How do the 4000th Equallogic Installer management ports

Similar Questions

• V14 said that my droid2global is not compatible, but the beta installs fine, how is the official download installs?

  V14 said that my droid2global is not compatible, but the beta installs fine, how is the official download installs?

  I can see and download it now from the game of Google. crocadileut can you check again?

• After you have uninstalled the trial version, Installation Manager will let me install my paid versions.

  I used to have a trial version of CS6 Master Collection that I uninstalled when she came running and then took advantage of designer Cloud student deiscount. Now, I'm trying to install the applications that I need, Illustrator, Indesign and Photoshop, but for all applications which I have already had a trial version, Installation Manager tells me there is an existing installation (even if they were all uninstalled and my uninstall program to remove all traces of applications) and now the Installation Manager will not let me install applications...

  On a side note, I'll say it's nice that Adobe does not all customer support the weekend either, their programs seem you easier to use illegally and then use legitimately.

  -I thank you in advance for any help you can provide!

  Run the vacuum cleaner: http://www.adobe.com/support/contact/cscleanertool.html

• I want to ask how much the end of Installation of windows 7 take after some time, I received a message says "windows setup configure windows to run on a hardware on this computer." could not

  the computer is new and it was to win 7 top before I did the format

  Hello Baron Belal,

  Since your computer is new, contact the computer manufacturer to get the recovery disks. You can have a recovery on your computer partition to use instead of the discs. Look at your documentation or contact the manufacturer. It should still be under warranty.

  Let us know if you have any other questions.

  Marilyn

• How does the online Flash Player Settings Manager?

  That's one thing, I've always been curious to know: How does the Flash Player Settings Manager ?

  It's a UI SWF running in a regular reader of Flash, but there obviously access to all kinds of Flash Player settings low level, a typical SWF is not.

  My first guess is that the user interface is in fact built into Flash Player, but then why would you go to visit a website to see? The SWF file is actually be served by the site Web and Flash Player's trust to the Web site to access a low level player not made public API?

  As a Flash developer for many years I've just been curious about this for a long time. Now that the Manager is obsolete by the construction in the settings (which is a lot less mysterious) Manager, I thought I would ask before it is completely forgotten.

  -Aaron

  Yes, the SWF is imbued with special powers, which are linked to the domain that sovereign wealth funds are served from.  The settings are basically just special LSO.

• Check the configuration of my management network please?

  I'm working on the settings described in this article of yellow brick, but I don't know that I was right;

  http://www.yellow-bricks.com/2011/03/22/ESXi-management-network-resiliency/

  I have two vmnic added to vswitch0, vmnic0, and vmnic10.

  

  I have this vswitch groups of two ports, one for vmk1 vmotion and the other for management vmk0.

  Tab grouping the vmotion port group NIC I specify vmnic10 as an active adapter and vmnic0 as before with backspace set to no.

  

  On the NIC teaming tab management port network group I do the opposite, vmnic10 is in standby and vmnic0 is active, but with BACKSPACE value again.

  

  Is it OK so far?

  What I am ultimately confused by vswitch NIC teaming tab configuration is two adapters program active since they are each active for a group of different ports this vswitch? and should restore the value not in this tab as well?

  

  Thanks for any help you can provide.

  The first thing I noticed: you use the same subnet for your management and vmotion traffic.

  Use VLANs and put on separate segments (vMotion traffic is not encryted).

  Kind regards

  Mario

• How to activate the database from Enterprise Manager Grid 12 c EBS 12.2.5

  Hello

  I have a question how do I activate the enterprise Grid Control on the 12 c database manager.

  Now, I was demanding to activate the database of EM 12 c on EBS 12.2.5 grid control. Already tried to emca, but showed nothing to configure?

  Please help me how to activate this feature?

  Thank you

  Andreas Kuncoro

  Hi Christophe,

  Thanks for your info. I already activate.

  Thank you.

  for retail, the step:

  Enable Enterprise Manager on Oracle E-Business Suite with database 12.1.0.2

  Concern about the listener and the database only.

