My dv6 - 3013cl starts when the battery is in

Similar Questions

• L50 - B satellite will not start when the battery is completely discharged

  Hello

  My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
  I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

  The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

  My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

  Thanks for responding... I hope well :-)

  Toshiba L50 - B
  Windows 8.1
  Any standard/original setting since I only acquired this laptop a month ago.

  The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

  Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
  Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

  So in the worst case, the laptop must be checked by authorized service provider.

• Satellite M50D-A-10W does not start after the battery is completely empty

  I have a laptop Toshiba Satellite laptop Satellite M50d-A-10W AMD A, 15.6.

  I have problem when the battery is completely empty I have to use the needle achieve hard reset the switch behind the laptop... so I can't enter in bootmode with f2

  How can I solve the problem?

  Thank you

  I guess you are talking about the shutdown procedure force as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  This problem can appear in case the PC freezes, do not start or has a power failure.

  I think that the laptop turns off in case the battery is completely empty. In this case the system does not close properly.
  As the default state, the system keeps laptop but usually the unit carries out a stop of the hybrid. This procedure allows the laptop to start much more quickly, but it could affect the system startup in case something goes wrong during the process of closing.
  You can disable this hybrid mode and in my opinion, it is also recommended.

  Details:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  However, to avoid these problems, it of very important to correctly perform the closing procedure.

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• Beep is annoying when the battery is at 10% Y650

  It listed essentially the same question in the thread Y550 (http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Y550P-Low-Battery-Beep/m-p/200159#M18937)

  After reaching the remaining 10%, the battery starts beeping each about 10 seconds until you plug in an AC adapter.

  A BIOS version to stop the beep would be appreciated. As my laptop starts beeping when I'm in class and which is not good.

  Thank you

  Bryant

  Hi all

  I'm sorry for the late reply. I was not around when the new biox was released last week.

  Anyway, you will find the links here for download.

  32-bit Win XP, Win Vista, Win 7 - 15CN35WW (V2.08_x32) .exe

  64-bit win Vista, Win 7 - 15CN35WW (V2.08_x64) .exe

  Your trouble of having to beep when the battery is low should be fixed now. =)

  Thank you for your patience.

  Kind regards

  Cleo

• Use of AC when the battery is at 100%? (S7-391)

  Hello world!

  I have been affected by the worst support from Acer, I have no problem with the ultrabook himself (Acer Aspire S7-391) but I have some doubts about pilots and other things, that they have avoided answering many ways. So, here's the thing:

  This ultrabook has all drivers that could be use the AC power when the battery charge reaches 100% to avoid tampering with the battery?

  The thing is that while I have 100% of the battery and the ultrabook is connected to the power adapter, it always seems to be draining the battery power and recharging it back to being 100% all the time.

  When I ask about the drivers, who might or might not be installed, I just need to find a way to access this functionality if possible, and if I can't, I need to know as soon as POSSIBLE so that I can start unplug the laptop right after that the battery has reached 100%.

  Thanks in advance.

  As you said with Connector 2 power pins can also disconnect the battery charge. It can disconnect the power supply from the battery charging circuit when the battery reaches a particular % with the laptop running load in power cables. I do not think that your computers support portable setting the level of charge of battery to a % custom. Your laptop must have a particular hardware and BIOS that supports. In some laptops, the BIOS has the ability to define a particular % of battery charge. I read somewhere that windows 8 do not support this feature, old version of windows (Vista) support this feature.

  Some write up I found online to help you.

  Memory effect

  First of all, it is necessary to unfold a myth that persists in the minds of many people.

  The effect of stack memory.

  In the basis of lithium batteries, it is in fact a myth, it applies only to the old nickel-based batteries. Therefore fully discharge and recharge the battery are completely useless and even harmful as discussed below.

  The modern lithium battery can be charged independently of its current percentage, because he has absolutely no negative effect in his performances.

  Should I remove the battery when the a/c is connected?

  Many users of portable computers have this question and we will answer it right now:

  The answer is: YES and NO, it depends on the situation.

  Have a fully charged battery and the laptop is connected is not harmful, because as soon as the load level of 100% of the battery stops receiving the energy load and this energy is shorted directly on the power of the laptop system.

  However, there is a downside to keep the battery in the holder when the laptop is plugged in, but only if he currently suffers from excessive warming caused by the hardware of the laptop.

  So:

  -In normal use, if the laptop does not get too hot (CPU and hard drive around 40 ° c to 50 ° c) the battery must remain into the Jack of the laptop;

  -Intensive use, which leads to a large amount of heat produced (i.e. games, temperatures over 60 ° c) the battery should be removed the socket in order to avoid unwanted heating.

  The heat between the fact that he has 100% load, is the great enemy of the lithium battery and not the plug, as many might think so.

  Battery discharging

  Full battery discharges (until the computer laptop power shutdown, 0%) should be avoided, because he insists a lot on the battery and may even damage it. It is recommended to perform partial discharge to levels of capacity of 20 ~ 30% and frequent accusations, instead of performing a complete discharge followed for a full charge.

  Laptop PC battery contain a gauge of capacity that allows us to know the exact amount of stored energy. However, due to the charge/discharge cycles, this sensor tends to be inaccurate overtime.

  Some laptops include in their BIOS, tools to recalibrate the battery meter, which is nothing else than a full discharge followed by a charge complete.

  So to calibrate the gauge, it is desirable, in all cycles 30 discharge, a full uninterrupted discharge, followed by a too, non-stop, full charge.

