R8500 p/n power adapter

Similar Questions

• r8500 Power adapter needs to be replaced

  Hi guys,.

  Unfortunately, my puppy has decided to go into my computer room and causing havoc with power cords (didn't hurt fortunately but it has decided to start chewing on large parts of the adapters, only good side of things, it's that he didn't have a wee on it!)

  Anyway, I can't find a power adapter replacement online for this specific router. Is there any place I could find an or can support netgear help me buy another (I can't be the only person who needs a replacement power adapter). I don't want to get the bad either and short-circuit this unit.

  So if there is someone who knows where to find one, or could help me to find the right person to netgear to connect with I would really appreciate it!

  @ifixidevices Like E - Bay is a not authorized reseller, consider buying a new power adapter.

  The part number is 332 - 10631-01.

• Check whether or not the magsafe power adapter is authentic

  Hello! I bought some 60 W MagSafe 2 Power adapter MD565CH/A, 85 W MagSafe 2 Power adapter MD506CH/A & 45 W MagSafe 2 Power adapter MD592CH/A but the serial number in each category is same for example there are 10 units for 60 W & all have the same serial number. I have a doubt, be they authentic shape Apple or not. Kindly help.

  You will need to call Apple for confirmation.

• A Magsafe 85w power adapter would be detrimental to my MacBook Pro (13-inch, mid 2010)

  Hi all!

  I have a MacBook Pro (13-inch, mid 2010, 2.66 GHz Intel Core 2 Duo).

  Well, after years of abuse, the thinner rope (which connects to the Macbook) began to tear. I tried to drag an above shrink wrap to fix and make it last a little longer, but now I find myself stirring the rope around so he can start loading.

  in any case, I found a company after-market on Amazon called Supsun making (link below) and recently purchased a. He said that going to work with my Macbook, but I think not even check what power mine use and after he woke up, I found out mine originally a 60w.

  Will this hurt Magsafe Supsun 85w power adapter my mid 2010 13-inch Macbook in anyway?

  I thank you for all your comments!

  Link to Supsun adapter that I bought on Amazon:

  F8 & PSC = 1 https://www.Amazon.com/GP/product/B01IP3YNA6/ref=oh_aui_detailpage_o00_s00?IE=UT

  I, personally, look at the price difference and ask myself I'd be sad if I saved money and things did not work well.

  Review, carefully, then users of the product review.

• Does someone have a MagSafe 2 power adapter whose serial number is located inside the space where the two pins?

  Hi guys!

  I want to know if the power adapter of MagSafe2 that I just bought is genuine or counterfeit.

  I bought a MagSafe2 power adapter that has its serial number located inside the space where the two pins. Its model # is A1424. All the power MagSafe adapters I've seen always have serial number located under the round metal head big (I guess it's called head male or female?). Please see photo for reference.

  If any of you have or had any Apple Store, can you let me know?

  Thank you!

  

  My 85 Magsafe is exactly identical to your image.   It was 'inside the box' with a new MBP computer.

• Power adapter can be used for a Satellite Pro M70

  power adapter can be used for a laptop Toshiba DC?

  Details:
  19V, 3, 42

  Thank you
  Arun

  Laptop Toshiba computers use a 19 V or 15 V adapter.
  You must first check the specifications of your laptop before connecting an AC adapter.
  But I would always use AC adapter provided with the laptop or an original part recommended by Toshiba

• PC Toshiba laptop 1110-Z14 - power adapter *.

  Hello

  I am from the United Kingdom (Europe). I have Toshiba satellite 1110-z14 laptop and I need a power adapter for it. Is someone can you please tell me what model number of PSU do I need?

  appriciate any help.

  Hello!

  My Satellite 1110-Z14 a sequel AC adapter / CC:

  PA3097E - adapter universal 100-240V AC, 50-60 Hz, 60W with 19V DC output.

  Good day!

• NVIDIA Quadro: I plug 6-pin power adapter or connector 8 pin?

