Similar Questions

• Monitor turned horizontal and I want it to be vertical, as if it was originally. How can I reset the settings of my monitor so that the monitor is vertical again?

  I reset the computer and the horizontal layout remains.

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right click on the empty desk > graphics > Rotation.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I configure the system to a previous date

  I have windows vista and cannot find how to restore the system to a previous date

  Hello

  Here's how to do a system restore:

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and if you have problems doing, read this:

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How can I reset the settings in Windows Explorer?

  In Windows Explorer, I found a strange behaviour. Double click on a folder in the right pane, under "Name" opens a new window, but it is the search engine. To change this, I clicked Tools - Folder Options - File Types and found 2 symbols of file with Extensions (NONE). Called him "File Folder", the other was called "folder". Looking for their settings by clicking Advanced, I found 'find' to the file and 'explorer' and 'open' sub-folder.

  I edited the file file Type by adding 'Explorer' and 'open' and put ' exploration ' by default which is in bold it.

  The first syptom disappeared and no window of 'research' more open unexpectedly, but the new window opens in a new window instead of the same window. It made no difference by changing the setting in Tools - Folder Options - general - browse folders: open each folder in the same window/open each folder in a window own tis.

  Also, I couldn't explore to memorize the settings of my privileged point of view: details. It is always default to tiles.

  Hello

  Have you tried to Folder Options > view > reset records? It is the button in the top right.

  You can change these views by changing the settings of view Windows Explorer.

  Click on view and then add the status bar and change the display option for the icons (I like to use the details).

  But sometimes these settings will return to default. Even if you click on apply to all folders, settings may return by default.

  One thing you can try is to set your favorite view, then instead of closing the window using the X in the upper right corner, close it via the file menu. This is known to keep the settings in place for some time.

  Another solution to the problem is to reset the point of view of folder.

  To do the following:

  1. start the registry (Regedit.exe) editor.

  2. look for the following key in the registry:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\ShellNoRoam\BagMRU

  and

  HKEY_CURRENT_USER\Software\Microsoft\Windows\ShellNoRoam\Bags

  3. make sure that you back up the key by exporting them to a .reg file.

  4 remove the keys. You've just turned XP out-of-the-box settings.

  5. close the registry editor.

  6. restart your computer.

  7 customize your folder view.

  8. now the new views of folder must remain in place.

• Does anyone know why when I try to buy the plan CC, I get a message saying that I can't buy because it is not available in my area (Mauritius) - however I am not in Mauritius... I used to be a long time ago... How do I reset the settings in my area so I c

  IM is more alive in Mauritius, but when I try to upgrade my free trial status (I have download in Mauritius) I said that it is not available in this region. I am now installed elsewhere, but for some reason that it is not recognized. Can someone help with the settings?

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -html http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id.

• How can I reset optimize for quick removal on USB that I don't see any more?

  I installed a Drobo on my Vista 64 SP1 and became only on transer 12 MB/s on USB 2.0 speeds.  I went into policies and changed the setting on the drive to optimize Performance.  Come find out who is a no no with a Drobo.  Is no longer, I can start or stop the computer with the Drobo connected via USB.  If I connect it runs that the drive is not recognized in Device Manager or any where.  The only change before and after, it's changing the Optimize setting.  Yes, is there a reg edit I can do to get the back of the car, or all USB drives, to optimize for a quick deletion since I can't access the drive at all now?  Any other ideas?

  Also, I tried to do a system restore, but for some reason any Vista shows only a restore point of yesterday and today.  He has no points for any time before that.

  Thank you

  Ted

  Oops... Press the wrong button

  (1) go into your registry with regedit... the registry entry for your drobo will remain even when you are offline.

  Navigate to HKEY_LOCAL_MACHINE\SYSTEM

  now searching: UserRemovalPolicy

  make sure that 'look' VALUES is verified

  keep hitting "Next" until it looks like you're in the tree of your drobo (have not installed on this PC so I can't find the exact key for you)

  The value is probably '2 '... Change it to 3 (no matter if hexadecimal or decimal).

  reset.

  connect drobo when you get back into windows.

  .. Lister other possibilities:

  (2) would work... connect a USB 1 or 1.1 hub to PC and connect drobo to hub...

  (3) go in the BIOS of the PC and USB set 1 or 1.1... might work... maybe not...

