How does windows 10?

Similar Questions

• How does windows determine when "disable acceleration in games" for control of the mouse?

  I have been using a program called Evernote.  I was faced with a problem with the mouse while using this program on several computers.  The problem is that the window of Evernote is active the mouse acceleration seems to stop working.  When I uncheck the box that says "disable acceleration in games" and then the mouse works normally with the acceleration settings that I chose.  It is as if Windows recognizes Evernote as a game and it is to disable acceleration as it is supposed to do... EverNote is not a game.

  The mouse that I use is a Logitech MX 500 and a MX510 and both use the Logitech mouseware... not the setpoint drivers.  Others with the setpoint drivers have noticed the same problem.

  My belief is that windows is disabling acceleration because I have the box ticked to turn off in games and for some reason any he applies this setting in Evernote.  I want to use acceleration outside the games then unchecking the box is NOT an option.  What determines when the parameter to "disable acceleration in games" is applied to the control of the mouse?

  It is a Windows problem, a Logitech problem or a problem of Evernote.  These more to Evernote sees no problem at their end, assuming that is correct that leaves Windows and Logitech.

  Once again, where to find?  What determines when the parameter to "disable acceleration in games" is applied to the control of the mouse?

  I have a post on the forum of Evernote, which is here:

  http://discussion.EverNote.com/topic/16513-Logitech-mouse-slows-down-with-active-EverNote-window/

  Hello

  You can uninstall the Logitech mouse software and let Windows install the drivers for the device and check if the problem still persists.

  To uninstall the Logitech software, you can see the article in the Microsoft Knowledge Base:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  I hope this helps.

• Pictures... Where/How does Windows store this vital information?

  It's something that intrigued me and I have not found the answer too. It's to do with the data for 'animated' photos data which allows the image to be 'cancelled '. The example here is the use and editing an image directly on a SD card as the figures easily show to explain what I mean, exactly the same thing happens with images published on the HARD drive.
  Taking it to a ridiculous extreme, if you cropped your photos down to almost nothing, they then take "vitually no space upward. However, thay all have the property to 'come back '.

  The question is where and how is this information which was held... need as much space as the image source etc.?

  Example,

  1. I format a small 256 MB SD card, defining the map it is 'by default' and it shows free to 255,565,824 bytes. The point of departure.

  2 image is added nominal size 3.3 MB. The free space is now 252,096,512. in other words 3.3 MB of space taken as planned.

  3. I open the image in the photo gallery Windows and crops until approximately 21 KB in size. The free space is now 255,541,248 with only 24 KB in total used.

  So far so good.

  If this cropped image is opened the possibility to 'come back' is present.

  Where is this info which is held to reconstruct the image? Is there the 3.3 MB of data held somewhere to come back to this image. The same question applies to when the image is on the HARD drive also. Where is the information to restore the image which is held.

  This is something that has puzzled me for a long time.

  Thank you

  > snip
  Where is this info which is held to reconstruct the image? Is there the 3.3 MB of data held somewhere to come back to this image. The same question applies to when the image is on the HARD drive also. Where is the information to restore the image which is held.

  This is something that has puzzled me for a long time.

  Thank you

  ====================================================
  The following path should lead you to the archived copies of unpublished original photos.

  C:\Users\\Appdata\Local\Microsoft\Windows Photo Gallery\Original
  Images.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How does one select type or drag a window using the magic trackpad?

  How does one select type or drag a finder window by using the magic trackpad? I can't find the finger combinations to do either. Thanks in advance

  Do you use the old Apple Magic Trackpad or the new Apple Magic Trackpad 2?

  The Trackpad 2 is only compatible with OS X 10.11 El Capitan and NOT earlier versions of Mac OS X.

  Use on your Mac - Apple Support multi-touch gestures

• How does the virtual machine BACK to Windows?

  How does the NTVDM?  I run an old DOS program written in Fortran 77, which, with the exception of the database has not changed in 20 years.  It takes about 2 hours to start a business.  My boss told me that I can get a better computer.  Upgrading my computer 3 GB RAM maximum 4 GB will make a difference.  When I use the MEM command, I thought that the memory in use is what I take BACK used, approximately 1 MB.  Am I missing something?  More RAM can help?  Help a different CPU architecture?   The little knowledge by going to various sites, I have gained seems to tell me that dual core or quad processors are unnecessary because BACK is a single processor and use it exclusively.  How about a faster chip.  Is there a limit to the speed that is finished on the BACK.  Then addresses NTVDM maybe all these problems Unlike DOS itself.

  Thanks for your help

  Hello

  Your question better asked during the Forum of Microsoft virtualization, for more specialized assistance on this issue, please repost your request here:

  http://www.Microsoft.com/virtualization/en/us/community.aspx

  Kind regards
  Manasa P - Microsoft Support

   

• How does set a printer 'active' in LabVIEW?

