How does a defrag mode safe

Similar Questions

• How can I get Mode safe on my Satellite U300?

  No one knows how to get into the mode safe on my u300. tried the usual F8 unsuccessfully

  Any ideas?
  Getting "The user profile Service has no connection." and he would try the system restore to solve.
  Any help would be appreciatted.

  Hello

  You can access the advanced boot menu using only the F8 key.
  Have you tried to press several times in his line?
  You must press it immediately after the laptop has been powered!

  Sorry, but another way is unknown to me

  You can try to start by using a Windows Vista disk... This could help to repair the operating system.
  In the worst cases, it should reinstall the OS... :(

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How can I disable Mode safe permanently?

  I am one of the many people who use an addon for Firefox called "Leechblock" to help fight against the tendency to waste time online by visiting sites are time consuming, or in my case - visiting pornographic sites. LeechBlock helped, because it allowed me to ban the sites and search for terms that usually, I'd go. The only problem is that I know now I can bypass all of the ban by pressing 'Shift' when I click on FIrefox and the opening of Safe Mode, this allows me to freely search for porn and/or disable the addon.

  I know that many other people use Leechblock in the same goal, and we all are facing this - if we could disable Safe mode on our own version of Firefox, it would take considerably more effort to return and return to those bad habits.

  Others showed how to turn off Safe Mode, but they only worked with older versions of Firefox. What is someone with experience able to devote a little time to understand and explain to the non-technical user how to proceed on the latest version of Firefox?

  Your help would be very appreciated, not only by me, but by others with the same question. Thank you!

  See:

  • CCK2 Wizard: https://addons.mozilla.org/firefox/addon/cck2wizard/

• Instructions to get out of Safe Mode may not work (reboot, reset), then how the heck out of Mode safe?

  Tonight, I went in Firefox for the first time at least two years. When I tried to open the version of Firefox, I got in my Applications, it is opened in Mode safe.

  So I downloaded the latest version of Firefox open, and it automatically retrieved my old favorites. However, the download open mode without failure.

  I have pores through the help files and tried a few suggestions required out of Safe Mode. I closed and reopened Firefox, choosing Reset. That did not work.

  I closed Firefox and restarted my computer. Then I opened Firefox. It opened in Mode safe and gave me no alternative.

  I only went in Firefox, because I couldn't access the router configuration page Cisco/Linksys (198.162.1.1) following the instructions I gave to me. I guess Chrome might have had a problem, so I decided to try Firefox. But I can never know if Firefox might have gotten me in the configuration page of the router, I have to go, because I'm stuck in Mode without failure.

  While I strongly agree with nature without non-profit, open-source Firefox, I remember why I stopped using Firefox a long time ago: it is narrow in its help functions, and it takes too much knowledge of the user.

  So, I'm stuck, and I can never get this router put in place, as I am in desperate need of.

  I doubt that I will check in the forum, because I do not think there is any point. If I can't even get out of Safe Mode - and I don't know how it happened in Mode safe, because there certainly were no accidents in the years more doubled in the course of which I haven't used Firefox - it is useless to attempt to use this browser. If you want to contact me, you can do so through the email address I registered with.

  Have you checked the target line in the shortcut to the Firefox desktop (right click: properties) to ensure that there not - safe-mode switch of attached command line?

  Also make sure that you are not now the SHIFT key or use a hotkey with only the Shift modifier.

• How to defragment and uninstall programs in Mode safe?

  Normal startup goes to a blank screen, need to do a hard closed down and restart in MOde safe mode with networking... I guess there is a problem with a file on some prgram of startup... I want to defrag and uninstall some programs to hopefully get rid of the problem, but I am unable to do either Mode safe... any suggestions?

  Hello

  1. don't you make changes to your computer?

  2. What happen exactly when you try to go to safe mode?

  I suggest you to follow the methods and check.

  Method 01:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Windows xp does not start in safe mode how to

  Computer says windows did not start successfully and does not start in safe mode, will not restart, do not go back to the last known good configuration

  When you choose to start safe mode, which is the last thing you see on the screen?

  When you arrive at the menu of Boot Options Advanced F8, you need to choose in this menu, the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  You won't get past step 1 of KB307654 or install the Recovery Console or do a repair install without a real XP bootable installation CD that matches your currently installed Service Pack (very unlikely).

