I try to install Service pack 3 on my Windows XP, how do you know if there are other programs running

Similar Questions

• 490 error code when you try to install service pack 2 with vista

  I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

  blztcj,
  Take a look at this article and try the steps inside:
  Troubleshooting Vista Service Pack installation issues

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install service pack 1 on vista. 8007045D error code.

  I try to install service pack 1 on vista but keep receiving an error code the code I received is the code 8007045 D, I tried this and she returned as an error xbox but I am trying to install service pack 1 on my computer not on xbox, I can not install my printer without the service pack of the ideas of helpor please

  How to use the System File Checker tool to troubleshoot missing or corrupted system files...
  http://support.Microsoft.com/kb/929833

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• Error code 800F0811 when you try to install service pack 2 for vista

  Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?

  When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1

  Hello

  Review the information in the site mentioned below that can help you work with the question:

  http://support.microsoft.com/kb/947366#resolution3.

• I get error Code 80070002 when I try to install Service Pack 1.

  Vista will not be updated to the Service Pack 1 or 2

  I have Vista and have windows automatically updates.  Of course, it is never updated with the Service Pack 1 or 2, and when I go to Windows updates, it says I have no updates available.  Recently I had trouble with my anti-virus software, and they said it was because my computer has not been updated.  I didn't know that I was not common.   However, I get error Code 80070002 when I try to install Service Pack 1, so SP2 cannot be downloaded until I get this one.  I tried everything I could find as an aid, but they were especially when people had problems years ago, when it came out.  What can I do?

  Hi kimber222,

  If these steps are not successful, the next step is and InPlace upgrade. This process is an alternative to reinstalling the operating system. During the process, some of your custom Windows settings may be lost.

  Run a repair installation will restore your current install of Windows to the version of the installtion CD/DVD. You will have to reinstall all the updates that are not included on the CD/DVD.

  Although this process should not damage files and the applications installed on your computer, it is always safe to make sure that you have a recent backup of your data and how to reinstall all software you have installed.

  Fill out the next step for the InPlace upgrade:

  1. Close all open applications.
  2. Insert the Windows Vista CD/DVD intot he computers CD/DVD drive.
  3. In the windows installation program, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exein the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yesto accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• Problems with Service Packs - when you try to install Service Pack 2, it says I have to install SP1. When I try to install SP1, it says that I have already.

  My automatic update did not work, so I went to the site to try to download Service Pack 2, one seemed to have trouble with my computer. After I downloaded it, I tried to run, but he said I had to download Service Pack 1. So I did it. When I try to run this file, it says I have already installed Service Pack 1. So I tried to restart the Service Pack 2, but she is always claiming that I need Service Pack 1. I don't know what I'm supposed to do. Can anyone help? I'd be happy.

  Hi mistyrayns

  
  You can check if the below steps help-
  Step 1:
  I suggest you to check if you have information that service pack 1 is present on the computer. You can click Start and run. Then type msinfo32 and press ENTER. Check if Service pack 1 is present in the information provided.

  Step 2:

  If you have service pack 1 installed, and mentioned in the information from the computer, then I suggest you refer to the article below and uninstall service pack 1 computer.

  http://support.Microsoft.com/kb/948537

   

  Step 3:
  After successful uninstallation of SP1, try to install both service pack 1 and 2. Check if the issue is resolved.

  I hope this helps.

• try to install Service Pack 1 for Visual Studio 2010 and I get a Code 13EC

  original title: 13EC error Code

  I am installing Service Pack 1 for Visual Studio 2010 and I get a Code 13EC wrror I don't understand why I get this and how can I reslove it?

  Uninstall .NET Framework 4.0 components, then try the installation again.

  For further assistance, please post in the following forum:
  http://social.msdn.Microsoft.com/forums/en-SG/vssetup/threads

• Server did not respond error when you try to install Service Pack 1 for Windows XP.

  I had to do a restore system with xp home edition. Trying to update from sp1 which has been downloaded to the thumb drive and sent to my office at the top of the page. starts to load, and then tells me that the server did not respond. I am connected

  You do not start with a service pack earlier and go to the top. You only download the latest service pack. The latest service pack for Windows XP Home Edition is Service Pack 3.

  Go to Windows Update and see if you can find it there.

  If this isn't the case, then you can manually download it here:

  http://www.Microsoft.com/download/en/details.aspx?ID=25129

  It is a CD image file that requires you to burn to a CD or use a virtual CD/DVD software like Virtual CloneDrive. This allows you to open the ISO file as if it was a real CD inserted into your DVD drive. All you have to do is double-click the ISO file, once you have installed this program. Run the configuration file.

  http://www.SlySoft.com/en/Virtual-CloneDrive.html

• Why do I get 800736B 3 error code when you try to install service pack 1 through windows update in windows 7 64 bit?

  When windows update tries to install service pack 1, it fails with the error code 800736B 3. I am running Windows 7 professional 64-bit.

  I searched around these forums and others to find a solution and I'm afraid I'll have to re - install windows.

