SBS 2011 drivers needed

Similar Questions

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• Cannot add computers to an SBS 2011 Standard field; Connect the missing site

  I installed SBS 2011 as a new installation.  Things seem to go well... no error and the system works, works by e-mail.  The problem is that when I try HTTP://connect or https://connect to add a computer to the domain of errors.  When I go in IIS there is no Connect Web site.

  How this site to install without having to reinstall my entire operating system?

  Thank you all in advance for your help and assistance.

  See you soon,.
  Cameron

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Hi, we are a provider of disability. We have SBS 2011. Access 35 server now. You want to 125 so they can get the email and sharepoint.see below:

  Hi, we are a provider of disability. We have SBS 2011. Currently we have about 35 access to the server. - 9 direct to the server and remotely via web browser rest (we understand it goes to 75 licenses?) We want to add our support staff total 125 to pass the email and sharepoint. Only 35 max could be connected at all times. We have about 35 PC that would have access to the main server of 10 sites. do we need to move away from SBS 2011?... Thanks Jack

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Is there a limit for Windows 2008 member server how can be added to an area of Std SBS 2011?

  I have a client with 60 workstations, they the thoughts that they need separate Ad, a separate file and print...

  I mean get SBS 2011 with the added LOB servers

  They want to know how can you add?

  Best regards, Scott Whitwell

  Hello Scott,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Can I switch to SBS 2011 SBS 2000?

  We are running SBS 2000 with a total of 50 CAL and you want to upgrade. Can do without SBS 2000 to SBS 2011, or are we looking at a new everything and pay full price for the OS and the additional CAL?

  Hello

  You will need to create a new post on the TechNet forums for issues related to Small Business Server: http://social.technet.microsoft.com/Forums/en/smallbusinessserver/threads

• Problems of SBS 2011 Windows Update after you uninstall WSUS

  I have a Server SBS 2011 I uninstalled WSUS on.  Due to the usual problem of disk space on the server.  I uninstalled WSUS because I don't mind the jobs goes directly to Microsoft Update on the Internet.  But after uninstalling WSUS on the server, workstations stop download of updates completely.  It indicates that Windows updates are controlled by the administrator.  I can check the updates manually by selecting "Check for updates on the Internet".  How can I get the workstations to download updates normally by using the web site of Microsoft Updates?  Thank you!

  Hello

  I suggest you re-post your query on the TechNet forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• SBS 2011 ceased to recognize drives external, used for the backup of the shadow

  I have two external drives used for backup on a SBS 2011 server. The other one is a WD drive a Seagate. Shadow copy not now don't recognize either drive.  Both drives worked on the server for about 9 months and are not anywhere near full capacity. The server is now saying that it can't find the drivers for external drives, he previously used the last 12 months. Both drives have been tested, are recognized and work correctly in any windows 7 computer. Is there a way the GET the server again recognized the readers?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  Small Business Server

  Hope the helps of information.

• SBS 2011 and Windows 2008 file share

  I have a sbs 2011 and a regular Server 2008 domain. I need to set up a file share that can see both areas. I discovered what a normal two-way transitive trust between them is a bad idea. Wanting to know if there is a better way to do it by side just setting up user accounts in the regular field of 2008 (where the share resides) which corresponds to the account of sbs domain, setting up the collective right to the share, and map the drive to the sbs domain workstations. I don't like this method because changing a password on the sbs domain would require a manual modification to synchronize on the regular field.

  Hi Mialbert,

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet (Small Business Server) Forum

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

   

  Hope this information helps.

• ESXi hosts SBS 2011, clients lose network via VPN

  Greetings,

  We have an ESXi Server (in a lab environment) who perform a SBS 2011 and a Windows 2003 (Terminal Server).

  We have two locations, connected via a VPN IPSec (2 boxes of ClearOS).

  The ESXi host is located in building r. customers in the construction of an experience no problem at all.

  Customers in the building B often lose connectivity to network share. We also failed when copying data. Do not forget that the servers are located in the building and issues affecting only users in the B building.

