How install sata ide converter adapter

Similar Questions

• How install SATA driver on existing installation of Windows 7?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: when I originally installed Windows 7, I did not load the drivers SATA/Raid/AHCI and would like to do now - is this possible?  I have not yet found a way.

  Thanks in advance,

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Terry Davidson

  Me too. If you change the AHCI discs do not recognize the new format. That is why I always use the IDE provided with my an ASUS P5N - D motherboard. I have very good results.

  

• Installation of XP using F6 to install driver SATA controllers. which adapter?

  This is my first experience with and try to install a fresh copy of XP to a SATA HDD (in a new ThinkPad T60). I got regarding locating and loading the Drivers Intel Matrix Storage Manager installation. But now has four adpaters SCSI to choose from:

  How do I know that you choose (I've never started the ThinkPad) or is it important?

  PS, I see only an adater (second) seems to be highlighted by default and is one of the two referred to in this description of the Lenovo driver. The other card mentioned does not appear on the list. What are the chances that by default, this is the right one and I could damage anything if I chose, but was not sure it was the right SCSI adapter?

  Since my original post I took a chance and proceeded to load the preslected SCSI card, but still deadlocked when installing XP says: Setup did not find any hard drives installed in my computer.

  Any ideas? Thank you

  I read and use a number forums regarding a certain number of topics or interests, especially to help myself and thus am especially able to solve the problem I encounter. I do not often post except to help others help me or offer help to others. I don't want to be selfish, but especially there are others out there much more competent than me who are willing to and troubleshoot.

  In this case however, I thought and turned to this Lenovo community forum was the most appropriate for the first time and even contacted Lenovo telephone assistance for an answer to my problem.

  I don't want to seem ungrateful, but Lenovo Technical Support, nor anyone navigating this forum offered no help in what I just accidentally discovered is a simple solution to a simple problem. And it's like desricbed, only four adapters are displayed when the method F6 during installation of XP to install SATA driver controllers, which none worked or put in correspondence adapter described in the support page this driver Lenovo or Lenovo support this page describes how to install Windows XP for T60 and T60p ThinkPads.

  Unbelieveablely support Lenovo nor anyone browsing these forums has been able to tell me, it's that Microsoft in the XP installation does not indicate that additional adapters can be found (hidden) simply using up or down keys to scroll. Once I did that I saw the card that I had to choose, continue and have windows 'See' the SATA hard drive.

  So there you have it for technical support from Lenovo or anyone who could not install XP on a ThinkPad T60 using and following the Instructions and Intel Matrix Storage Manager Driver and instead, was first to enter the BIOS. CONFIG and change the value for SATA of DCIS of compatibility to install the drivers and then subsequently modify the BIOS again:

  Just scroll down and you should see your map!

• Map 2.0 to SATA/IDE adapter hard disk with the Windows 7 software clash.

  (Interface?) interaction between a Sabrent USB 2.0 to SATA/IDE Hard Drive Adapter Product Code: USB-DSC5 and my Windows 7 Home Premium 64-bit

  I'm having a problem with the following situation:
  When it is connected to the IDE Maxtor and Western Digital drives and through the use of your product, Windows 7 tellls me that the hard drive "is not ready". Is this a message issued by the software of Windows 7?
  If Yes, how Doi go on "prepare disc" if I could change the disc number or size of each partition type and/or reformat?
  .

  I would appreciate your help to help me resolve this unexpected report of the interaction of Windows 7 with this card and hard drives it holds 40 GB and 80 GB IDE Maxtor and Western Digital drives. I try to use Windows (or other third party software) to resize partitions, change the disc type and optionally reformat.

  Thanks kindlly

  Your machine to drive specific details to this model for adjustment of jumpers, must be set to master. Up to what the right configuration of jumpers are set, don't try to do anything else.

  If you need recover the data, you will lose everything on the disk if you try "initialize" in management records

  Is not ready "device" win/Disk Management can not 'see' the reader correctly.