  So far I have tried:

  1. installation of the fix/update - Windows6 analysis tool. 1-KB947821-v10 - x 64

  2. I ran sfc/scannow in the administrator command prompt

  3 run the windows update utility for troubleshooting to solve all the problems

  4 remove all content from the C:\Windows\SoftwareDistribution; When I delete these files it redownloads the update, but on installation, you get about 65% of the way through and fails.

  5 disabled and re-enabled BITS

  6 downloaded the stand-alone manual update, installation failed the part of the way by

  Here is the reading for the Checksur.log

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-03-29 20:20

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI identity missing 0 x 00000000 wnetvsc.inf_31bf3856ad364e35_6.1.7600.16385_b3131d70e92cd346 appid
  (f) CSI identity missing 0 x 00000000 ws3cap.inf_31bf3856ad364e35_6.1.7600.16385_f2bcdebb5e0570d7 appid
  (f) CSI identity missing 0 x 00000000 wstorflt.inf_31bf3856ad364e35_6.1.7600.16385_1c88e04231fe3719 appid

  Summary:
  Seconds executed: 419
  Found 3 errors
  CSI identity lack Total count: 3
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Do a repair of Windows 7 installation and then install SP1.

  Windows 7 - repair facility
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Try to install Service Pack 3 in Windows 7. Let the gettting error: 80070663

  Tips to avoid the error 80070663 for the installation of Service Pack 3 for Windows 7?

  The latest Service Pack available for Windows 7 is Service Pack 1.

  To see if you have Service Pack 1 is installed:

  Click Start, right click on computer

  Click on properties

  Look under Windows Edition

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

• Error 0 x 80070490 tries to install Service Pack 2 32 - bit windows vista

  I tried to install service pack 2 and I have worked as normal until I signed in. when I signed in I received error 0 X 0070490. I don't know what that means. Help?

  Hello

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  _______________________________________________________

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• When I try to install Service pack 2, I get an error "WindowsUpdate_80070570."

  Each update else installed to succeslfully, except for the one that says "Update important" which is be Service pack 2 for x 64 system. I tried to update, and I get this error code "WindowsUpdate_80070570"

  I rebooted my computer, cleared out memory... I would really like to fix this ASAP, I bought a video game that requires I have SP2 installed, please someone help me fix this :(

  Thanks in advance :)

  hobodealer,
  Please post with the information requested here: what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Run the System Update tool and then try to install SP2.
  Run System File Checker and test it.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 8024200d when you try to install service pack 2 on vista 32-bit

  SP2 and run system update tool update always fails.

  Hello

  **********************************************
  Rename the folder Catroot2 rename the Catroot2 folder (Windows XP and Windows Server 2003 only) and then try to install the program again.

  Note Skip this method if the operating system is Windows 2000.

  To rename the Catroot2 folder, follow these steps:

  1. Click Start , click run , type cmd, and then click OK .
  2. At the command prompt, type the following commands and press ENTER after each line:
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  3. Remove all tmp*.cat to the following folder:
     % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

     If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
  ***********************************************
  Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 /u softpub.dll
     regsvr32 /u wintrust.dll
     regsvr32 /u initpki.dll
     regsvr32 /u dssenh.dll
     regsvr32 /u rsaenh.dll
     regsvr32 /u gpkcsp.dll
     regsvr32 /u sccbase.dll
     regsvr32 /u slbcsp.dll
     regsvr32 /u mssip32.dll
     regsvr32 /u cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  3. Restart your computer.
  4. Click Start , click run , type cmd in the Open box, and then click OK .
  5. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 softpub.dll
     regsvr32 wintrust.dll
     regsvr32 initpki.dll
     regsvr32 dssenh.dll
     regsvr32 rsaenh.dll
     regsvr32 gpkcsp.dll
     regsvr32 sccbase.dll
     regsvr32 slbcsp.dll
     regsvr32 mssip32.dll
     regsvr32 cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
     Restart the computer.

  ***********************************************
  Remove the hidden %windir%\System32 and its subfolders attribute

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands, pressing ENTER after each line:
     attrib s h % windir %
     attrib s h %windir%\system32
     attrib s h %windir%\system32\catroot2
     output

  ***********************************************
  Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

  To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

  1. Remove all tmp*.cat of the following folders:

     systemroot \system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

     systemroot \system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  2. Delete all the kb*.cat files in the following folders:
     % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
     % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
  3. Remove all the oem *. * files in the % systemroot % \inf folder.
  4. At the command prompt, type the following commands. Press ENTER after each command.
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  5. Restart the installation of the patch failed or the installation of the service pack.

  ***********************************************
  Empty the software distribution folder

  1. Click Start , click run , type services.msc and click OK .

     Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.msc and then click run as administrator .

  2. In the Services (Local) pane, click automatic updates , and then click stop .
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. In this place, the drive is a placeholder for the drive where Windows is installed.

  5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6. In the Services (Local) pane, click automatic updates , and then click Start .
  7. Restart the computer, and then run Windows Update again.

  ***********************************************

  It may be useful