  We noticed the event ID 2012 on the VM SBS 2011 event viewer.

  The two buildings are connected to a cable broadband 10 mb / 1 mb ISP.

  NOD32 Antivirus is installed on the two virtual machines

  Any help would be appreciated!

  Thank you

  Fred9777

  Hello

  There are a few things to look out for more such links. The following steps were made on W2K and W2K3, so that they are still applicable for you.

  (1) is the VPN capable to manage the packet being sent by site B MTU size, sometimes the MTU on VPN size must be less than the default value of 1500 set LAN. You can check this scathing your server with a command like

  ping f-l 1500

  If you get a message like "packet needs to be fragmented but DF parameter.

  You will need to reduce the size of the MTU TCP/IP in the client registry. Try to ping the server with a size of 500 bytes and see how it goes.

  (2) setting the server TCP/IP stack

  In the registry HKLM \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, create or modify value DWORD of TcpMaxDataRetransmissions. By default, it is set to 5, but I recommend double this value to 10. The TcpMaxDataRetransmissions value is the number of retransmissions of TCP of a data segment without acknowledgement of receipt on an existing connection. TCP retransmits data segments until they are acknowledged or until the expiry of this value. Basically, when a client does not meet a package from the server, the server will attempt to retransmit the packet until TcpMaxDataRetransmissions many times. By increasing this value, you give the customer more time to answer on the server, which will help improve the flaky connections or connections with latency or higher than normal packet loss.

  HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveInterval and HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveTime.

  Both entered DWORD.
  KeepAliveInterval determines the interval between retransmissions keep until a response is received. If a response is received, the delay until the next keep alive transmission is again controlled by the value of KeepAliveTime.
  The connection will be broken once the number of retransmissions specified by TcpMaxDataRetransmissions is remained. KeepAliveInterval is set by default at 1000, which is one second.
  KeepAliveTime controls how many times TCP attempts to verify that an idle connection is still intact by sending a living package of the Dungeon. If the remote system is still reachable and running, he will acknowledge receipt of the living transmission to keep. KeepAliveTime is set by default to 7 200 000, or 2 hours.

  I hope this helps.

• SBS 2011 OEM installation on a Hyper-V host

  Running SBS 2011 OEM.

  Can we install a HyperV host and install the SBS 2011 on this host as a virtual server?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• SBS 2011 Bootmgr missing

  I have a Dell T110 II with SBS 2011 Server installed. I get an error message Bootmgr missing

  When I boot to the installation media and select Repair, the repair goes directly to recreate the Image on your computer and does not give me the options described in https://support.microsoft.com/en-us/kb/2501318

  I have a backup, but would rather just repair the bootmgr but I can't go to the repair of the tools on the installation media

  Thanks for any help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• SBS 2011 no usb drives

  You have learned to be joke me! No direct path to SBS 2011 forums. With confusing like all the getout of here. No wonder that support is pathetic. where is the Server forums GISH?

  It is a forum for specific consumers.

  You will find support for SBS in this TechNet forum: http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver

• Windows SBS 2011 MS transportation service continues to stop

  Continuous transport of Windows SBS 2011 MS downtime, users cannot send or receive e-mails.

  I renamed the file queues to old but the problem persists. Help, please.

  Joshua,

  I would have you post here for assistance more.

  http://social.technet.Microsoft.com/forums/en-us/home?category=SBSServer

  Thank you.

• SBS 2011 style Web Access on 2008 R2 Enterprise

  Hello

  Basically, I want to install a webpage type SBS 2011 remotely to my 2008 R2 Enterprise server. I can't connect a SBS server to my existing domain so is there a way to do this?
  Any help would be appreciated.
  Ed

  Hi, Ed,

  I think your question would be better served if posted in the Forum Windows Server on TechNet

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Useful links

  http://TechNet.Microsoft.com/en-us/library/cc731923.aspx

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/1bf1d395-cac8-4a62-8E94-20d04ebc0ae0/unable-to-remote-access-my-Server-2008-R2