How do the count meter or begin at different times

Similar Questions

• How to create an application to display the 3 windows of each with different time zones as the window?

  Hi, I need to create a windows application using c# that will create three windows that display areas and the current time, the title of the window?

  PS: I use an event handler to update the current time.

  Hello

  To improve assistance to this subject, you can ask your question in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en/category/visualcsharp

• Start the 2 layers of text at different times

  Hello

  I have 2 text layers each with the underscore preset animation. They are both located in different places on the screen. (1 left upper and one lower-right)

  I can't work how to do what they trigger at the same time.

  upper left corner should appear close to beginning of composition then stay on until the end, down right needs fire to say 50% then stay on for the rest of the clip.

  I tried to add keyframes at the beginning and end of the options, but it did not work.

  Thanks in advance

  Todd

  Move Clips in the layers to different 'start' (timeline) points.

• How do I either set channel name of a graph of cluster or get a 1 d waveform chart to start different time (t0) for each line of the waveform?

  I have a chart single 2D out a conditional of a loop indexing output such that over the rows of the table are not the same size. -Basically, they have different starting and ending points and sizes. -Not so concerned by the endpoints, because as soon as I get correctly starting points, everything shows fall in place.

  The challenge is that when I try to have the variable t0 (start time) for each line, the wave of construction vi form would always keep each line at the same starting point.

  I used the approach bundled with success (the cluster approach ensures that each waveform starts at different times according to the guidelines of my t0 defined for each line) but then I'm not able to get in the channel names I could make using the graphical approach (wave generation) waveform.

  In essence what I get here, I'm losing here.

  Because I don't want one of my mentors, Bob and Altenbach have fed up with me I have attached a vi this time

  Attached VI shows a combination of the two attempts (first with the waveform graph) and then with the graph of cluster

  1. with the first (graphical waveform), I get my channel names as you wish, but the alignment of the wave is not correct.

  2. with the second (graphical cluster), the alignment is good, but I can't do the names of channel in the chart, even if they are present in the cluster.

  I read some reviews that mentions that attributes can be displayed with waveform and data Dynamics (not clsuters) so I guess that's why.

  I saw another report indicating the start time for a waveform 1 d will always remain the same for the rest lines defined for the first line even if changed for the following lines in a loop.

  So I guess my question is: what is the way around questions like that?

  First of all, let me be the first to the congratulate and thank you for finally posting a code!  I'm not 100% certain I understand your question or your code, but I have an idea, perhaps, of what you want to do, so I wrote a little VI who made something simple that could be relevant.

  You mention waveforms of different lengths and beginning at different times.  You also want everyone to have a unique attribute (although I'm not sure what you want to do with the attribute).  So, I did the following:

  1. Generated an array of 100-sample random to represent one second of a waveform.
  2. Created 4 waveforms on this 100-sample basis.  The first waveform (channel 0) is just these 100 points.  The second, 1 channel, is the concatenation of string 0 with the base of 100 samples, or a waveform "double".  Channel 2 is 1 string concatenated with the base, and channel 3 is 2 string concatenated with the base.
  3. In order to trace the four channels that they rest 'on' the other, the waveform has the number of the channel added to it.  Channel 3 is 3 + (4 copies of the basis of 100 points), a waveform 400-point random centered around a shift of 3.
  4. All channels have dt value 0.01 (but I guess I could have varied, as well).
  5. To make the channels start at different times, I started channel N N seconds before channel 0 (by subtracting the index of the loop, I, T0).
  6. For each channel, I created an attribute called "Chan" equal to "Channel N" (where N = 0, 1, 2 or 3, as the case may be).

  This is the plot that results. Scale X is the absolute time value (no Date) using the 24-hour HH: mmS format.  You can see that the plots are 1, 2, 3 and 4 seconds of time, and are offset from each other by a second.  I used the trace attributes to change the name to the respective attribute.

  

  The code to do this is very simple - I almost don't need to show it, because I think it is completely described by the text above, but this is here:

  

  Now, it was not that much faster that some of your previous posts, when you refused to your postcode, "guess us" what you wanted (but not to not correctly guess), you tried to "push" us in the right direction (still refuses to post code), and no one seemed very happy?