  The only thing you can do in disk management, once the riders are positioned, is to assign a drive letter if it is not affected

• How to re install the IDE controllers?

  I actually when I put any CD or DVD on my laptop it will slow down just at the moment when I opened my computer to check if its connected or not, and at least his deon can't connect, or my windows can read and when startup too because when the DVD inside the laptop its is not starting , but when I take wide windows suddenly start normally, I looked for a solution and I found this one on curtis:

  Open the Manager of device on your PC.
  
  Uninstall your two located under IDE controllers IDE channels.
  
  Reboot, let windows re install the IDE controllers and all should be good.

  And everyone was saying of his work, but I don't know how to do!
  
  Help, please!
  
  "" I need the DVD to repair my windows 7, bad ".
  
  .. .and at least it is not connected!
  
  

  Hello Mazinho.  I understand that you're curious how uninstall/reinstall your IDE controllers.
  
  I assume you are using Windows 8 based on your screenshot.  The steps should be similar for other versions of Windows as well.  Try the following.

  1. Using views of the subway or Office Windows + X key combination.  This opens the context menu.
  2. Select Device Manager.
  3. Expand the section of "controllers IDE ATA/ATAPI.
  4. Right click on "IDE controller' listed here and select"Uninstall ".  If you are prompted only remove the driver.
  5. Reboot the laptop.
  6. Loading Windows must be reinstalled the software for the device.

  If you have additional questions, do not hesitate to ask.  I wish you a great afternoon!

• Hi, my old Windows XP computer died & the disc removed and installed in a box Sata/Ide.

  Hello

  My old Windows XP computer died & the disc removed and installed in a box Sata/Ide. I managed to export files, etc in my new Touchsmart Windows 7 with 310.

  My old AddressBook has been exported successfully to the "Contacts" folder, but I can't "export" of contacts to the contacts list in my Windows Live Mail program.

  I am connected to Windows Live Mail.

  Please can someone help as I am confused with the Export/Import tabs & the small windows that follow.

  All the best, fastfreddie.

  Assuming XP Outlook Express mail software, see this: http://email.about.com/od/livemaildesktoptips/qt/Import_Outlook_Express_Address_Book_into_Windows_Live_Mail.htm

• I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I don't think that you can do in XP. I think that you need x 64 XP, Vista x 64 win7 x 64 or windows server x 64. As it says here

  The only thing you can do in XP's format

• Installed Windows 7 in SATA IDE value controller

  This may or may not be a silly question, but I'm extremely curious.

  I reinstalled Windows 7 on my HP p6210f, using the recovery disks that I made.  However, I still had the controller SATA IDE, value, because I had a different hard drive in this machine that has Windows XP.  Of course, Windows 7 wouldn't start, and realizing my mistake immediately, I went into the BIOS and changed the AHCI controller.  Windows 7 has started then fine.  Windows 7 seems to work OK, but I want to know whether or not I could have caused a potential problem that may arise later.

  If it makes any difference, I noticed that all of the devices listed in the Device Manager have no points mark next to them.

  Another quick easy question: a factory restore is possible if there is a different amount of memory in the computer, or a different size than the original hard drive?

  Hello:

  As I have indicated above, no harm has been done loading W7 in IDE mode. No damage will result, some bad things will happen.

  But since you don't mind doing another restore... I would like to change the setting from ACHI and do another cover so the hard drive can enjoy the NCQ.

  Paul

• Portege 2000, cannot install windows, ide errors

  Any help much appreciated...

  former owner deleted the 20 GB hard drive. Have the Toshiba pcmcia reader. Flashed the latest bios. It will boot xp or 2000 cd without problem, however the two OSs stop initially with bsod (2000 gives inacessible_boot peripheral).

  Tried with ME, but the cdrom driver is not the right one (does not load the cdrom drive). In a situation like this, normally, I remove the drive and install (with hard drive adapter) on a pc to format and copy the OS files and then reinstall the drive and start the installation from the hard drive but it has a 1.8 drive "and I have no adapter.

