How do I reboot, I have restart, which do not work
I donnot know how to find restarting computer, I can only find restart and that doesnot work to get out of safe mode, I tried everything, thank you
Reboot is reset. You can use SHUT DOWN, and then launch it again if this is useful. But if it's only the boot without failure, you can have a situation where you need to run the repair of Windows from your Windows drive. Or you may have to reinstall Windows.
It's your personal computer and not a work computer?
Tags: Windows
Similar Questions
-
I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?
Hi altak38,-What is the add-on which you speak?-Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?If so, follow the steps in the following article to resolve this problem.Post back with more information for the issuance of the add-on - to help you help. -
I am unable to run Windows Search. No matter how I open it, it says "Windows Search does not work."
What is Windows Desktop Search 4.0 that you have installed with your updates.
If it is uninstall it from Add / Remove programs.
The update is KB940157
If it does not show then show updates is on top, use the method below.
Click Start , type cmd.
Now in the result of the research with right-click on cmd.exe and select run as administrator if you are not the administrator.
Type regsvr32 /u "%programfiles%\Windows Desktop Search" and press enterYou search old back, see if it works.
The next time you do the Search 4.0 updates appears again.
You can try it again if you wish.
-
Mini HP which has not worked for a year at least.
We have a mini HP which has not worked for a year at least. I try to get back to work and am getting a screen that says: enter the administrator password or start on password. Then the disabled system 83656543. can you please help?
Hello
Shut down the laptop. Tap away at the esc you key start Notepad to open the Start Menu. Select the BIOS ( f10 ) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.
Post back with the details of any error message.
Note: If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .
Kind regards
DP - K
-
Recent new laptop. CC not updated I have even on office and was on the previous laptop and can only be loaded on both devices.
I work Adobe password which will not work on cc cannot find or find a dedicated password CC. In a traffic jam.
If you're talking about being asked a password during installation or update, this is the password for your COMPUTER, from your operating system verifies that you are authorized to make changes
-
Question!
I would buy Indesign, but I couldn't because I'm registered in Belgium. I would like to change my country. 0800 phone number... I have to reach does not work! What could I do?
Hello
Please see change the country associated with your Adobe ID
Otherwise, you can contact Adobe sales as well.
Kind regards
Sheena
-
Restart-VMHost does not work after unplug the vCenter
Hello
Hope someone can help me with this.
The restart-VMHost does not work in my script. The output says vCenter connection error is required by the current operation. The connection does not exist, perhaps because it was actively closed or expired.
What I try to achieve in the next script is all virtual machines stop and then restart the host. Since the vCenter is a virtual machine that needs to be stopped. If the script connects to each guests instead of vCenter
SE connect-VIServer-get server #to "vcenter01", a list of hosts before stopping the vCenter
$hostlist = get-VMHost
Disconnect-VIServer *-confirm: $false{foreach ($string in $hostlist)
SE connect-VIserver-server $string - user 'root' - password "abcd".
}$vmlist = get - VM
{Foreach ($vm to $vmlist)
write-host 'Shutting down $vm' - blue BackgroundColor - ForegroundColor white
$vm | Stop-VMGuest-confirm: $false
}Sleep 10
{foreach ($path in $hostlist)
Restart-VMHost $path - force - confirm: $false
write-host "$path restart" - blue BackgroundColor - ForegroundColor white
}I suspect that the message could be caused by the parameter that you pass to the Restart-VMHost cmdlet.
You use the retrieved by Get-VMHost VMHost object when you are connected to the vCenter.
You can try this part of the code as follows
....
{foreach ($path in $hostlist)
Restart-VMHost $path. Name - force - confirm: $false
write-host "$path restart" - blue BackgroundColor - ForegroundColor white
} -
By updating my iPad iOS 10 it locked up and I had to reboot. Now a few apps do not work.
Is it possible to reinstall iOS 10 or should I just wait for the next update from Apple?
You can restore the device. You can either restore from a backup, or you can restore back to the factory. See the information in these two documents of support for instructions, depending on how you want to restore.
Restore your iPhone, iPad or iPod touch from a backup - Apple Support
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
-
How to get back to normal. F11 does not work. Don't have the bar menus or dock.
I went to the display of full backups. Now, I can't go back to the normal screen size. I don't have tools, menu bar or dock. Cannot click on anything. F11 is not working with Mac Snow Leopard.
On a Mac, you should be able to toggle the mode full screen via cmd + SHIFT + F.
-
How to remove an update to Java which will not uninstall?