  I am trying to install my graphics card Nvidia Quadro 6000 on a HP Z820 with a PSU 1125W

  The Quadro card: 1x8pin auxiliary power connector and power connector auxiliary 1x6pin.

  My questions are

  1. in the connection of my power adapter, do I plug the unit into the 8 pin or 6 PIN auxiliary connector?

  2. where can I connect the other end of the power adapter?

  3. the power adapter must be a HP one or can I use any brand.

  4, if it's HP, what is the part number

  I would appreciate help on this.

  Vinny

  Edit: Here is this link related to this issue.  It goes also to other topics with excellent similar information:

  http://www.TomsHardware.com/reviews/power-supply-specifications-ATX-reference, 3061 - 12.html

  First, it is important to know that there is another interface "6 to 8 pins" which is a feature of power-for - motherboard power ... you don't want that, sure, and connectors plastic is having different shapes.  You can see that he has 4 yellow wires (usually the supply wires) and would not have the sequence of correct wiring of a PCIe 6 to 8 pins supplementary power converter:

  

  I don't know the show, too, is not what you want.  This looks like an 8 pin to two adapter 6 pins.  You want a 6-pin to 8 pin adapter.  Is attached another picture of the nVidia type tells you to do.  If you look at the hyperlink at the top of this post you will find the wiring of 6 pins on 8 wire and for your project, you will probably want to follow the advice of nVidia for best results.  There is power to the ground and 'sense' son to all be correctly connected to the adapter.

  There is also some PCIe additional adapters that allow you to convert several sheets supply 4 son "molex" grouping in a single 6-pin PCIe or connector 8.  It is best to not do this if you have a power with official ones built in.  Your the fact, and to check the manual, it looks like your top rated power supply has 3 of these auxiliary PCIe power cords (G1, G2 and G3 will be printed on the side of the end of your 3 card).  On the other hand, offer reduced rated power of the Z820 has only 2 additional PCIe (auxiliary) cords supplied by it.

  I don't know if you are forced to use a good 6-8 converter or could if away with plug 6 pin right in the correct position on the plug 8 pins of your videocard directly, according to article of the hyperlink.  I, personally, would get an adapter.

  EDIT: Here is a picture of two ends of what is supposed to be a PCIe 6-pin supplementary power adapter PCIe 8 pins.  The first and third power pins 6 pins are officially DC 12v (some references have each of the first 3 pins being 12vDC) and subsequently, the rest are supposed to be a 'sense' or earthed.  When I look at the plug 8-pole end wiring I do not see a ground wire or ground jumper coming to pin 8.  I would not recommend it, unless I'm wrong about his son:

  

• iPad Pro 9.7 "USB - wattage power adapter?

  I'm surprised that the iPad Pro 9.7 "that I just upgraded to a (1st gen) iPad Air only has a 10W compared to Air 12W power adapter.

  All confirm that their unit has the same card please?

  I can't confirm it directly since I don't own one, but for what it's worth, one a few days ago I saw a similar post on CSA the asking on the charger 10W on their Pro 9.7. And this could confirm:

  http://forums.MacRumors.com/threads/iPad-Pro-9-7-charger.1965066/

• PROTECTED Z930 Power adapter, flashing

  The power adapter light flashes in orange and I can't turn on my laptop. It seems to blink 7 times and then 1 time before a long pause. Any ideas on how to get the laptop on again?

  Your laptop has a hardware failure, and it sends the hex code. This code can be read by technicians and they will know what is the problem.
  I can't say for sure, but I guess that there must be a problem with electronic control gear.

  The warranty is still valid?

• Re: Tecra A11 - 11Z goes on with power adapter only

  Hello

  My Nooteboom only lights up when I connect the power adapter, 30 seconds to turn off, do not see anything on the screen! Tahnk you

  To be honest I did not understand very well your ad.
  Can you please tell us what exactly happens when you press the power button / stop?

  What was your last action before you noticed this problem?
  Have you updated BIOS or maye some hardware component?