  Help!

  Mick

  Hey Tyson,

  Sorry, but I'm a little confused about your explanation. If I understand you right, you bought used protégé 200 with Toshiba external CD-ROM device (PCMCIA) and you try to reinstall?

  I understand you correctly?

  As much as I know in original Toshiba Recovery CD there is driver for external "TOSHIBA CD-ROM" (PCMCIA/CARDBUS) and it will be loaded at the beginning of the recovery procedure. If it works with no Toshiba devices is unknown to me. If you want to reinstall the OS without the original CD from Toshiba, you must start the laptop using the startup disk with the right driver for external device.

  As you said that the best solution is to start the installation of the HARD disk. You need a Google around and I'm sure you can find one for you. Please visit this site
  http://www.Addonics.com/products/Saturn/aesed.ASP. He is described as the optional kit 2.5 "converter can be used for the 2.5" or 1.8 "IDE HDD.

• That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  My computer is having problems when I bought all first it was from another provider which came as a set overclocked PC up the unit everything needed had to be put in my case & add existing hard drives & DVD etc. readers added on the implementation. I used the same location for more than 10 years before that I always built them myself I can build a good setup computer I correspond to different parts inside each other, and then he tested & sent.
  Unfortunately, the store has closed & the owner is sick cannot get their hands on him more & I had to get some add on things like new SSDS & some other bits in my system & the young boy said he would could do this job, but everything went wrong & I lost all new so I decided to recycle me like I used to do it before windows 7-64 came out I was going through a rough patch with me being paraplegic in any case it is difficult to build a new PC, so I chose this store & their confidence that went wrong now & I've been research & learn to catch up with the new technology, I do what I do anyway.
  Thing is my system is never one that you can purchase a manufacturer & I left it with the young boy & it came out all memory & was not necessary but of course upset of that ruined the setting completely overclocked so I did it myself & I got the work faster than ever, & quieter PC I just got the score that he had now , so I'm happy with it, but the names I came across while overclocking I came across that I'm not average or really lot as were dealing with Fast CrossfireX DDR RAM 1600 MHz.
  Please don't tell me that I should not be messing around with what I made since 1989 & made great strides in how everything works, I am not aware about this sort of thing I know SATA what it is & done, but those responsible for setting came from the part of overclocking in the BIOS I put then correctly , but I wanted to know what they represent in more depth. Thanks to anyone who can put me wise on these 3 points only. Malcolm.

  I'm pretty sure that you are on the wrong "forum" for this type of topic. This forum is designed as a support Pro-type Surface ultrabook/tablets and tablet-like Surface.

  That said,

  AHCI - Advanced Host Controller Interface - this is a hardware mechanism that allows the software to communicate with the devices Serial ATA (SATA). It offers features such as connecting hot and native command queuing (NCQ).

  IDE - Integrated Drive Electronics - IDE is basically the 'old' version of AHCI without connection to hot and NCQ. (It is usually used during the era the Parallel ATA (PATA) hard drives)

  Now. Mode AHCI and IDE mode - what is - this? IDE mode is to give you the greatest compatibility with older operating systems. AHCI is as I mentioned above, a modern version of the IDE - use the AHCI mode if you are running recent operating systems (Windows Vista + and Linux kernel 2.6.19+).) IDE mode will allow you to connect older operating systems with SATA drives.

  As I mentioned above, SATA is Serial ATA and the replacement of hard drives Parallel ATA (PATA).

  RAID - this is a storage technology where combine you multiple disks in a unit of 'single', depending on the mode, there may be RAID-0 and RAID-6 and each with different hard drive configurations. I will explain the simple examples: RAID-0 , which is the distribution but no parity or mirroring, this means that there is no data redundancy, if there is a failure on a disc, it will cause the loss of data on the entire RAID array. Ex: You 0110 as writing the data, 01 goes on disk 1 and 10 goes on disc 2, allowing a faster data read/write access.