  An inaccurate gauge may have to the fact that the capacity of the battery are values are false. The battery can report that he still has 10% of capacity, when in fact it has a much lower value, and this causes the computer to the unexpected shutdown.

  Cycles of discharge (or charge) are to use this charge battery (100%), but not necessarily all at once.

  For example, you can use the laptop for a few minutes in a day, using half of its e ability then it load completely. If you did the same thing the next day, it can be considered a discharge cycle, not two, so it may take several days before finishing a complete discharge cycle.

• I want to make my laptop plugged in, but do not load when the battery reaches 95%. How can I do?

  H !!!

  I want some help to train you...

  There are growing problem in many portable of peoples that their laptop shows connected but does not support...

  But it's not my problem.

  My problem is just the opposite of it.

  I want to make my laptop plugged in but not in charge when the battery reaches 95% how can that I do?

  Hoping answers from you...........................................................................................................

  Original title: Performance and tools

  JNMilan,

  It is not possible. You must use a third-party software to do or contact the manufacturer.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Back to us for any problem related to Windows in the future.

• My computer is no longer warn me entry stop when the battery reaches the critical level.

  My computer is no longer warn me entry stop when the battery reaches the critical level. Officially, it shows a warning sign and told me to shot or recharge the battery when it gets to level criticism, but now he can't, but stop just when the battery has reached its critical level. No warning sign more.
  What should I do to get the warning before the pc turns off when the battery is at its critical level.
  My pc is hp laptop mini 110-3100. Start Windows 7.

  Hi Sage180,

  ·         Did you change in the computer before the show?

  Follow these methods.

  Method 1: Run the Troubleshooter of power.

  Method 2: Follow the steps in the article.

  Solutions to common battery problems

  Battery meter: frequently asked questions

  For reference: take care of your laptop battery

• How to control automatic shutdown when the battery is discharged using Windows

  The laptop stops right in the Middle something without notice.

  Even after that I formatted the system, he still stops automatically when the battery is low, without advising me of either the low battery status or the judgment.

  I don't think that the cause of the problem is the power management because it is set to balanced.

  How can I control when the pc stops?

  Hello

  Usually, you can change these settings within the Windows power management.
  Using Win 7 or Win 8/8.1?

  Here is the Nice technical document about the features of Windows 7 power management
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Check the last option called: battery.
  It provides many useful features such as low battery, critical battery level, low battery action or critical battery action

• Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

  Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

  This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

  Help!

  The laptop is a year old.

  I already ran the diagonsitic battery and it said the battery was good.

  OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

  Here are the parameters:

  reserve battery level (this is when the popup will appear).

  10%

  low battery (this is when the low battery action will be performed).

  8%

  critical battery level (my computer would die at this point.)

  7%

  low battery action: sleep, sleep (this customize to your liking).

  battery low notification: on (hold on).

  critical battery action: sleep, sleep (my computer died already in criticism.)

• When the battery drops below 50% the Satellite P200 turns off

  The laptop turns off when the battery is less than 50%.
  Do I have to get a new battery or what?

  Hello

  I guess you have preinstalled Vista.
  Have you checked your vista power management configuration?

  There you can assign some settings that would control the laptop turned off depending on the State of the battery.

  I think you need to set it to a lower level for example 5%

• Satellite U300 turns off when the battery has been removed

  Hello

  I'm on the laptop with the battery in place, and the power supply plugged in.
  That's when I take off the battery (always plugged power) who, after 5 seconds the laptop powers off.

  It's not happened before and now it happens ALL the time every time I have to remove the battery.
  I noticed that when the battery is removed, the battery light is always on – if for some reason any cell phone still thinks the battery is connected.

  For me, it looks like an electronic power supply problem.

  But it s just my personal opinion

  I think that the laptop should be checked by an authorized technician.

  Contact the ASP in your country and ask for verification

  If the warranty is valid then an everything should be done for free

  Good bye

• Re: Satellite U300 hibernates when the battery is very low

  Hello

  I bought my satellite U300 141 two weeks ago.
  The computer is not put into hibernation when the battery is very low.

  I checked the settings of vista, default 2% of the battery capacity, the laptop must Hibernate. But mine is not.
  But I noticed that the battery level does not fall below 5%. I tried to change the setting of vista from 2% to 5%, but it has no effect.

  Telephone toshiba support told me to update the package of the value 'stretched out' or something like that, but it has no impact too.
  the problem is still there.

  Anyone have an answer?
  I also tried to update the BIOS, but during the upgrade process, the software told me that I can't because I'm not the administrator of the computer, I am sure I am.

  so, if someone can help me please...

  Please check first if hibernation was enabled in Vista power options.
  Then you can assign to hibernation level up to 10%

  Maybe then your laptop will be able to enter hibernation mode

• Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

  Hello

  Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

  I have a Toshiba Satellite Pro L670.

  Even when the sound in Windows is turned off the laptop do a annoying sound.

  Thank you!

  Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

  Do you really want to work until the battery is completely discharged?

  Anyway, AFAIK this notification level BIOS cannot be disabled.
  Let's see if someone else is better informed than me.

• Laptop will not start without the battery attached

  Hello

  I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.

  If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.

  Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.

  So my question is: what is a motherboard or a problem with the AC adapter?

  The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.

  Thanks in advance.

  Hello

  Visit this link

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=61317&tmp_task=solveCategory&CC=US&DLC=en&lang=en&LC=en&Product=5081068&Query=dv7-6052ea&Tool=

  Good Luk