How do I report an error?

Similar Questions

• How can I report an error in Windows 7 64 - bit Windows Update?

  I'm trying to figure out how to get a bug... you guys really should facilitate this.  I get message center alrets asking me to set my preferences up to date.  They have been defined many times and I really can't say whether they are actually defined and remebered or windows is not grateful, they have been defined.  I know that you do not technical issues here, but can you please direct me to the avenue good report.  Thank you!

  Windows 7 64 bit
  Build 7100
  Ausus M3N72-D
  AMD Phenom 2 quad core edition Black 950 (3 ghz)
  8 GB RAM
  750 GB sata HD
  Plextor sata dvd - rw
  BFG nVidia Gforce GTX 285 OC with 2 gigabytes of ram

  Hello

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I report an error in the cmdlet new - vm, when try/catch catch him?

  
  I used PowerCLI 5.0.1 and tries to add a processing error on the create a new virtual machine.  My try/catch block doesn't seem to be jumping to catch code.

  try {}

  new-vm-name badvm - vmhost "10.10.1.1" datastore - bad

  ECHO "inside to try"

  }

  catch {}

  $msg = $_. Exception.Message

  ECHO "inside wrestling"

  echo $msg

  }

  When I run the present, I get the appropriate error «...» Cannot find StorageResource with the name of 'bad '... ' appears on the screen and the text ' to try '.  I expect to fall into the Catch code.

  The host is valid and connected; so, it seems that the new - vm cmdlet Gets the host - successfully - and then the host will return the error, but don't know the code to Catch.  Could the successful connection be confusing wrestling?

  I thought call get - vm with the name and check if it was created, but I would like to tell you the cause of the failure.

  Thanks for any help,

  Maureen

  You could add -ErrorAction stop to this cmdlet.

  Or to investigate the content of $error [0] after that you call the cmdlet

• whenever I try to certify a document using my E-token brazilin, it appers: the windows cryptographic service provider reported an error. Code: 2148073510. Someone knows how to fix this?

  I would be grateful if someone could help me. Every time I try to certify a document using my E-token brazilin, it appears: the windows cryptographic service provider reported an error. Code: 2148073510. Someone knows how to fix this?

  Problem of this sort occurs generally when the driver that supports your token is not fully compliant with all standards. Some signature applications are mild for some of the discrepancy and you can still use your signature token in these applications. Acrobat is more strict about this.

  Without actually having your token, it is difficult to continue the investigation.

• I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I hav

  I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".

  Interestingly, if I copy and paste your images into a new doc 2 points scored.

  I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.

• Firefox answers more frequently. I have several reports of errors but don't know what to do with them.

  I have several reports of errors, but I don't know how to reach them. I hope someone can help me with this all out.

  Have you checked this thread?
  https://support.Mozilla.com/en-us/questions/859406

  I had a similar problem, and he treated this thread.

• website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

  website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

  This has happened

  Each time Firefox opened

  is after upgrade to 3.5?

  http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

  You create a new profile and install only the extension Web Developer, as recommended Chris?

• How can I report an impersonator, quickly and directly to Microsoft Security?

  In 2006, I became aware of my early days of nightmare of identity theft. It has been a difficult since, battle with the wonderful support and guidance of personal bank, company credit and other supporters who have helped me during my recovery after a personal loss. These criminals in cyberspace have also stole my time and finances. Is there a quick way to receive help, support Technique were wonderful when it is able to connect.

  Prove to Google, Yahoo, Firefox and many others that I was the real deal, has been no picnic - with endless forms being filled, change the information often, then several times don't know if I was on a satirical page and the data for "The Enemies."
  I have seen today, how they already put counterfeit copies of my website logo and another photo, I used on a Google page + to add to their gallery. Also collect data from another another SEO, including Microsoft Security appears to have locked my IP address to enter, as to receive reports of errors. I think that it is these criminals who are behind all the attacks of phishing on me, my family, friends, potential customers. My fight against the damage and restore my reputation on the Internet has been a very long and costly process.
  Microsoft Security - thank you very much for have not entered me many sites. Microsoft team! Great job on the comparison S.W.R., old & new. Much easier to read and understand.

  Hi Kim,

  I suggest you follow the links below:

  Phishing: Frequently asked questions:

  http://www.Microsoft.com/security/online-privacy/Phishing-FAQ.aspx

  How to report a phishing Web site:

  http://support.Microsoft.com/kb/930167

  Scams by e-mail or web: how to protect yourself:

  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  I hope this helps.

• Today I received a phone call from 'Human IT Solutions'. The operator said that I had reported an error and asked me to log in

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  ADF, I received today a similar appeal.  When I questioned his information on the company, he was very defensive and said "I have no cold calling, I'm in East London" I asked him to give me the name of the software MS causing errors, during which he compiled a long list of file extensions and avoided the question.  When I asked her name and phone number so I can get my husband to call him back, he began to read a number on phone, but the figures '0-1', the line was cut off.

  I'm sure you made the right choice in putting an end to the conversation of what I lived today.  I have no idea how you would report to Microsoft, but wanted a response to you here to support your actions!

