Question of Netrestore El Capitan

Similar Questions

• Questions to THE El Capitan fixed yet 2016?

  Is anyone know if validation in Logic Pro X is resolved for all the current versions of * contact * play 4 East West * sampltank in El Capitan 11.3 yet?

  IMac 13.1 2.9 16 GB 1

  Yosemite 10.5

  No problems with Kontakt in LPX 10.2.1 and 10.11.3 or 10.11.4b

  Do not use the other two... but in the reports that I have read... almost all, if not all of these issues have been fixed in point 10.2 with El Cap 10.11.3

• XPC questions-LaunchServices, CFpreferences, El Capitan errors

  I'm unfortunately whits end here after Ben my head against this for weeks and seeking aid because I really need to get things resolved.

  I know it's bad form replying to your own message, but I forgot to include the following question.

  Can I remove the. The directories Sportlight_100 and .fseventd in an attempt to make them properly refreshed and avoid the problem that seems to follow the drive to another system?

  Thank you.

  Tom

• Question of OpenCL El Capitan with MacBook Pro

  Hello. I gave my MacBook Pro (2014 15 "retina, 7200LE GForce 750) a new installation of El Capitan 10.11. The hard drive has been wiped and I reinstalled OS x from scratch. I tried to use the first with the Open CL GPU acceleration, but all my pause the video snippets like this. It didn't happen with previous OS Yosemite. Changing software of mercury reading only solves the problem, but I would use the Open CL. Any thoughts on how this can be corrected? My MacPro with AMD cards does not exhibit this behavior.

  It is a problem with El Captiain: now turn off hardware MPE.

• Question of OSX El capitan

  Hey I just want to ask if around 600-900 MB and 5-20% is acceptable for the kernel_task in the activity monitor.

  Thank you!

  IM using a MacBook Air 13 "2015

  i5, 8 GB, 256 GB SSD

  I hope so. Mine is currently using 1.8 GB.

• Tired of El Capitan police issues

  I'm tired of questions from police El Capitan!

  I removed everything except the installed system fonts, but there are constant conflicts of fonts and display of gibberish characters.

  Apple font management application is not a comparison of all THE fonts on my computer, so the fonts that I use for my design work cannot be analyzed with the newly installed system fonts.

  Again, the people at Apple are decide what should be the decision of their users and impose their judgment and their aesthetic design on the people who pay for their products.

  

  Any help would be appreciated.

  Have you had a look at

  http://www.jklstudios.com/misc/osxfonts.html

• External screen does not work after update of El Capitan

  Hi all

  I hope someone can help out me with this. I have a MBP 2011 (i7, 4 GB ram, 330 M) and since I've updated to El Capitan (now 10.11.2) my external screen no longer works. I use a HDMI Cable MiniPort who worked before the upgrade. I am trying to connect to a 720 p TV and tried to connect it to my 28 '' ASUS monitor 1080 p that I normally use for my Windows desktop. None worked. My MacBook display blinks for a while when I connect it and then nothing. I was not able to connect it to my projector via VGA USB adapter until I've found the last update on the Web site of the adapter, then at least the display has been resolved. I tried the 'View to detect' button in the preferences system, no luck.

  I had the same problems. I installed El Capitan in MacBook Air early 2015. My external monitor is Dell P2314H. After installation, the MacBook Air is no longer detected the monitor, and the monitor does not save any video input to the computer.

  I chatted with Apple Support, but they don't give me satisfactory answers.

  Then I came across this answer on another thread of discussion the similar question:

  Re: El Capitan does not detect my external display

  And the solution that works for me is proving to be as simple as changing the cable. So I stopped using official mini Apple displayport to HDMI/DisplayPort/DVI connector. Instead now I use a cable (mini displayport to displayport in my Dell of MacBook Air) I bought locally (I live in Jakarta, Indonesia). It works like magic.

  I hope this helps you.