  ~ kev

• How to make a restart of disk with the files and data, that is to say, to the profession of XP

  I looked at my hard drive and have little or nothing left to free space, and I d ' attribute of * on my pc, I have removed more than half of it I do not either, but the hard drive still does not seem to move with more free space. so I was wondering if someone can tell me how to make a backup of drive for windows and programs, but not all the other files that I have on my hard drive, I would put the disc that came with the pc, but I left it out and the dog he finished, numbers and all, I can reinstall everything I need later ,,

  It is not a method of "reset" of windows, se...

  also, there are 'boot' cd that can be made, but they cannot be used to start windows.

  what they do is to start the computer with their own proprietary software, being generally utility to repair the file system.

  Subsequently, it is the hope that xp can then start by itself.

  don't know exactly what your situation is.   However, it seems that it would be a good idea to mount this hard drive as a slave / secondary drive on a working computer.   all computers can have at least 2 hard drives installed at the same time.

  in any case, if this drive can be enslaved on a working computer, you can use this computer to reconcile the master file table, i.e. to check the disk, then it - defrag since you had deleted half of the records of the file system.

  by the way, if your pc is not stable, how would you be able to make a bootable cd?

• I want to do a "System Restore" at an earlier date than when I did a "System Restore Point"; How can I realize this "System Restore" to a date that is earlier than the "System Restore Point"?

  I am running a version of Microsoft "Vista." I want to do a "System Restore" to a date earlier than the 'Restore Point System' which is steeped in external memory of my terminal (and apparently in memory of boarding school of the terminal).  The terminal shows only the "System Restore Point" that I had introduced manually; How replace this erroneous 'system Resote Date Point' so that I can get rid of things that I wish were not included in the drive of my terminal?  Specifically, the "Ready Boost" option has ruined my terminal memory drive; That's why I want to get rid of with a "restoration of memory", but there is no other precedents "System Restore" options.

  Hello

  You will be able to perform a system restore to a restore point created or present on the system. If you have no restore point created before the questions, then you will not be able to restore it.

  For more information, see the following articles:

  System restore

  System Restore: frequently asked questions

  If you try to uninstall an application, you can read the following article to uninstall the program.

  You can see the following link to uninstall the screensaver.

  Uninstall a program

  You can also try disabling readyboost and check if it helps.

  Turn ReadyBoost on or off for a storage device

• How can I reset? search for Chrome settings (and other applications)?

  Hello

  In Chrome, my search parameters are all disorder, I don't see the usual Favorites list on the left and some files are missing from the view.

  I also have this problem in other applications. After all, there are no settings or personalization framework Chrome for customization of view viewfinder (Save dialog).

  How can I reset the finder for some applications, so that I get a similar opinion when I opened a new folder?

  Thanks for any help,

  Joe

  Try to restart in Mode safe mode, and then restart normally.

  OS X El Capitan: start in safe mode

• all my photos are smaller, how can I reset it, thank you

  All my photos are much smaller now, how can I reset my settings to get the size again, thanks

  Depends on the details not disclosed

  Are the reduced size of the views or decrease the pixel dimensions?  To change the display size move the cursor in the upper left corner of the display of Photos

  LN

• How can I add a field to a previously mapped chart

  I have a chart that traced.  I'm collecting a new path and I want the chart to show how the new plot is followed closely the previous (data are currently made by a sensor on a fixed period).  I want that to happen in real time.  Is this possible?

  Thank you very much

  Graphics do not maintain a history, so when you draw something to a chart, you draw it costs.  Any information that was already in the graph is replaced.

  What you need to do is to store the information that you are already mapped to the graph in a shift register.  Now when you want to add new data, you add that to the data in the shift register and send it back to the chart.

• How to reset my settings on my iPhone?

  Everywhere I have seem to look only shows me how to clear

  content and settings. Is it possible to do just the settings? And how to do it

  Try this.

  Settings > general > reset > reset all settings

• How can I reset my MacBook Pro using El Capitan 10.11.4 to factory settings?

  How can I reset my MacBook Pro using El Capitan 10.11.4 to factory settings?

  Factory settings? As in totally blank? What to do before you sell or give away your Mac - Apple Support

  If you keep the Mac, just look at step 6.

• How can I get my access code for reset all settings

  This HTML class. Value, this is how I can get my passcodefor reset all settings

  Salvation is Sha R,.

  If you ask what to do if you forgot your password for your iPhone, take a look at the user manual in the resources below:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled

  Take care

• How to completely reset my iPad 2 to factory settings

  How to completely reset my iPad 2 to factory settings? I just got a new iPad 2 Air and want to give my old my friend, but to clean completely first. Thanks for your help.

  See if that helps

  https://support.Apple.com/en-us/HT201351