I have windows vista and I recently upgraded Java 6 update 23 and my program mp3 Rocket quit working, he kept sayingnot to access c libmp3Rocket jar, so I tried to uninstall the update of java, but when I click on uninstall it says preparing to remove, but then the account control user box pop up to ask if I leave this program not identified to my computer and I click on access to the so then he says to it you please wait while Windows configures java, but its only up there for a second and then the box disappears, and then the update is still there, nothing happened. I went to the site of java to check my java version and have downloaded the update of java 6 22, but he always says that something is wrong. Java does not work. And I tried to open mp3 rocket after java 6 update 22 d/l would be and now, nothing happened, is no longer, box pops up saying cannot access c, but the program does not come either. Does anyone know how can I get rid of the update of java 6 23, I think that's the problem, but it just will not, uninstall I think I need strength somehow remove it.
Go to http://java.com/en/download/help/index_installing.xml
and click on the Red help button now great. Ask for help to uninstall manually.
Colin Barnhorst
-
How to load programs from a CD which does not automatically load
I am new to windows 7. I want to load a program from a CD. It was easy with the Control Panel Add and deleate one program; or the execution of the order. Now, I don't know how to load a program from a CD which does not automatically load. Help!
How can I install software on a disk?
1. Insert the CD/DVD
2. If the CD is not automatic open start Windows Explorer - click on start, then click computer.
3. in the Windows Explorer window, open the drive that contains the installation files. For example, if they are on a CD or DVD open that drive or the letter of the disk drive.
4. in the disk that contains your files, look for either a configuration or installation of the file. Double-click on this file should launch the installation of the program, a game or utility. If you see more than one configuration or install files, try to locate the file for the Application, double-click each setting or install files until you find the file that starts the installation.Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses -
I have CS5 which does not seem to handle the FIRST for Sony RX100M3. Don't CS6?
I use a 10.9.5 OSX computer
I use photoshop CS5, which does not seem to handle the FIRST for Sony RX100M3. Don't CS6?
Although photoshop cs5 will not open files Sony RX100M3 camera raw, you can use the adobe dng converter to convert them to dng best, which photoshop cs5 should then open.
Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.1.1
Camera Raw: How to use Adobe DNG Converter - YouTube
Regarding photoshop cs6, Yes, it will open these files with the 9.1.1 update to the camera raw plugin, but I would consider the plan of creative photography of cloud
instead of buy photoshop cs6, since adobe very probably won't be updated photoshop cs6 more including the new cameras camera raw plugin.
http://www.Adobe.com/creativecloud/photography.html?promoid=KTMBM
-
ThinkPad 560 X - How the hell do you have the CD of external work?
I just bought a 560 X used to use a development for Windows 98 computer.
HARD drive was empty. I am looking for the external CD (P/N 1969-010) to work.
I installed DOS 6.22 software then Cardsoft for DOS. When I inserted the IBM IDE PC card, the system emits a signal indicating that it has recognized that a card has been inserted, but nothing else happens.
I have tracked down a lot of files to options/install/etc on the support site but have not yet tried all the.
Will try to install Windows 3.1 and using some install files for Cardsoft for 3.1 but I guess just at present.
I have the impression that there should be an installation file/program for the CD itself, but did not find one that looks right.
I just want to get the CD to work so I can install Windows 98. Then I need to be able to use the CD with Windows 98.
Any suggestions?
Solved by myself - after a few permutations.
(1) installed BACK 6.22
2)
Using another system, I find the driver on the Lenovo site,
files for CardSoft for DOS (pctpcdos.exe) and IBM 20 X Max Portable
P/N 1969010 (820xnosd.exe) CD-ROM driveThese two files are self-extracting compressed files. Execution of creates them a diskette in A:
(3) BACK started on the Thinkpad X 560
(4) Insert the diskette for Cardsoft created by pctpcdos.exe software.
5)
Install.exe Ran from the diskette. This installs BACK support for the PCMCIA
cards. In this case, we want to use the IBM IDE PC Card used for
connect the CD to the 560 X.(6) switched disks, inserted the diskette created for CD 820xnosd.exe
7)
Passed to A: and run install.exe - important, for some reason any
the installation program does not run correctly unless you switch to the A:
drive. Using A:install does not work. You do A: the current
drive.(8) the CD is now available at BACK
(9) copied all the contents of a Windows 98 installation CD into a directory named WIN98CD hard disk
10) ran Windows Setup from the hard drive.
11)
After the installation is complete and has detected all new
material, I used the point to install new hardware from the control panel
looking for a new material that was not installed.(12) the CD
has been located. I put the Setup CD disk (created in step 2 of the)
file 820xnosd.exe) and made the installation of the driver to the A: drive.