• Satellite C870 - 11G - AC power adapter compatibility question

  I have a C870 - 11G.

  It uses power adapter part no PA3917U-1ACA, who recently became damaged when someone tripping over the cable and it bends the end that connects to the laptop.

  I used to have a Toshiba C660D-10W a few years ago and the power for this laptop adapter you still, even part no PA3714E-1AC3,.

  Does anyone know if this is compatible with my C870?
  It seems to fit but I wanted to try it incase it damage the battery or something.

  Any advice will be greatly appreciated.

  On the first picture you can see the values:
  * 19V * (v) * 3.42A* (Ampere)
  On the second picture, you can find the same values.

  If two adapters providing the same volt Ampere and should be compatible.

• Satellite Pro C660-16F: power adapter that is compatible

  Hi all

  I recently lost the charger of my Toshiba Satellite Pro C660-16F.

  It provides the output DC 19V - 3, 42A

  My father also has a Toshiba Satellite, model A300 1RF

  Supplies of its DC 19V - 4, 74A Chargers

  I don't know if I can use the charger of my father for my computer, like I don't know
  If it is just the current or excessive current it can cause damage.

  Can someone give me the answer to that?, thank you very much in advance!

  Hello

  You can use another adapter 19V.
  The value of the Volt is very important. You can ONLY use the power adapter that supports the 19V
  The ampere is too important, but it may be a little different.

  Your original adapter supports 3.42 Ampère and other 4.74. It's a little higher but not really relevant.

• Satellite Pro A10 - need a part number for power adapter compatible

  My son has the older Toshiba Satellite Pro A10 Intel Celeron 2.0 GHZ 256 MB 30 GB DVD/CD-RW 14tft monitor.
  His diet no longer works, can someone tell me the power adapter part number that I am looking for a new one for him.
  I need to get a reference number and any number of compatible power cards.
  Appreciate any assistance.
  Thank you
  Jane

  Hi Jane,

  I think the part number you need is PA3283E-2ACA

  Find out on the following link: -.

  http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&Pro duct_uid = 64945 & _LOC = UK

• Cinema poster 30 '' Dead - could this be the power adapter?

  Monitor: Cinema Display 30 ''

  Computer: Connected to a MacBook Pro mid 2012 of the retina with a 2.6 GHz Intel Core i7, 16 GB of RAM.

  Graphics card: NVIDIA GeForce GT 650 M 1024Mo

  I got the screen of cinema since 2007. Used with a tower for the first five years, replaced the tower with a MacBook Pro in 2012. The CD went with the laptop using a bolt of lightning > DVI adapter for about 3.5 years, worked ok. Finally, the Cinema Display monitor everything went black. The LED in the corner is always on when powered. I can still use the power on the CD button to turn the monitor on/off, standby system etc. the MBP still sees the CD in monitors when the adapter is plugged. The CD can still push USB devices. But there is no picture, no matter what I do.

  Finally carried the old tower outside and connected to it, just to see if it was something with the MBP the CD. Same results, no image.

  I noticed that the power adapter brick remains cold. If it's just that bad, and I could replace it for a relatively low cost? I see the price of $150/200 on Amazon. Don't want to waste his time with that much more, it's a 9 year old monitor. But I really loved and I want to see if I can get pulled upward again.

  Thank you.

  Looks like either the back lit display is on the way out (you can tell if the monitor is nothing display by shine a very bright light until the front screen and see if you notice any displayed video), or the display is not simply detect the output signal of your GeForce card. I have a NVidia GTX 770 and one of my 3 cinema Display is sometimes the same thing. I end up having to unplug the screen for a few seconds, use WIndows to detect the display, plug the monitor back in and detect the display again to get any video to show on screen. It is intermittent but sometimes quite stubborn. Good luck! If you have two monitors, you can use work to see whether or not your cinema is even detected. If it is, but the screen is always black, it is likely, that you will need the spare parts for backlight.