  The method PrintPanel for a VI says that it will print to the printer 'current '.  How does set a that?

  On Windows, all applications start with the default printer and the user can change this to be the "current printer"

  but it's different in each application.

  LabVIEW does seem to have no way to set the current printer until it is needed?

  And why can't the method takes a name of the printer in option though?

  I think you're looking the printingefault printer property for the Application class.

• Hanging problam in outlook express. How does it solve?

  Mr President.

  When I open my outlook express. I'm not shift work. hang my outlook express. How does it solve?

  This is a very vague description, but I'm guessing that Folders.dbx is corrupt.
   
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  The path to the message will be very similar to this:
   
  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express
   
  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.
   
   

• What does Windows DO when he "compact the message store? Do I lose all the messages? Is he blind?

  I'M pass my mailbox mailbox busy and get their percentage, but I always get this message box "Compact the Massage store"... but nothing to tell me HOW it will be repeated.  A bit like sign with a doc to read I think...?

  What does Windows DO when he "compact the message store? Do I lose all the messages? Is he blind?

  A value of any help, thanks EvieJD

  Hello

  The messages are really a database and compaction it just removes the white space
  assigned to messages that have been previously deleted. The process does not remove all
  other messages. Compaction of the database allows safer and less likely
  to suffer from corruption.

  Some information here:

  Message when you wake a computer Windows Vista from sleep or when you
  Restart the computer: "Windows Mail can compact the message store.
  http://support.Microsoft.com/kb/936092

  I hope this helps.

• How does the trash?

  OT: Trash.

  How does the trash?

  It seems to be a "sandbox", but a reference to the storage space on each disk.

  I can't find a real situation for the trash

  If I delete a file from the c: drive or the drive e: is the deleted file stored in a different location or the renamed file right on the disc it came? (don't forget the BACK a deleted.doc file was just renamed $eleted.doc)

  Thank you

  In Windows 7, the trash is a named hidden system folder $Recycle.Bin.  There is a file with that name in the root of each of your partitions (e.g., C:\$Recycle.bin, D:\$Recycle.bin, etc.).  Within each of these folders are folders for each user in use on the machine account (there may be additional folders).

  When you double-click on the icon to the trash that is displayed on your desktop that opens is a composite of all files $Recycle.bin for the user account that is active.  In other words, you see the files you deleted all partitions of disk, but you will not see the deleted files of another user of your computer.

  If you right-click on the Recycle Bin icon, you can configure the space used for the $Recycle.Bin records on each partition.  The default size appears in about 10 percent of the first 40 GB on the size of the partition more than 5% of the balance.  As a general rule, you should leave the default size.

  See http://www.csee.umbc.edu/courses/undergraduate/FYS102D/Recycle.Bin.Forensics.for.Windows7.and.Windows.Vista.pdf for more details than you probably want to

• How does ACS check redundancy?

  Hello

  In a router, if you configure the RADIUS server, Ganymede-1 host Ganymede-2, this is how you configure the redundancy of the ACS.  My question is, how does the router check the pulse of each RADIUS server?  By ping or another keepalive mechanism?  What this command do really behind the scene?

  What is happening in our environment, is that Ganymede-1 in Windows services keep stops by itself.  We cannot authenticate and Ganymede service does not switch to Ganymede-2.

  
  Hi Ganesh.H,
  Thanks for the reply.  Looking at the command documentation, it states:
  "If the command is not configured, the timeout interval is 5 seconds."
  So it is default configured regardless I enter this command or not. However, this command does not work as TACACS service does not fail over.  Any other idea?
  

  Kevin,

  This command is not by default configured in cisco swithces the default setting is 5 seconds if you configure timeout Server tacas only without sepcifying the time in sec.

  HTH

  Ganesh.H

• My windows7 32-bit stsrter service Pack 1 dvd is damage. How does this download procedure?

  My windows7 starter 32-bit service Pack 1 DVD is damage. How does this download procedure?

  Use the following guide to convert a standard Windows 7 disc to include a menu of the version to install.

  How choose desired Windows 7 Edition / Version during the installation?
  http://www.askvg.com/how-to-choose-desired-Windows-7-Edition-version-during-Setup/

  UPDATE: you can also use a utility free "ei.cfg" removal tool to remove "ei.cfg" file so that you can choose the version you want at installation time. The utility of deleting ei.cfg is a simple tool that will remove the ei.cfg from any Windows 7 ISO disc image, so to convert the image into a "universal" disk that will prompt the user to select an edition during installation.

  OR you can use another free "Windows 7 ISO Image edition Switcher" tool to change the "ei.cfg" file so that you can convert a Windows 7 installation ISO specific file (for example Windows 7 Ultimate) edition to another (for example Windows 7 Professional).

