How fast is the "BOLD" 8900 or newer than 8100?

Similar Questions

• How to increase the sound on my new pavilion g6 everything is up all the way, but not very load

  How to increase the sound on my new laptop of g6 pavilian everything is in place but not very load

  Hello

  One thing that can help is a bit what follows.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• I just bought a new computor. I got Lightroom 5.7 on the old computor and need to know how to download the program on my new computor. Thanks for any help you can provide.

  I just bought a new computor. I got Lightroom 5.7 on the old computor and need to know how to download the program on my new computor. Thanks for any help you can provide.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• How to launch the wifi on a new computer Satellite L350?

  Hello.

  I have just bought a new Toshiba L350 this morning, but I do not know how to launch the Wi - Fi system?

  Thanks for your replies.

  Hello

  Usually, you will be the WLan switch on IT and must use the FN + F8 key combination.
  This should allow the WLan.

  But just one question: why you n t read the user manual? My laptop has been preloaded with manual if the PDF file format

  Was easy to find all the details and inof

• Satellite A30 - 504 - how to remove the old HDD and new mount?

  Hello

  I have problem with my laptop satellite. After the turn on I've got Announces s.m.a.r.t. disk is damaged.

  I do not have it is why I do not know how to remove the old HDD and replace the new statement.
  I will be grateful for the help.

  Hello

  Looking first for similar discussions in this forum? I guess that you didn t ;)
  The advanced search option is very useful and you can search for single yarn that could help you.

  I found this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12526&MessageID=45688

  and this

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12547&MessageID=45752

  It seems that the hard drive on your A30 is in the optical drive, and you must remove all first the STRANGE before you get access to the HARD drive.

  Best regards

• Upgrade of RAM i7 540 how fast can the processor actually use

  I just got a 540 and I want to know how fast RAM i7 processor is able to use to my advantage. The BIOS can deal with setting parameters at a higher speed of RAM?

  Second question, the system tolerates 1.3V RAM?

  Standards JEDEC and Intel Haswell only supports 1600 MHz CL11 at 1.35v

  You can install RAM more fast (probably up to 1866 MHz depending on availability), but it might speed up to 1600 MHz.

  Note that faster RAM installation also slightly increases the temperature of the CPU.

  Don't lose sleep on it, you hardly notice the difference anyway.

  Before I forget, do not install any RAM with a voltage higher than 1.35v.

• How to change the screen on my new monitor ratio?

  Original title: report of the screen

  How can I change my ratio of the screen for a new monitor, I bought?

  Right click on an empty space on your desktop, then...
  Properties-> (tab) settings->
  Then move the cursor in the box "Screen Resolution."

  HTH,
  JW

• How to pass the adobe preloaded on new Pc version

  Hello.

  On my last portable Adobe Photoshop and Adobe first have been preloaded. Now I have a new laptop and I don't know how to convey these programs to my new laptop. Or I can't do that? Or how to get the product keys for these versions?

  Thank you.

  PS: I'm German. Sorry if my English is not good I wrote wrongly somithing or if made grammatical mistakes.

  You man not copy, you must perform a new installation

  Lost information - response #1 in https://forums.adobe.com/thread/2008767

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• How to activate the CS4 on a new Mac that doesn't have a CD/DVD drive?

  One answer to that, elsewhere in the Forum was to copy the disks on a USB and then copy them to the new computer, and then use it to install CS4 (or any version of avant-nuage) on the new machine. It works for CD-1. But there is no way to 'install' disc-2 or to make the complete installation process half picking disk-2. How can I install CS4 on my new Mac?

  Download the installation files and use them to install.

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

• How to drive the sample photos featured news Widget with my own?

  Almost ready to publish my site and I would like to know the best method to replace the thumbnails of the sample (different flowers) in the Composition > News widget featured with my own photos. My site does not have photo albums or slideshows.

  I look at the active panel and see the sample images, but it is not clear to me how to make a simple replacement with my own picture which I want to be a miniature size exactly as sample.

  Thank you!

  Hello Westina,

  Please check this little video that I created to show you how to replace the image with one of your own (please listen to the audio as well): http://jingsite.businesscatalyst.com/jing/2013-11-01_0020.swf

  I hope this helps.

  See you soon

  Parikshit

• How to change the default name of new adjustment layers? (and other Q)

  How can I change the default name of new adjustment layers?

  How can I do to make the adjustment layers do not come with a mask when I create them (unless I have an active selection)?

