if you have an and recover your computer to good health. If you don't have such problems, consider other troubleshooting
   
  Looking for obvious changes. Look to see if there are changes to your desktop, your Favorites or in how your computer behaves in general. If your desktop icons have moved or if something has been added to your desktop, it's a sign that you have a virus. Look in the "Add/Remove Programs" section of the control panel and see if there are any programs that you forgot to install. Often a virus will install other programs that cause problems. If you have a new toolbar in your web browser, it is another sign that you may have a virus.

  Disconnect from the Internet. If your computer behaves differently when you are connected to the Internet, it is another sign that you have a virus. One of the main objectives of many viruses is to steal the resources of your computer. When you're not online, a person at the other end is not able to get to your resources.

  Check your speed. One of the ways to know if you have a virus if your computer is running more slowly. Sometimes, the computer will run just a little slow, but after having a virus for some time the computer will become extremely slow in all this. Disconnected from the Internet can speed up your computer, but with the malicious virus, that it may not matter if you are connected to the Internet - virus will use your resources just to cause you problems.

   

  Beware of errors. If you get strange errors or just more errors that do things like close your programs or you to restart your computer, there is a good chance that you have a virus. Sometimes the errors are normal, but they shouldn't happen constantly. Keep a log of when you get errors, what you were doing when it happened and how the error was.

  
  Listen for the noise. If your computer is a lot of cracking noises accessing the drive hard if you do nothing, then it is probably controlled by a virus or a person who set up the virus. Most of the time when you are not using your computer it shouldn't do anything.

  
  Inspect your security software. Check if your anti-virus, firewall software or updates of Windows have been changed or disabled. If you have security, but it is not up to date or not good enough, a virus to disable the software to give and other viruses more access

   

  Run the malicious software removal tool

  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

   

  Download and install MSE to scan to install security software if you do not

   

  http://www.Microsoft.com/en-in/security_essentials/default.aspx

• How do you know if your itunes account has been hacked?

  Just to have an email with an invoice of apple's music that I didn't sign up for - how can I verify that this is legitimate and not a phishing scam? Can't find anywhere my subscriptions to see if a subscription to apple's music is now on my account!

  Likely your account has been hacked not unless you provided the log/pass to a fake site already

  See this document on the review of itunes purchases

  See your purchase history in iTunes on Mac or PC - Apple Support store

  See the document on fraud report and refer to the section on identifying it as well in the same document.

  http://www.Apple.com/legal/more-resources/phishing/

• How will I know if my X 220 has IPS?

  Hello world

  I just got a new X 220, and I try to understand what to look for enjoying the IPS. (I in fact ordered it for the machine).

  It seems bright and quite easily visible at an angle, but I expected a bit more.

  Anyone?

  Also, I installed a new copy of Windows 7 Pro. Anyone know if there is a kind of the Lenovo driver package combo I can install, instead of taking the time to individually download and install separately, each driver?

  If you go to control PANEL, SYSTEM and then DEVICE, under MONITORS MANAGER, IPS monitor is listed as "viewing angle wide & high density FlexView screen 1366 x 768.

• How do I know if the governing body has already been initialized

  Hello

  I am trying to automate a microscope stage.  I need to be able to move the XY stage with joint movement and Z with single axis control.  I was able to do that, but I still have a glaring problem.  The module for the XY stage can be loaded first, or the Z scene can be loaded first.  One charged first needs to initialize the Board of Directors, then the rest should just run on the Board.  I don't know ahead that will be the first and I was not able to find a way to transfer information between programs that I have several cards are running of this system and the user can decide to control the scene with a Board and the development Z by another.

  So, with all this, is there a function that will tell you if the jury has been initialized.  Here's what I want to do

  Beginning .dll

  Get properties (blending Board ID mode, axe,...)

  Check if the jury is initialized.   If it is then flex_initialize_controller (BOARDID, null);

  Set up the axis...

  Run the program.

  Thank you

  When one NOR 73xx motion control board is not initialized (e.g. after a power cycle or a reset of the Council), the Council is in State of Power-Up reset. The initialization routine must reset this indicator to prepare the Board for normal operation. You can read the indicator Reset Power-Up with flex_read_csr_rtn().

  I hope this helps.

  Jochen Klier

  National Instruments

• How will I know if a blackerry version has the menu button?

  Hello

  I'm working on a Blackberry app, we use the menu button but I noticed some versions of blackberry (like 8700 s...) don't function of this key. Is it possible to know a particular version of Blackberry features this key?

  Thanks in adance.

  I guess you need to do a couple of models that do not have the menu button (87xx, 6xxx, 7xxx) from the list. All the new models have the menu key, although this may change in the future...