  This tool works by activating / deactivating the deletion bit in the table of UDF file, eliminating the need unpacking and rebuilding the ISO, which means that it is extremely fast (to patch the ISO to remove ei.cfg takes only a fraction of a second), and the process is easily reversible (by running the utility on a patched by this utility disk image will restore the disk image to its original state).

  Now the question is, how do I remove or change the "ei.cfg" file in the Windows 7 Installer?

  There are 2 ways! You can extract the contents of the Windows 7 installation ISO file using 7 - Zip and then delete or modify the "ei.cfg" file according to your needs. Its useful if you want to upgrade because you can run the file setup.exe directly from the extracted folder and install Windows 7.

  If you want to do a clean install, you can open the ISO file using the "UltraISO" software, "Power" or "MagicISO" and then delete or modify the "ei.cfg" file and save the ISO. Now, you can burn the ISO to a DVD file and install your desired edition of Windows 7.

  =========================================================

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  J W Stuart: http://www.pagestart.com

• How does influence Services.MSC Msconfig.exe?

  How does influence Services.MSC Msconfig.exe?

  .. a small example to better understand my question: p
  Why when in Service.msc, I disabled Acrobat Update Service (for example), the service in Msconfig.exe still is checked in the service menu?
  It is marked as stopped however.
  Service process uncheck = unchecking in Services.MSC in Msconfig.exe?
  Reboot was done of course.
  Thanks, please help!

  The result would be the same.  The best practice would be to use the disable services continuously, change the startup type, or start services and Services using MsConfig just for troubleshooting.

  To see what is happening in real time, life is to try MsConfig and Services, including all necessary reboots etc (if you wish).

  Services can be affected through the registry too.  There are often several ways of doing things in Windows to get the same result.

• How does the creative cloud?  I need to use in the design.

  How does the creative cloud?  I need to use in the design.

  Hello

  Adobe Creative Cloud, a simple monthly subscription gives you the entire collection of tools CS6, and you can access files stored in Creative cloud anywhere you want. Alternatively, you can install the product on Windows or Mac.

  Creative Cloud FAQ contains all required information: http://www.adobe.com/products/creativecloud/faq.html

  Kind regards

  Fatiha
  

• How does the licensing of user/activation/cloud system affect me?

  With the old system to buy and use, upgrade when you can afford , the license has been clear that you could install 2 copies of the software on different machines, offering only 1 has been used both.

  How does the cloud with activation and users now?

  I am a 1-man-band design agency and would like to be able to work on my main desktop machine, while in office, but also on my laptop when out and about. Can elaborate you on how the cloud will work in my scenario? I hope that "Insert here a deity" it because otherwise I just put myself out of mobile business! Laughing out loud

  Also every time a machine dies horribly, it does from time to time, how the cloud will deal with a new installation on a new computer - will I have old TELEPHONE painful activation of a guy trying to figure out why I installed the number of copies 3 or he as magically remember me and my preferences and make something as done steam? See below for users of steam:

  With systems simlilar and steam (for games), you can log into your account and download and use the software on any machine (provide your connection) and any platform (mac, pc, ps3) which is a brilliant choice. You cannot dodge the system either because the minute you "login" elsewhere, the other account is essentially disabled. I could travel in Australia, using my friends Mac and 20 minutes to continue playing a game at home, I was playing in the United Kingdom on a PC. I have no fear of him using the account that I don't tell him how to connect and do not save my details. As soon as I connect to the House once again, his machine is disconnected and disabled even if I left it on. Its simple, but it works brilliantly. It records the cloud or individual preferences preferences too (in case say, its screen is a lower resolution, etc.)

  That's how works the creative cloud - if he shouldn't! IDEA...

  I have a mac and PC at work - how bright would it be to have only 1 subscription on any platform (if only I stick to the 1 user at the right time)

  If the user login is crucial, I could use any machine or platform at any time - cloud of real work, real cross-platform.

  The licensing Creative Cloud membership is more less the same as before, all computers (Windows or Mac).

  If you had a system that crashed, and that you do not clear, what happens when you go to install on a new computer is it would give you an option to 'disable all' (there is a new option). After that, you can reactivate just on two computers, you want it again.

  The software does not support mobile licenses, you can always turn off using the help > "disable" feature. Being able to license on different machines based on a mobile log-in is something that others have suggested as well (good idea), but is not currently supported.

  You can install on your Mac and PC, however, the subscription is not platform specific.

  -Dave

• How does a smart mailbox?

  How does a smart mailbox?

  You define the criteria for the messages that you want to display in this mailbox. Spotlight search within your messages and shows you those corresponding to this mailbox, as if they were really stored there. However, it is has nothing stored in the mailbox.