Windows finds the correct driver and - hop, the CD player is now
recognized and is usable from Windows 98.After getting the CD
working, I used the other drivers that I found during my search of the
Lenovo - things like audio and video - site and install them.Here
is a complete list of the files that I downloaded from the Lenovo site. They
include various support for BACK, Win3.1, Win95 and Win98Note-
the date and time are the date and time when I downloaded the files to
my system, not the date and time of the file on the Lenovo site.Short name Size Date Long Name--------------------------------------------------------383956HW PDF 40,866 10-06-08 6:58p 383956hw.pdf560XHMM PDF 1,032,670 10-06-08 7:08p 560xhmm.pdf56XUSE~1 PDF 1,593,876 10-06-08 7:09p 56xusergd.pdf820XNOSD EXE 236,610 10-08-08 3:33p 820xnosd.exe820XSND EXE 858,933 10-08-08 3:49p 820xsnd.exe820XSND TXT 54,402 10-08-08 3:29p 820xsnd.txtAFTPRW31 EXE 996,352 10-06-08 6:24p aftprw31.exeAFTPRW31 TXT 2,597 10-06-08 6:22p aftprw31.txtAFTPRW95 EXE 621,568 10-06-08 6:30p aftprw95.exeAFTPRW95 TXT 4,121 10-06-08 6:28p aftprw95.txtD3Q1CMST PDF 3,766,792 10-08-08 4:04p d3q1cmst.pdfIRTPRDWO EXE 240,313 10-06-08 6:32p irtprdwo.exeIRTPRDWO TXT 10,240 10-06-08 6:31p irtprdwo.txtKXP101WW TXT 6,239 10-08-08 2:55p kxp101ww.txtPCTPCDOS EXE 747,834 10-06-08 6:35p pctpcdos.exePCTPCDOS TXT 3,722 10-06-08 6:33p pctpcdos.txtPCTPCW31 EXE 1,099,606 10-08-08 2:10p pctpcw31.exePCTPCW31 TXT 3,754 10-08-08 2:07p pctpcw31.txtPCTPGW95 EXE 834,271 10-08-08 2:19p pctpgw95.exePCTPGW95 TXT 13,023 10-08-08 2:18p pctpgw95.txtPCTPIWDS EXE 57,339 10-08-08 2:56p pctpiwds.exeSG245294 PDF 4,079,144 10-08-08 4:21p sg245294.pdfSPSDI833 EXE 486,851 10-08-08 4:23p spsdi833.exeSPSDI833 TXT 8,205 10-08-08 4:21p spsdi833.txtTHS6017F PDF 111,734 10-06-08 7:01p ths6017f.pdfTPP95RLD EXE 839,220 10-06-08 6:50p tpp95rld.exeTPP95RLD TXT 1,891 10-06-08 6:44p tpp95rld.txtUTTP2W31 EXE 1,428,480 10-08-08 4:19p uttp2w31.exeUTTPFDOS EXE 349,563 10-06-08 6:36p uttpfdos.exeUTTPFDOS TXT 6,660 10-06-08 6:34p uttpfdos.txtUTTPFPER EXE 109,134 10-06-08 6:40p uttpfper.exeUTTPFPER TXT 2,704 10-06-08 6:38p uttpfper.txtUTTPFW31 TXT 7,772 10-08-08 4:06p uttpfw31.txtUTTPFW98 EXE 7,348,900 10-06-08 7:19p uttpfw98.exeUTTPFW98 TXT 8,799 10-06-08 6:36p uttpfw98.txtUTTPPERD EXE 129,634 10-06-08 6:41p uttpperd.exeUTTPPERD TXT 2,367 10-06-08 6:38p uttpperd.txtVFTPI89M EXE 429,377 10-06-08 6:55p vftpi89m.exeVFTPI89M TXT 7,678 10-06-08 6:49p vftpi89m.txtVFTPXW31 EXE 810,712 10-06-08 6:54p vftpxw31.exeVFTPXW31 TXT 2,484 10-06-08 6:44p vftpxw31.txtVOL4HMM PDF 8,194,060 10-08-08 3:53p vol4hmm.pdfW95SFD56 EXE 262,355 10-06-08 6:58p w95sfd56.exeW95SFD56 TXT 6,078 10-06-08 6:55p w95sfd56.txt
-
More code D8 which do not work in D11.5 - need help?
OK, I have made progress, but continues to meet labour D8 apps that will not run in D11.5 code. I was able to fix a few myself and others with the help of others including Sean.