  1. check the listener

  $ cd $ORACLE_HOME/network/admin/VIS2_miiexa01 /.

  $ more tnsnames.ora

  ###############################################################

  #

  # Do not change the settings in this file manually. They are managed

  # automatically and will be overwritten when executing automatic configuration.

  # For more information about automatic configuration, see the Oracle

  # E Business Suite Installation Guide.

  #

  $Header #: NetServiceHandler.java 120.28.12020000.6 2014-05-14 07:55:23 mmanku ship $

  #

  ###############################################################

  VIS2 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  (CONNECT_DATA =

  (SERVICE_NAME = VIS2)

  (INSTANCE_NAME = VIS2)

  )

  )

  VIS2_FO =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  (CONNECT_DATA =

  (SERVICE_NAME = VIS2)

  (INSTANCE_NAME = VIS2)

  )

  )

  VIS2_LOCAL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  )

  VIS2_BALANCE =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (LOAD_BALANCE = YES)

  (FAILOVER = YES)

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = VIS2)

  )

  )

  VIS2_REMOTE =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  )

  )

  VIS2XDB =

  (DESCRIPTION =

  (ADDRESS =

  (PROTOCOL = tcp)

  (HOST = miiexa01.vision.co.id)

  (PORT = 1529)

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl12XDB)

  )

  )

  extproc_connection_data =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROCVIS2))

  )

  (CONNECT_DATA =

  (SID = PLSExtProc)

  (PRESENTATION = RO)

  ) )

  IFile=/Home/VIS2/12.1.0/Network/admin/VIS2_miiexa01/VIS2_miiexa01_ifile.ora

  2. check the database

  $ sqlplus / as sysdba

  check port https already set to EM

  SQL > SELECT 'https://'|| SYS_CONTEXT ('USERENV', 'SERVER_HOST') |'. ' || SYS_CONTEXT ('USERENV', 'DB_DOMAIN') |': ' | dbms_xdb_config.gethttpsport () | "/em/' double.

  SQL > SELECT 'https://'|| SYS_CONTEXT ('USERENV', 'SERVER_HOST') |': ' | dbms_xdb_config.gethttpsport () | "/em/' double.

  using the https protocol to open a session on EM

  SQL > exec dbms_xdb_config.sethttpsport (5500);

  Changeinit .ora

  $ viinit .ora

  Add the new line oninit .ora

  Dispatchers = "(Protocol=TCP) (SERVICE =XDB)" "

  Restart the database for changes in the init.ora file take effect.

  SQL > show the extreme setting

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  chain of dispatchers (PROTOCOL = TCP)(SERVICE=VIS2XDB)

  whole MAX_DISPATCHERS

  SQL > exit

  Thank you

  Andreas Kuncoro

• How to connect the sd/mini/mmc/rs port?

  Original title: sd/mini/mmc/rs
  How can I reconect the port to place photo on the side map is written: sd/mini/mmc/rs?

  Hello

  ·        What exactly is the problem that you are facing?

  ·        What happens when you connect the port on the computer?

  ·        The card reader appears in Device Manager?

  ·        If it is attached to the computer via a USB port?

  ·        You did changes to the computer before the show?

  Method 1: Run the fixit provided in the link and check if it solves the problem:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: If it is attached using USB then I suggest you to reset the USB controller and check if it helps:

  a. type devmgmt.msc in the start search box.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and then reinstall the USB controllers.

  e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

• How do the management interface of configuration of an ethernet interface?

  We have an ASA 5540 requiring a LAN port for failover. And the left side of the interface available only the management port. How do the management interface of configuration of an ethernet interface?

  You can disable the mode of management only on this interface to make as regualr routable port and use for other purposes, including the purposes of failover LAN database.

  On the management interface - 5510 but applies generally to the management0/0, itself including 5540

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

  Basic LAN failover configuration

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

  Rgds

  -Jorge

• HP DL380p G8 - packets ignored on the management port but not the virtual computer.

