How integate OBPM with WCI (formerly BEA ALUI)

Similar Questions

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• How Siri works with a hotspot wifi phone from ATT without data?

  How Siri works with a hotspot wifi phone from ATT without data? I have the hotspot & it recognizes my iPhone5c, but Siri cannot find a connection when I use it. My phone service is now but only phone at & t imessage. No data, unpaid for the text. It works fine on my home WiFi & works but not the hotspot.

  Siri requires an Internet connection

  It will not work without one

• How the interface with my RND4000?

  I'm a replacement IT here. I have almost no notes to work from, and I've never used a SIN.

  How the interface with my RND4000? I tried to put the IP address in a web browser and you get "unable to connect".

  I think the NAS is supposed to be "hosted" on one of my servers. How to determine what is the server?

  Hello Helpdesk-Kerry,

  Then, it should be accessible. Perhaps, try another computer if after restarting it does not open yet?

  Kind regards

• How to communicate with the gsm using lab view

  Please, someone tell me about the following uncertainties:

  1 can anyone tell me about the GSM part in lab mode?

  2. how to communicate with the GSM using lab view?

  3. how to publish my data through GSM using lab view?

  4. how to use ipod to send data to laboratory?

  5. what a DAC suitable for ipod?

  6. how to install the lab for ipod DAC mode?

  without worrying

  FR. mohammad rehan

  rehan_the_great wrote:

  Can u please tell me the minimum requirement of computer (labtop) for the use of labview, like ram size, HARD drive, map chart etc...

  A simple search for "labview requirements" on this site would have given you the information you want.

  http://www.NI.com/LabVIEW/requirements/

• How to: scan with the HP Windows 8 software

  Learn how to analyze with your HP printer in Windows 8 by using the software provided with your printer.

  I hope that this video is informative and useful in your scanning process.

• M1217nfw - How to scan with the page feed

  I'm tired of scan one page at a time. Is is possible to scan multiple pages from the feeder to scan? I.m on an operating system Windows 8 using the application "scan to" (don't know what is the name of apps or version.

  TIA

  Hey TIA,.

  There is no much difference between Win7 and win 8 so please follow this document below:

  How to scan with HP software > how to scan a document of several pages in a single file > ADF

   

  (If you need software HP for your MFP HP LaserJet Pro M1217nfw then follow Note :))

  http://support.HP.com/us-en/document/c03584750

  Note: Please find the link to download the HP LaserJet full feature and driver software

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-80811-6&cc=us&DLC=en&LC=en&OS=4132&product=4075472&sw_lang=

• How to scan with an office jet 6500 has and a Mac OS 10.9.4?

  How to scan with an office jet 6500 has and a Mac OS 10.9.4?

  Hi midandco and welcome to the Forums of HP!

  I see that you are looking in the scanning options.  I would like to help.

  As there is no software available for Mac OS X 10.9 HP, you are advised to use the driver of digitization of the OS from Apple.  I'm including a document I would recommend using, title v10.9 OS X Mavericks: installing and using the printer on a Mac.  There is a section called "How to scan with Apple software update driver?"  This should help to address the issue.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• How to scan with my MG5620 for attachment to an e-mail message to send with my chrombit (wireless connect

  How to scan with my MG5620 for attachment to an e-mail message to send with my chrombit (wireless connect)? I guess I have to be able to drop on my Google Cloud someway.

  Thanks, I'll do the application of inkjet Canon a try.

• How to talk with microcontroller using RS232

  Hello

  I'm working on a project, which includes a power supply and the Commission of the PRINTED circuit board. This Board is composed of a microcontroller, with realys, power supply.

  My goal is to read current, volatge and reading output relay using the ports of mictocontroller.

  It's my first project, and I don't have any experience in how to communicate with microcontroller using LV (VISA). ?

  How to read the ports?

  I have to write the program for her?

  If I, then, how can I send this program to the LV program?

  I'm a little confused. Could you please help.

  Thank you

  So in your case, your best bet is uot start with programs for example LabVIEW which is by opening LabVIEW > help > find examples.  This must fill out a ton of examples.  Once in the example finder go to hardware input and output.  I was looking at so the two following folders: series and VISA.  Depending on how you communicate to your device you should be able to find an example of program that will let you use and on your way!

  The other source of assistance that I propose is the Nicom/community where many users publish different programs for different applications - you may be able to find an example that is suitable for your application.

  I hope that this help please let us know if you need more help!