  Bob Schor

• When and how does the 40 M Reset counter free running?

  Hello friends of LabView,

  I use a cRio 9002 controller RT with a chassis of FPGA 9101 and programming for the target FPGA VI.

  Now, I would like to know the following:

  -What format is the free tick counter 40 MHz running? What maximum ist possible to count?

  -What happens if the maximum number is reached? It resets? How long does take?

  -Or it just starts beginning with 0 without any time to reset?

  Thank you

  Marco

  Hello Marco,.

  using the screws of synchronization for FPGA, you can set the size of the counter internal 8-bit, 16-bit or 32-bit. This size value also sets the maximum possible number, which is the maximum value that can be represented by this record.

  There is no setting for this internal counter and he needs no extra time, as noted in LV for 'Number of cycles' help: a free course counter rolls when the counter reaches the maximum value of the internal meter size specified in the configuration dialog box.

  I hope that answers your question.

  Best regards

  Blase

• How to set the output meter channel to generate a signal pulse using DAQ6008

  Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

  If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

  Lynn

• What is READ the array returned by the DAQmx meter? How can I know the two functions DAQmx READ data stream in the same WHILE loop?

  I have a question about the order of execution.  In the WHILE loop, I have two things to measure, period and tension using the DAQmx READ functions for voltage and the meter.  In the end, I want to collect these data as points almost simultaneously as possible, as a pair and then send them together to another piece of code (not shown here) which them will result in some sort of command for an engine.  It would be run, and then I want to perceive the tension and the period at a time later and do the same thing.

  (1.) I'm a little confused on what the meter of the READ function is back because it's a table.  What is a picture of?  I thought that it was up to the value of the individual periods between rising edges.  The output of the counter 1 DBL d's a table. How many elements in this table, and what determines the size of this table?  Are the elements of the array the individual delays between the edges?  How many values are stored in the array by executing?   We take the AVERAGE of the last 15 items, but do not know if we are throwing some of the data or what.  How to understand the composition of this painting?  How can I change the composition of this painting?  Is it possible to measure only one period at a time, for example the time between TWO edges?

  2.) Will this WHILE loop execute as it gathers tension and a "period table ' (remains to be understood by me) by TIME running in a loop?  In particular, we want that the value of the tension associated with the value of the AVERAGE of the period "array", so we can use two data items to create orders of next control every time that the two values are reported.  The structure for the delivery of vi will be attached data in pairs like this?  I understand that one of the READING functions run not before the other function of READING in the WHILE loop.  I want that the period "means" and "strain (Volt) collected at the same pace. This vi will he?

  Thank you

  Dave

  Hi David,

  I suggest including the DAQmx Start Task function. If it does not start before the loop, it starts the loop and work very well, but it is not as fast and efficient. In the model of task status, task wiill go to run the checked each iteration of the loop and then back the time checked running when it restarts.

  The status of the task model: http://zone.ni.com/reference/en-XX/help/370466V-01/mxcncpts/taskstatemodel/

  Kind regards

  Jason D

  Technical sales engineer

  National Instruments

• How can I change the data format of the digital display of the digital meter?

  I created a screen that uses digital counters to display data.  Each meter has its visible digital display so that the user can see the level accurately.  I have changed the format of the data from the meter to 2 digits of precision and want to display to have the same format, but there seems to be no way to do it.  The digital display is locked to 6 significant figures, which will be confusing for my users.  I know that this was possible in previous versions of LabVIEW, but was somehow lost to 8.6.1 and 2009.

  I am aware that I could do some "work-arounds" with channels or replacing the digital screens with digital indicators, but it is not acceptable.  How can I change the properties of digital signage?

  Hi AEI_JR,

  on the Properties dialog box, when you set the display format of the counter, you will find a switch to choose between 'Digital' (the default) and "digital display"...

• How to take the count (*) corresponding to each table in a schema

  Hi all
  
  could someone please tell me, how can I take the count (*) for all the tables in a schema with the name of the corresponding table.
  I want to choose the table table_name from user_tables and number of rows in the table.
  