• Several wallpapers (desktop computers)

  OK, this could be a crazy question. In El Capitan, I was just messing around with drag of the mouse. As I double finger slid left, I noticed that my previous wallpaper appeared. What is the purpose of these multiple wallpapers? There are at least 5 previous that I used. It can be used as separate work stations, and I can switch back. I'm just curious to know how others use these essentially in short. It's on the iMac 27 "5 k retina

  Looks like you have several trays of office set up with each showing a different wall paper. An easy way to get a glimpse of this is to click on the Mission control. The current display you have will be slightly reduced and at the top of the screen, you will see a banner with each asset Office marked ' Office 1, office 2, etc.. One way might be easier to switch between them is to hold down the Ctrl key and click the right arrow or arrow to the left. In general, I use 2 desktop computers to simply keep the different workflows and related programs in their own separate office (Safari running in one, Firefox running in the other). Initially, I had the same wallpaper in each, but changed one to make them easily dissociated from each other.

• Problem with the mouse and trackpad

  I bought a MacBook Pro a week ago and am just learning how to use it - took computers from the 1970s, but it's like learning a new language.  New laptop has a memory of 8 GB and 256 GB SSD.

  The touchpad on the laptop is defined the way that Apple prefers - push upward on the trackpad and what is on the screen moves to the top.

  Being very happy with the PC software, I had a life expectancy of the scroll on a mouse wheel to do things in the normal way, but because the creation 'trackpad' and 'mouse' are coupled to the computer, a fixation breaks to another.  I have a Logitech M705 mouse that fits my hand perfectly.  I called Logitech, and even if we got their mouse software installed, it doesn't have a setting to reverse the direction of scrolling.  I found and download software that allows me to "reverse" the scroll wheel button to be and that's what I use now.

  My question is whether El Capitan, or perhaps even Sierra, a tool that allows me to do this without having to use outside software?

  As a follow-up question, can anyone recommend a wireless mouse that is designed to work with the MacBook Bluetooth without having to use a plug in dongle, which takes half of my USB connections?  Preferably something important, which is 'in', not ' under' my hand?

  Hello. Have you tried to navigate to system preferences and the mouse. And uncheck "Natural direction" here.

• Should I load Silverlight plugin on my Safari on iMac?

  Not sure why I can watch is no longer trailers of movies on my Amazon Premium Video account. A message appears saying I should install Silverlight as my browser plugin and try again. (BIGiMAC, ElCapitan)

  I checked and there is no plugin Silverlight available on the App Store.

  I looked at other options of the browser (in addition to Safari) that could work on my BIGiMAC when I want to select movies for our evening cinema Saturday at home. ALL seem to have 'questions' running on the Capitan.

  I also noticed that with my digital subscription to The New Yorker, videos to work anymore, but those of Goldman Sachs will not play. I think that should be part of the same show.

  Check on Amazon, it said something about a new HTML5 or what Viewer added to a browser.

  I'm not sure I want to have all added Windows/Microsoft products here for some reason any.

  I don't want to broadcast the entire video on my iMac, just look at the bands ads. Perhaps in the future it would be nice to watch on the iMac, however, since it's such a nice big screen and high resolution 5K, hit my quality socks.

  Then... What are my options?

  Post edited by: bj mobile al

  The plug-in can be obtained from the Silverlight Web site.

• 10.11.3 rely on 3rd party SSD?

  10.11.3 rely on 3rd party SSD?

  It seems that they have added support in Yosemite. But my question is in El Capitan you to activate for the 3rd party SSD or will it be automatic?

• Downgrade macOS Sierra El Capitan question

  Hi all

  earlier today, I upgraded my Mac mini (end 2012) to the latest version of macOS Sierra.

  After 1 hour of use, I realized that many of my plugins FCPX were not working.

  I contacted the developers, and they said does not update the plugins and they told me to go back to El Capitan.

  I decided to listen to them and try to downgrade my OS.

  I restarted the Mac and held down Cmd - R or something like that that took me to the disk utility screen.

  Then I went down to dinner, and when I returned 30 minutes later my Mac had entered the sleep mode for some reason any.

  I woke up the Mac and 40 seconds later the power went out for 5-10 minutes.

  After the blackout, I restarted my Mac that took me to a black screen with a flashing question mark folder.