  You have a real installation CD bootable XP that corresponds to your currently installed Service Pack?

• I don't have a navigation bar and firefox does not open in safe mode to return to the default configuration. Does not work reinstall. Any help please.

  I have no navigation bar since I closed it to have more space on the screen. It will not re - open. Firefox does not open in safe mode, but immediately opens in normal mode with the new configuration incorrect, so I can't reset to default configuration. I deleted Firefox and re-installed and it always opens with the same faulty configuration. Why doesn't Firefox give me the safe mode dialog box, why can I not re - open the navigation bar, and how I can do those two things, please? Firefox is currently unusable for me without a navigation bar with no access to the default settings in safe mode. I can't search the extensions that I use since I have no navigation bar to go to tools, modules, Extensions.

  This has happened

  Each time Firefox opened

  I closed the navigation bar to make more space on the screen and I could not re - open.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0)

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• After installing Windows XP service pack 3, Windows does not start not upward and only able to boot mode safe

  After installation of service pack 3 I try to restart the computer, but I am sent to the screen that allows only "SAFE mode", safe mode with network, etc... Start up.  Windows does not start normally.  Also during the instalation it won't save the backup files msadds... file inetwiz... file inetwiz...

  Hello

  · You receive an error message or error code when you try to start in normal mode?

  · What is the number and the model of the computer?

  Follow the steps below and check, if it helps:

  1 uninstall windows XP service pack 3 from your computer, you can check the link below: how to remove Windows XP Service Pack 3 from your computer: http://support.microsoft.com/kb/950249

  2 start the computer in normal mode, and then install service pack 3 on the computer. Before installing service pack 3 see the link that has steps to take before you install Windows XP Service Pack 3 below: http://support.microsoft.com/kb/950717

• Blue screen at startup - no code error and it does not open in safe mode

  Hello. I have a Sony VAIO (VGN-N130G) which is about 5 years old. I also have a blue screen error at startup. Unfortunately, there is not a code of error/message at all. I tried to start it in Mode safe mode, but it does not work... just blue screen. Is my bread cell phone?

  Hello
   
  
  Method 1.
  If you have a Widows XP installation CD, refer to the article below and check if this helps us start successfully.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
  
  Method 2.
  If the steps above do not help to solve the question I would ask you to perform a repair of Windows XP installation. See the link below for the procedure.
  Perform a repair Installation
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Keyboard does not work in safe mode

  Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

  Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

  With windows, access device mgr by right click on my computer > properties > Hardware tab > Device Manager button. Locate the keyboard in the list. Right-click on it and select the driver tab choose to uninstall the driver. Now, click on the button to update the driver. See if this will solve the problem.

  Kind regards

  Joel

  Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/

• USB ports no-opperational in the Windows 7 environment, does not start mode command line safe

  Quick description: experienced difficulty trying to reformat a HD problem. It has been suggested that I have download the diagnosis of the manufacturer. Did. Restarted the computer as required to run the new program. After reboot, no USB port work Windows. Considering that all my USB inputs, it is extremely annoying. Input devices still work on other computers and still work during the start upward (before windows), also does not open in safe mode with the command prompt.

  I tried to reformat a LaCie HD that was previously used for a Mac for PC usage. Gave me a code 43 error and a problem code: 0000002B. Had a bad"block" in the HD somewhere read that I should try to use the manufacturer diagnostic tools to check the HD on.» Downloaded the "LaCie Update Tool" and installed it. It took a reboot. After the reboot, any USB devices worked. (Will begin another thread on the HD as soon as I have this problem.)

  Tried to restart in Mode without failure. Then the Safe Mode with the command of the DVD prompt. (However, I'm not 100% sure that I'm loading from the DVD, I couldn't find a good answer on how to do something so basic.) Always seems to load in the window 7 - always end upwards the newspaper account on screen - certainly no command prompt.

  The keyboard and mouse work on other systems and the keyboard works fine before the Windows 7 screen (the selection of mode that starts in) so I'm pretty sure that it is a Windows 7 problem. Can't really get in the error codes that I can't enter anything now or move the cursor at all. (I'll try to borrow a non-USB keyboard and mouse).