  I searched through discussions, but not found a request for my problem.

  We have added two new guest VM in the center of the customer data. Currently, they had 2 x DL380 of the G7 which worked perfectly for 2 years. We have added two new DL380p G8 and have some weird dropouts on the management ports. Currently using SAS-store data (no SAN or iSCSI)

  I have pre configured servers (2008 R2 on each single guest) before their move in the data center using ESXi 5.0.2 http://h18004.www1.hp.com/products/servers/software/vmware/esxi-image.html HP installation. Since we moved to the datacenter, however, the new servers to experience about 10% loss/fall of package to the management port IP, but 0 packet loss on the IP comments. It doesn't make a difference either if the management port and the vswitch are on separate NIC interfaces, same result when combined on the same network adapter.

  The Guest VM seem to work well and are not affected by the present, but any P2V we are trying to do currently fail due to loss of packets on the management port.

  Other host (DL380 G7) servers running the HP exsi distro 5.0.0 and don't suffer these questions.

  Any advice would be appreciated. I wanted going 5.1 because when I was configuring initially I wasn't aware that there was an application of conversion of VMware for him - it seems now exists, so if you think 5.1 is the answer, then I'm happy to go ahead and do it.

  I solved this problem, but thanks for all the help...

  Note for all the other people there. If you clone an esxi installation SD or USB or else save time, the MAC addresses of the server of origin met on the new server, regardless of the different physical MAC address.

  To resolve I had to run esxcfg-advcfg - s 1/Net/FollowHardwareMac on the server that had double MAC address list.  All the VMnic (4) in both servers had the same Mac as well just change the port not fix her. A new card would have solved my problem, but does not solve the problem.

  The problem was discovered running by displaying the ARP table.

• How can I start the BI and ODI Managed Servers?

  Well,.

  I read at step 4 of Doc-ID 1589540.1 the following:

  "BI applications requires the BI and the ODI Managed Servers (bi_server1 and odi_server1) should be started via the node Manager. This setting is required for settings, memory, and jvm arguments are correctly defined.

  Starting not not the BI and managed servers of ODI can lead to memory problems and the loss of functionality BI Applications Configuration Manager, the Manager of functional installation and ODI.

  To ensure that the BI and ODI Managed Servers are started through the node Manager, start using the Console of Administration WebLogic user interface.  Do not start the BI and servers managed by ODI by using the managed server start script. »

  Well, as I'm new Weblogic management, then, what are the steps to start all of the services?  (I have OBIEE, ODI and Bi Apps on the same server).

  I mean, was that you should not start their script. What is the proper sequence and how should I do this?

  Could someone help me on this?

  Thanks in advance...

  the appearance of the home screen for environment-> servers-> here you will see the admin and managed servers-> click the tab control and then check off the boxes related to managed servers, and then click start that's all

• How have the Linux database server listener listen to the service in the Net of Windows XP Client Manager?

  People,

  Hello. I installed Oracle 11 GR 2 database server in the Oracle Linux 5 operating system.
  All customers (NetCA, DBCA, GROUND Deveoper, sqlplus...) works properly on the database server. The LISTENER_PT853 listener is listening on client tools under Linux successfully.

  
  I also installed Oracle database Client(SQL Developer, NetMgr, NetCA, sqlplus,...) in Windows XP. So that the client tools to connect to the database on Linux server, the listener in Linux must be tuned to the service in Windows XP.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port: 1521

  
  Listener: LISTENER_PT853
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I have test the Service PT853 with "SYS" username and password "SYS." The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is lower at:

  
  Service name: PT853_Linux
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port: 1521

  
  I test the connection by using "SYS" username and password "SYS" and got this error: ORA - 12514:TNS: listener does not currently of service requested in connect descriptor. There may be an error in the input fields or server may be ready to connect.