  RAID-1- This is the opposite of RAID-0, which is mirrored without interlacing (no parity or the other). Basically, this means that you have an exact clone of disk 1 disk 2 disk 1 failure.

  RAID0 + 1 is that both RAID 1 and 0 is, IE interlacing (write data simultaneously to two [or more]. disks more mirroring failure) the minimum amount of disks required for this type of installation is 4 IDENTICAL drives.

  There is also RAID 2, 3, 4, 5, 6. That is just more implemented different configurations of distribution/parity/mirroring on disks.

  That being said, your RAID mode will allow you for some type of RAID configuration, if you choose to do so.

  Supplement: Many SATA controllers can enable AHCI separately or in combination with RAID support. Recommend Intel choose RAID mode on their motherboards, allowing also the AHCI, rather than AHCI/SATA mode for maximum flexibility (in the case that you ever want to build a RAID array), because there are a few problems that occurs, usually BSOD, when you choose a different mode once an operating system is already installed.

• How to open or convert the .avi file on old mac running OS.10.6.8?

  How to open or convert the .avi file on the old mac running OS.10.6.8.  We tried downloading several conversion programs as well as programs that run .avi, but everyone's message could not be opened on the mac or require a fee.  Anyone able to fix it.  We have great audio video file we need to convert.

  Try to use MPEG Streamclip; You can be told to install Perian or another component, or who does not open the AVI file. AVI is a container, not a format; no single component or codec will open all reviews, and some cannot be played or converted in Mac OS X.

  (142484)

• How to play (or convert) a file .avi on my MacBook Pro?

  How to play (or convert) a file .avi on my MacBook Pro?

  Probably by installing VLC, but some AVI files can not be played in Mac OS X; AVI is a container, not a format.

  (141493)

• How to identify a bluetooth adapter internal since an Interface Card by simply opening a laptop cover?

  How to identify a bluetooth adapter internal since an Interface Card by simply opening a laptop cover?

  Hello

  See if that helps

  How to fix a Bluetooth adapter internal

  http://www.laptoppartwholesale.com/eBlog/how-to-attach-an-internal-Bluetooth-adapter.html

  Installation of a wireless card internal

  http://www.laptoprepair101.com/laptop/2008/03/08/installing-internal-wireless-card-into-older-laptop/

• How install update c1900101

  * Original title: fredpgreen

  How install update c1900101

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• No access to the personal files of Windows 7 to the disc format hard using a new computer that connects with a USB 2.0 cable to SATA/IDE in Windows 8

  I have a HDD that has been removed from a computer that does not work and I try to access my files staff on it. When the drive is connected, it appears as two items in Explorer: 'system Reserved (f)' and 'disk space (g) '. This drive has been connected to my new computer using a USB 2.0 to SATA/IDE cable.

  I can see all the program files and public folders in the path (g), but not one of my staff, including music, documents, photos, etc.. The path (f) does not seem to access anything whatsoever.

  My new computer using Windows 8, the hard drive, I'm trying to access Windows 7.

  This seems to be a security problem, that I have no idea on how to fix. I tried enabling 'total control' in the tab 'security' in the properties, what has not changed the situation.

  All solutions/advice would be much appreciated.

  Thank you.

  Hi David,

  1. What is the brand and model of the hard drive?

  2. do you get an error message/code?

  3 have you tried to connect the hard drive to a different USB port?

  4 have you tried the search for files by using the search function?

  This problem may be caused by the virus or files might be hidden.

  Method 1:

  Scan the hard drive for viruses:

  Reference:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  Follow these steps and check:

  a. press the Windows key + X

  b. Select Control Panel and folder options.

  c. in the view tab, select Show hidden files, folders and disks and click on apply and then OK.

  d. check if you can see the files on the hard drive.

  I hope this helps. If the problem persists, you can write to us and we will be happy to help you further.