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Sending ' reported an error (0x800CCC69): "the server responded: 550 IP address 78.150.58.218 in XBL'"

  Although I am able to receive emails Outlook 2007 will not send any emails and let this error message: sending ' reported an error (0x800CCC69): "the server responded: 550 IP address 78.150.58.218 in XBL'"

  Can anyone advise me as to why this is happening and how to put this right?

  Thank you for your support. The problem is solved mysteriously himself.  I'll keep your advice where I have the same problem in the future.

  Thank you very much

• HRESULT was 80070437 line 45 of d:\longhorn\com\complus\src\events\tier1\eventsystemobj.cpp. Contact the Services de Support technique Microsoft to report this error.

  It is a mess that everything seems to have something to do with the user unknown, profile and permissions?  I do not know

  This first paper below, is the 4th down from the top of the stack of the event view administrator. I posted it all initially due to 'please contact Microsoft Product Support Services to report this error.' requested in this journal

  Log name: Application
  Source: Microsoft-Windows-EventSystem
  Date: 2011-08-20 15:23:12
  Event ID: 4609
  Task category: event system
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Diane
  Description:

  Internal system of events from COM + has detected what a bad code back during his treatment.  HRESULT was 80070437 line 45 of d:\longhorn\com\complus\src\events\tier1\eventsystemobj.cpp.  Contact the Services de Support technique Microsoft to report this error.
  The event XML:

  
   
     
      4609
      0
      2
      16
      0
      0 x 80000000000000
     
      36861
     
     
      Application
      Diane
     
   
   
      d:\longhorn\com\complus\src\events\tier1\eventsystemobj.cpp
      45
      80070437
   
  

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Log name: System
  Source: Service Control Manager
  Date: 2011-08-20 16:51:03
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Diane
  Description:
  COM event system service + could not start due to the following error:
  The account specified for this service is different from the account specified for other services running in the same process.
  The event XML:
  
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      390554
     
     
      System
      Diane
     
   
   
      System event COM +.
      % 1079
   
  

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Log name: Application
  Source: Microsoft-Windows-CertificateServicesClient-registration auto
  Date: 2011-08-20 01:24:41
  Event ID: 64
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: n/a
  Computer: Diane
  Description:
  Certificate for the local system with footprint 4 7 54 42 2 a 43 1 a 20 36 77 0e b2 fa 58 58 44 cd fb db is about to expire or already expired.
  The event XML:
  
   
     
      64
      0
      3
      0
      0
      0 x 80000000000000
     
      36700
     
     
      Application
      Diane
     
   
   
      local system
      7 4 c a 54, 42, 2, 1 has 43 20 36 77 0e b2 fa 58 fb 58 44 cd db
   
  

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2011-08-20 15:23:12
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Diane
  Description:
  DCOM got error "1079" attempting to start the service EventSystem with arguments "" to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}
  The event XML:
  
   
     
      10005
      0
      2
      0
      0
      0 x 80000000000000
     
      390544
     
     
      System
      Diane
     
   
   
      1079
      EventSystem
     
     
      {1BE1F766-5536-11D1-B726-00C04FB926AF}
   
  

  Keep aside the papers, there are real problems with your computer?

  If so, can you describe the same thing in short?

  "Please contact Support Services Microsoft support to report this error." is a robotic message and generic. Nothing spectacular as such.

  In the meantime, scanner SFC on your computer:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• HP Color LaserJet M476nw MFP: Scanner reported an error - HP Color LaserJet M476nw MFP

  I had problems with the HP scanning software.  When I run the software and try to initialize a scan, I get the message

  =====

  Scan reported an error

  HP Color LaserJet M476nw MFP is currently unavailable. Please check if it is connected and turned on, or try again later.

  =====

  In fact, the scanner works fine, like I can scan documents directly to the USB port on the printer.  The scanner has worked in the past with the HP software on my computer, but now just won't work.  The printer is also properly connected to the computer as I have no problem with printing of documents.

  No idea how to fix this?

  Thank you!

  Hello

  Try to install the following package to make sure that your drivers are perfectly up-to-date:

  https://support.Apple.com/kb/DL907?locale=en_US

  Then restart your Mac and try to scan the image.

  If the same persisnts open the JSCA-Packard folder and move the HP scanning application to the trash.

  Then install the HP Easy Scan app instead (which is the latest version of HP scanning):

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now try scanning using the application and check for the difference.

  Please let me know the results,

  Shlomi

• I have this 8024D00A on my windows update error how can I fix this error?

  How can I fix the error 8024D00A as poping up keep it up on my windows update?

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• ATI Mobility radeon HD 4500 series reported an error code 43 and he he had stopped working, so my printer Laserjet M1132 MFP had stoped printing.

  My computer said that ATI Mobility radeon HD 4500 series reported an error code 43 and he he had stopped working, so my printer Laserjet M1132 MFP had stoped printing. How can I make it work againg?

  SHELF MODEL: tm2-1010ea

  SERIAL NUMBER: CNU0290H5H

  Any required driver updates should come from your support site for PC manufacturers, HP? and not Ati or windows update