  Why isn't the functionality of shadows / highlights an adjustment layer? It is accessible under "settings", but you can use it not destructive

  Where can I find documentation on the API of Photoshop? (I want tools do it o - javascript)

  How can I do to make the adjustment layers do not come with a mask when I create them (unless I have an active selection)?

  It is an option in the drop-down Panel. Uncheck the 'Add a mask by default'. No mask unless you have a selection active.

  (it is using PS CS6, don't know about older versions)

• How to move the FLASH_RECOVERY_ARE file to new drive?

  Thank you for taking my questions!
  
  Does anyone know how to move the files from e:\oracle\flash_recovery_area\* to a new disk?
  
  Thank you
  Kathie
  
  THE OPERATION HAS FAILED:
  I created a new pfile.
  Edition pfile changing old drive to the new drive letter letter.
  immediate stop
  to the E:oracle\flash_recovery_area\ S:\oracle\flash_recovery_area\* *.
  startup nomount;
  Create spfile from pfile;
  stop immediately;
  startup
  
  Now I get ORA = 38760 - this database instance could not turn on the flashback database;

  Kathie,

  Try this by first editing the database

  1) First Turn off Flashback:
  
  SQL> alter database flashback off;
  
  Monitor alert log for messages regadring flashback:
  
  Then s turn the flashback on again.
  
  SQL> alter database flashback on;
  
  SQL> Alter database open;
  

  Concerning

• BlackBerry BlackBerry classic classic has not survived a plunge, how to put the backup on a new device.

  Like I said in the title of the topic, my classic BlackBerry did not survive a swim in the toilet. I did all the stuff found on the internet such as put in a sealed air box full of rice for 48 hours, but he simply no longer lights.

  So fortunately I seem to have a backup file .bbb on my desktop since 12/18/2015.

  1. is there a way to restore the data in a usable format (just the file .png etc)?

  2. is there a way to restore the data on a new classic of BlackBerry? I guess I can do that by choosing switching in BlackBerry link devices, connect the device again and put the old backup on that? I probably should update the new device to the latest version of BB10 before you transfer.

  Hello

  leejjon wrote:

  So fortunately I seem to have a backup file .bbb on my desktop since 12/18/2015.

  1. is there a way to restore the data in a usable format (just the file .png etc)?

  In native mode. Design of the BBB file intent should be used as source for restore to another device of BB. No other function is natively. But there are several 3rd party PC utilities that can extract the data and make it into a format usable otherwise. Never need such a utility, I have no recommendation... but a few seconds on your favorite Internet search engine should reveal many options from which you can choose (and many of them I believe are free).

  leejjon wrote:

  2. is there a way to restore the data on a new classic of BlackBerry? I guess I can do that by choosing switching in BlackBerry link devices, connect the device again and put the old backup on that? I probably should update the new device to the latest version of BB10 before you transfer.

  This is the intention of the exact design of the BBB... file to use as the source for restore to another device of BB. Reference:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000033526&language=English

  Good luck!

• How to avoid the string * empty * on new pushScreen

  Someone knows how to avoid the string * empty * coming on each press of the screen and instead * void * can I have my own channel at the same place... Please let me know its possible or not...

  

  Thank you

  read the API:

  http://www.BlackBerry.com/developers/docs/4.7.0api/NET/rim/device/API/UI/component/ListField.html#se... (java.lang.String, int)

• How to save the password for a new ISP on my printer 5514?

  I recently changed my ISP and need to make a change to my printer HP Photosmart 5514.

  When I originally installed the printer on my laptop Windows 7, I've provided the network and password for the existing ISPS and they were saved during the installation process because I did not re - enter the password every time I turned on the printer to use.

  With the change to a new ISP, I used the wizard wireless on the printer to select the new wireless network and enter the password.  The printer worked fine, except that the network and the password was not justified.  Whenever I turn the printer off and then turn it back on to for reuse, I re - select the network and enter the password again.

  Y at - it of some sort that I can save the function/password without reinstalling the printer?

  Looks like the printer is still trying to keep the old network information.

  Try a Hard Reset:
  * Unplug the printer while the power is on
  Disconnect the other end of the power cord from the wall jack directly
  * Wait 30 seconds
  * Plug the unit back to

  Network information is reset by default:
  * Press on key/Setup menu in the top right of the touch screen of the printer
  * Select the wireless option
  * Scroll to default network

  After you restore the default settings, then try to run the Wireless Setup Wizard. Let me know if the unit still does not retain the information.