Now I am seeing that the windows have been changed and communicate in a MIAW created in step has also been changed. I have been searching for books online for the last two hours, but can't find any reference to the scene. I see that it is gone, and there are some new movie references ('step'), but nothing that helps me tell the scene of a MIAW to get another shot. Can you please help me replace the code in non-working marked below. It's in a MIAW called tutor.dcr attached to another > button. Wen I got to page 3 in tutor.dcr, I want the scene to goto tutorial1.dcr, but nothing happens:
slider 4
tell the cursor 4 scene - it does not work
tell the scene at gotoNetMovie (field "urlpath" & "tutorial1.dcr") - it does not work
The documentation has not helped me. Maybe I'm missing something. Can you please tell me what code replaces the two D8 above lines that do not work in D11.5?
Thank you!
p. s.
I'm getting closer (after two days of searching now and are looking everywhere for a MIAW code examples, but still can not find how to say stage)):
(the scene). ?
It would have been nice if Adobe had placed Tell in their new documentation says its obsolete (not) in _movie where I found after five hours of searching, and had placed a few examples of how to replace your MIAW code communication. Examples of the new using Director 11.5 are not useful (for me).
Now, I found about 400 cases of Tell in one of my educational apps that need to be changed. I've been using D8 for 10 years. For anyone else who needs to change their Tell commands here are some I found:
A: set the WINDOWTYPE to 0 (field "urlpath" & "icauditprogramf05.dcr") window
Had to put in place: window("icauditprogramf05.dir").type = #document
A: tell window (field "urlpath" & "icauditprogramf05.dcr") to go to box 4
Had to change to: window (field "urlpath" & "icauditprogramf05.dcr").movie.go (4) - I do not understand fully all syntax to point you again and it is so amazing I figured this out!
No problem!
For some reason, ("stage") window or the window ("name") does not work for me. It is same in the Adobe documentation it and then it "should.". When you run theoffice.dcr with tutor.dcr in a MIAW and I put the list in the window, I see only the window "tutor.dcr". No scene or reference to something else. To fix, I've substituted: (the scene). Movie.Go(1,tfile) I was also able to tell the stage to change the cursor by substituting (stage).movie.cursor (4)
Well anyway you suggestions were much appreciated and very useful as usual and got me on the right track - thank you as always!
Oh and one more strange thing the Tell command which is supposed to be obsolete and did not work in one of my scripts is currently working in three other places with
tell the scene at gotoNetMovie (field "urlpath" & "tutorial1.dcr"). So tell us can works or does not work (just for your reference) and I can't explain why.
-
How can I change the permissions? His does not work.
If this problem occurred when I tried to change the icons on my mac. The apps that I downloaded as pages, spotify, google chrome, etc have been changed without problems. (I used the method where get you information, then paste in). But when I went to change the icons of the apps that came with my computer such as safari, messages, photos, etc., that it did not work. There was no option to paste into the file menu and when I did command + v he comes to make a noise. So I googled how to change safari icon and it says that I have to change permisions. That's where the problem came. I pressed get info on safari and went down to the right, then I clicked on the lock and entered my password and the unlocked locking. But then when I went to the control panel and selected "reading and writing" in all he did not. He three get out a message that "the operation cannot be completed because you do not have the necessary permissions. Things to note are that in the permissions Panel my name and (I) was not under the name column. I am the sole owner of this mac and I don't know whats going on. Any help would be appreciated. Thank you!
I think you're probably be lived this because of SIP (Protection of the integrity of the system). This was introduced in El Capitan (10.11).
Maybe you are looking for
-
Compaq 6200: Grahpics card Compaq upgrade 6200
I spent 3 hours searching. So many different customers, so many cards, so many questions. I don't want to waste money because I searched all stores in my area. Wal-Mart, Best Buy and a few private belonging to used computer stores. The pc I have is c
-
cannot purchase itunes gift card from itunes more
Help! I used to could go to itunes and buy gift (amounts of everything I wanted) and then even print copy or sent by e-mail, but now I see now the place to do that, I don't want fixed allocation or just send a song special gift or a list, I would li
-
Passport BlackBerry how to remove blackberry ID
I just bought a blackberry passport and my 1st time using blackberry. Creating blackberry ID I gave a wrong email address that I don't own, and the system does not check the validity. Now I can't reset my password and they will send the link for rese
-
Hello is there a way to implement the player controls (play, pause, stop,...) as those used in the drive multimedia blackberry shipped for use with the Player object? More in detail, how can I show/hide commands? Pushing another transparent screen co
-
Last week, I went to change my theme. The entire page is black and white, all themes are blackened and can not be used. When I download other themes and try to use them, I get an error saying "this theme can be used... "It is a system of HP, with a c