  Thank you
  Afonso

  Try the following script which should run as the owner of the schema:

  SET SERVEROUTPUT ON
  DECLARE
    t VARCHAR2(30);
    stmt varchar2(100);
    cnt number;
  BEGIN
    FOR t IN
    (SELECT table_name FROM user_tables)
    LOOP
      stmt :='select count(*) from ' || t.table_name;
     execute immediate stmt into cnt ;
     dbms_output.put_line(t.table_name || ': ' || cnt || ' rows');
     commit;
    END LOOP;
  END;
  /
  show errors
  

• How to reset the counter of DAQ

  I have a system such as X coordinates and Y and in moving my counter will increase, but when the system arrives in the precise coordinates, it must reset the counter (equal zero) that this will be the zero point.
  Attached is a picture to show how I read form pulse DAQ.

  Hi LVelozo,

  you really need to know how to use the shift registers.

  

• Keeping the count of how many times a case structure has been entered.

  I have a "Case" structure (when a button is pressed, it's "True case").

  I want to keep track of how many times the 'real deal' was seized.

  How can I do this?

  For this you need to have a shift register or a feedback node and take into account each time that the case of the case of structure runs the count will be increased to see the attached excerpt.

  

  Good luck

• How to configure CPU Meter so that it displays the image instead of the text version.

  How to configure CPU Meter so that it displays the image instead of the text version.

  Hi John,.

  Welcome to the Microsoft community.

  The CPU Meter gadget shows the status of the two main resources, you can follow on your computer - the use of your CPU and memory.

  To install the CPU Meter gadget in Windows 7, just right click anywhere on your desktop and click on Gadgets. Search the CPU Meter gadget and drag it to your desktop.

  See the Microsoft Article below and check if this is useful:

  http://Windows.Microsoft.com/en-us/Windows7/customize-desktop-gadgets

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Tutorial how to set the view meta tag

  In the tutorial "How to make a website", part 7 down under 'Set the tag meta to point of view. "

  I see how to click on "Viewpoint" in the Insert panel, but what do I do next? I don't see all the instructions for what to do next.

  And, Yes, I will make this comment at the end of the tutorial.

  Once you choose Insert > HTML > Viewport, you're basically done.

  You should see appear in thesection of your page. It's the Meta Viewport, you need to make your site is displayed correctly in the phones.

• How to insert a meta tag in the head element in the topic htm files?

  (I use RoboHelp 9, but also tried to RoboHelp 11 with exactly the same results).

  Our application requires the WebBrowser control to run in IE9 compatibility mode. This means that when launching Help (chm), the Help Viewer will also use IE9 compatibility mode, as it runs in the same process. As Chm files are intended to be read in IE7 compatibility mode, this causes issues with the layout of the help topic.  We found that, to solve this problem, each topic needs the following meta tag in the head element:

  < meta http-equiv = "X-UA-Compatible" content = "IE = EmulateIE7" / >

  Our help system consists of thousands of files htm/subject, of course, we can not do it manually. In order to have it inserted automatically, so I need to edit the parent file that generates the theme files. I tried to find this file, but no luck. Does anyone know how to do this?

  Willam are not available right now, but I can offer another method. Find a tag that may be in all your subjects and use it as a find.

  Replace with your label followed

  First backup.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How can I count the appearance of the paragraph style "H1" used in an .indd document?

  How can I count the appearance of the paragraph style "H1" used in an .indd document?

  OS: 10.8

  CS6

  extend the script

  Hello

  must be sth. like...

  pStyleNameToFind = 'Grundtext';;//Your pStylename here
  
  app.findTextPreferences  = app.changeTextPreferences = NothingEnum.NOTHING;
  
  app.findTextPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyles.itemByName(pStyleNameToFind)
  
  var pHits = app.activeDocument.stories.everyItem().paragraphs.everyItem().findText();
  
  var counter = 0;
  for(var i = 0; i < pHits.length; i++)
  {
      if(pHits[i].length != 0) counter = counter +1
      }
  
  app.findTextPreferences  = app.changeTextPreferences = NothingEnum.NOTHING;
  
  alert(counter +  ' of ' + pHits.length + ' paragraphs in active Document are formatted with paragrahstyle ' + pStyleNameToFind)