  After a reboot when it asks me what I want to start the computer in safe mode or normal windows 7, loading the drivers, it stops at:

  \windows\system32\DRIVERS\CLASSPNP. SYS

  I don't know if this is normal or the system stuck.

  I tried a manual reset of the motherboard and deleted manually the CMOS on the motherboard did not help - but don't expect really.

  I think I need to run a disk check / fix from the command prompt, but I can't even at the command prompt to the top.

  Thanks to anyone who takes the time to answer, a lot of satisfaction in advance.

  My system:

  Windows 7 64 bit

  ADM Phenom 955 Black Edition Quad

  ASUS 890FXA-UD5

  Microsoft USB wireless keyboard and mouse

  Less relevant stuff: ADATA DDR3 1600 G XPG 2 X 2 GB, Sapphire Radeon 4670 1 GB, Western Digital Caviar Black 640 GB HD, ASUS DVD/CD drive (DRW 24B1st) Corsair TX 750 W

  The Repair Mode command prompt supports USB devices. Here is how you get there:

  1. put your BIOS so that it uses the DVD drive as its primary boot device.
  2 start the computer with your Windows 7 repair CD.
  3. press a button if you are prompted to start from the DVD.
  4. Select repair when prompted.
  5. Select the keyboard language when you are prompted.
  6. When you are prompted, select command prompt.
  In step 2, you can also use the Windows 7 installation DVD. The subsequent steps are similar to those above.

  The process described above is independent of everything that is on your hard drive. If your USB devices still do not work then you probably have a motherboard problem. If it is a desktop computer then you could by a 4 port USB card.

  If you get an account and password for the boot process then you dΘmarrez not from the CD/DVD. I've seen a number of messages in which people reported that they were unable to boot from the CD/DVD drive. Here are the most common reasons for these failures:
  -L' poster neglected the prompt to press a key to boot from the CD/DVD drive.
  -The CD/DVD boot was not a boot disk or was damaged. Use it on another machine has confirmed this.
  -Some BIOS setting was incorrect. Start with some other boot CD/DVD (for example here: http://pogostick.net/~pnh/ntpasswd/) confirmed it.
  -The CD/DVD drive has been damaged or is unable to boot from a boot CD or DVD.
  -The machine has a hardware problem (for example, a motherboard problem) which prevents start in any mode.

• Help please the windows does not start in safe mode

  I have windows 7 and I got a simple error that I need to fix but I need to get into safe mode. I'm doing the tapping of f8, but it just goes to the login page. Ive tried several times and just can't get it

  Hello

  There are 2 methods to get into Safe Mode.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Windows7

  Use the msconfig method:

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode without failure. For reasons that why you should read this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig as shown in Figure 12 below.
     
     Figure 12. Windows 7 search box

     Then press enter on your keyboard.

  4. The System Configuration utility will open and you will see a screen similar to the one below.

     Click the Startup tab.

  5. You will now be the home screen as shown below.

     Put a checkmark in the checkbox Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     Click the restart button to restart your computer.

  8. Your computer will now restart directly in Mode without failure. When you get to the Windows 7 logon screen, log on to the computer and perform all the necessary tasks.
  9. When done with your tasks, starting in Safe Mode, start msconfig.
  10. When the program is opened and you are on the general tab, select the Normal startupoption.
  11. Press the apply button, then the OK button.

  See you soon.

• Windows Update does not open in Mode safe while trying to install updates that are not installed in the usual way

  My computer will not install the important updates Service Pack. Support.Microsoft recommend safe, but in view Mode Setup without failure, you can not open the program update of Windows (from all programs). If I left click or right click and open nothing happens except that I immediately back to the Safe Mode screen.

  Hello

  • What is the antivirus installed on the computer program?
  • You receive an error message?

  I want to say that windows update does not work in safe mode.

  I suggest you follow the below methods that can help you solve your problem.

  Method 1: You can download Service pack 1 in normal mode and install in safe mode.

   

  Method 2: If above does not work, follow the procedure below:
  Step 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

   

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

   

  Step 2:

  I suggest that you put your computer in a clean boot, try to install service pack 1 and control.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

   

  See also:

  http://support.Microsoft.com/kb/2505743

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.