  I followed some tutorials online (including how to enter get - and the recovery of internet mode), but after a while even restoration of the internet shows me the flashing question mark folder.

  I don't know what to do.

  And no - unfortunately I don't have a Time Machine backup.

  But I have a backup with all my most important files.

  Is it possible to force the Mac to reset itself or something like that?

  Help, please.

  Best regards

  Filip

  Mac mini (late 2012)

  I7

  16 GB OF RAM

  500 GB Samsung SSD of 840 - evo

  Graphics Intel HD 4000

  UPDATE: The globe stopped spinning (yet), but instead of showing me the flashing question mark folder, a text appears below the globe: 'apple.com/support-2002p'

  Simply connect the computer to your router using Ethernet and press CMD + ALT + R

• El Capitan 10.11.4(5 & 6) upgrade question

  I have an iMac 2010 (3.2 Ghz Intel Core i3, 4 GB 1333 Mhz DDR3, 1 TB HDD - 485 GB free) that runs quite happily El Capitan 10.11.3

  Unfortunately, trying to upgrade to 10.11.4 gave me the white screen of death white.  No hassle, time machine backup, don't try again, no question of devices attached, even.

  Waited for the release of 10.11.5 and 10.11.6 and have the same problem again.  Equipment of diagnosis showed no problems and has even downgrading to 10.11.3 and 10.11.2 and update go here has not solved the problem.

  Has anyone struck this problem and solved?

  Thank you very much!

  I suggest to download the Combo update and try it.

  Download OS X El Capitan 10.11.6 Combo Update - Apple Support

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• El Capitan 10.11.4 gel/Fans questions.

  Hello everyone, first I apologize in advance for my English because it is not my first language.

  I have a new MacBook Pro retina 13 "early 2015.

  For the last 5 months, I had the OSX El Capitan 11.10.3, who came out of the box with the computer. And it has always worked perfectly.
  In the last 5 months the mac never gave me any kind of questions!
  I mainly use the computer for listening music, browsing, chatting or writing texts (using base really anything heavy)

  U - unfortunately , I have to say, a couple of days ago on the App Store, I noticed a new version of update to OSX "11.10.4" and I decided to upgrade.
  Well, after a few hours, that I've upgraded to the new version my mac started having several issues.
  All first of all Fans. Without any reason after 1 or 2 hours after the upgrade (I was just looking the open web to 2 pages in safari, especially facebook and youtube)
  Fans have started to run really crazy and loud for 3 to 4 minutes... so strong that I thought that the computer was a blast and I closed all applications and waited for slow racing fans. The aluminium of the mac was not warm to the touch... Room temperature.
  This problem happened only the first day, I upgraded. But to be honest I sometimes feel the fans that sometimes short fast and loud without no reason.

  Last but not the least... GEL! Strangely also this problem showed the same day I upgraded my macbook pro to the 11.10.4 version and this happened to me about 5 times now! and it becomes a nightmare!
  When you use the mac computer just freeze the screen (mouse is stuck without the wheel is completely freeze) and after 4/5 seconds the screen is blocked as the work stoppage trackpad haptic vibration. I tried to let the mac like that for about 10 minutes, but nothing... only a hard reset can fix this...

  The last time that happened about an hour ago, and that's why I'm here...

  I already tried to start the computer with CMD + D to Apple diagnosis and check the hardware, but it is quite well show a message "No problems found" ADP000.

  Looking at the console I saw some strange messages, but as I am not a technician I don't know what kind of problem is...

  Anyone of you knows the problems on their macs?

  First of all: you ElCapitan, but have made typos in numbers: 10.11.3 was on it and 10.11.4 is now on it (I've made the same typo always).

  Your question may be due to Spotlight indexing, but I'm not sure.

  I propose to stop the mac and

  Then start while now the keys CMD + R: it starts slowly in the recovery Partition called. Choose "install OS" in the menu: it will install OSX on what is in the mac, it leaves your only user data. You must have a consistent internet connection, because the OS is downloaded again. So it takes time, be prepared for it. After that, the mac restarts and installs. Supposed to be all "fallen"bits"are corrected.