  
  Can I check the status of the listener in Linux Server machine as below:

  [user@localhost bin] $. / lsnrctl status LISTENER_PT853

  Its release: Service PT853 has 1 instance. PT853 of the Forum, State LOAN, has 1 handler for this service.

  
  Foregoing, we saw the listener in the Linux server machine only to listen to the PT853 service in Linux but not to listen to the service PT853_linux of the Windows XP client computer.

  Windows XP (192.168.196.101) and Linux (192.168.196.102) can ping each other successfully. So that client tools in Windows XP connection in Server database on Linux, the listener in Linux need to listen to on the service in Windows XP first.

  In Net Linux Manager, I add an address more (TCP/IP, 192.168.196.101, PORT 1521) to LISTENER_PT853, but gets the error.

  
  My question is:

  How have the Linux database server listener listen to the service in the Net of Windows XP Client Manager?

  
  Thanks in advance.

  UserAL1178M wrote:

  Hi you ave create listener.ora.

  Actually, no he didn't "need to create listner.ora.

  In fact, its problems stem from the fact that it * has * created one instead of letting some things by default.

  I give an example of my environment

  [oracle@home ~] $ cd /home/oracle/app/oracle/product/11.2.0/dbhome_1/network/admin/

  [oracle@home admin] $ cat listener.ora

  listener.ora # Network Configuration file: /home/oracle/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = home.test.al))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl.test.al)

  )

  )

  ADR_BASE_LISTENER = / home/oracle/app/oracle

  [oracle@home admin] $

  Change host, name of service depending on your environment. Your port is 1521.

  Then, first run all the listener and database startup. If you do the opposite, with that you will need to register the service change the order of system registry.

  Let me now if you need another sth

  Kind regards

• Installation Manager requires to close PhotoshopServer and dynamiclinkmanager, but how?

  Hey there everyone,

  Santa told Photoshop and first Elements 10 for my Mac and I m try as hard as I can to operate on my iMac...

  The biggest problem is:

  Installation Manager requires to close "PhotoshopServer" and "dynamiclinkmanager" and guess what: I have don´know how f * king close them! (please forgive my cuss but I m done)

  It would be incredible if West anyone who can solve my problem for/with me!

  Simon Best

  Hello

  Have you had an older version of Photoshop installed on your Mac?

  First of all, restart your computer. So before you start the installation, go to the "Activity Monitor" on your Mac. (can be found under utilities).

  Once you open the activity monitor, select "All processes" in the drop-down list at the top.

  Search for Photoshopserver and dynamiclinkmanager in the list of processes.

  Select them and click "exit".

  Try to reinstall Photoshop.

  Let us know if you continue to face the same question.

• How do I access the password for Lightning Manager?

  Hello, all.
  I'm trying to connect my lightning calendar to google calendar using CalDav.
  I'm following the procedure described in this guide: http://www.technorms.com/7955/sync-google-yahoo-windows-live-calendars-thunderbirds-lightning
  I got to a point where I entered my google username and password.
  But the calendar does not load.
  So I thought that the problem is that I entered my user name for google as "username", not "[email protected]".
  Then I tried to change it, I deleted the calendar I made and then tried the process again.
  But I had saved the username and the password in "Password manager"

  My question is how to access the password manager? And then how to remove this info so it is no longer stored? So, I try again, the process of "[email protected]" instead of "username" when you are prompted for authentication by google's step in the instructions above.

  Thank you!

  The URL of the calendar in the article you mentioned is exceeded.
  Check this blog and follow the instructions.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

  The lightning is not a separate password manager. Follow these instructions for the removal of the existing passwords.
  http://KB.mozillazine.org/Setting_and_changing_email_passwords

  Also, be sure to allow cookies for google.com.

• How long the Messages keep history to Yosemite? I know for iDevices you can choose between 1 month or 1 year but I wonder about the way it manages the Mac...

  How long the Messages keep history to Yosemite? I know for iDevices you can choose between 1 month or 1 year but I wonder about the way it manages the Mac...

  Messages or e-mails?