• How to deal with analysis PC Performance & Stability Report

  Yesterday, when I just walked into my Office Xp, an error report in a program called... uh, PC Performance & Stability Report analysis, can possibly be, telling me to correct these errors have shown under its professional service.
  How to deal with him?
  Thank you for your advice it.

  Hello MeriClaybron,

  1. have you installed any show analyzing the program on your computer?

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Apparently, my memory is almost full - no idea how to deal with not having a novice such am - sd card

  Apparently, my memory is almost full - no idea how to deal with not having a novice such am - sd card

  Hi sixty.

  It can also be a good idea to begin to transfer the content from your phone to a PC/Mac to help reduce the storage room.

  It is a process usually easy, just plug the unit to a PC, on the phone screen select MTP mode when it appears.

  Once finished, you just have to access the phone's internal memory and transfer pictures/videos from the DCIM folder.

  Let us know if you need help in this kind of task.

• How to associate with 3 rd-party WEP AP (instead of WPA AP) with the universal client?

  the following example shows how to associate with a WAP to a Cisco router access point:

  ! http://www.Cisco.com/en/us/docs/routers/access/1800/wireless/configuration/guide/s37wep.html#wp1037774
  ! universal client configuration example for encryption of the ARS + TKIP, WPA - PSK:

  dot11 ssid test10
  open authentication
  authentication wpa key management
  WPA - psk ascii 7 11584B5643475D5B5C737B
  output

  interface Dot11Radio0/1/0
  DHCP IP address
  encryption ciphers aes - ccm mode
  SSID test10
  station-role nonroot
  output

  Hello

  If you need instead of WPA WEP... Here is the config...

  dot11 ssid test10
  open authentication
  output

  interface Dot11Radio0/1/0
  DHCP IP address
  mandatory encryption wep mode
  1 size 40-bit encryption key
  SSID test10
  station-role nonroot
  output

  Let me know if that answers your question and please do not forget to note the useful messages!

  Concerning

  Surendra

• DeskJet 2515 HOW TO install with windows 8

  DeskJet 2515 HOW TO install with windows 8

  Hello

  Download and install the software below, remember to keep the cable plug USB disconnected until installation invites you to the to:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109467-1&cc=us&DLC=en&LC=en&OS=4131&product=5157453&sw_lang=

  Shlomi

• How to deal with operating system windows 8.1 and apps on usb device

  Hi, I have a laptop Lenovo G505. Windows 8 64-bit was preinstalled in it. Later, I upgraded to 8.1. Laptop is almost 9 months and still under warranty. Since a few days, built Lenovo solution Center alert this analysis of hardware detected failures in one or more devices. On suggestion of Lenovo, I ran hdtune pro app in my machine and it also detected 3 hard drive errors. As my machine is under warranty, Lenovo is ready to replace my hard drive with a new one. But they say that it is the responsibility of the customer to return the windows 8.1 operating system and install in the new drive and their liability is limited to the replacement of the hard disk only. I am not computer savvy and I request concerned to guide me how to deal with operating system windows 8.1 on external media like USB, DVD, and install in the new drive. I also installed a number of apps and paid games. Therefore, I would like to resume these games also files so that I need not buy again. Assistance in this regard is required.

  Hello Mohan,

  Thanks for posting your query in Microsoft Community Forum.

  I can of course understand the situation and will be happy to help with your query.

  Let me ask you;

  • You have the key product for Windows 8 or 8.1?

  You can create an installation media (DVD/USB) for Windows 8.1 and re-install when you want. However, in order to create an installation media for Windows 8.1, you need the product key. If you don't have the product key for Windows 8.1, you can not create installation media.

  You can create the installation media for Windows 8 by using the product key Windows 8 If you have. In this case, install you Windows 8 first and then go to Windows 8.1 through store.

  As far as your paid apps (purchased by store) are concerned, you should be able to install them as soon as you sign in with the same Microsoft Account where apps were purchased.

  You can see the steps indicated by Ronnie Vernon replied on 24 December2013, re - install paid apps.

  You can follow the steps below to create installation media.

  1. Run the program Windows 8.1 configuration or installation of Windows 8 (depending on the availability of the product key for the specific operating system.

  2. When you are prompted to run or save the file, choose run

  3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1 (or Windows 8).

  4. When you are prompted to install Windows 8.1 (or Windows 8), select install by creating media and then click Next.

  5. Select the type of media you want to use: either a Flash DRIVE or a DVD.

  To create a USB flash drive

  1. Click on the USB flash drive.

  2. Plug the USB key into a USB port on your PC.

  3. When you are prompted, select the USB key that you want to use, and then click Next.

     If you have files on the USB flash drive, it will remove them.

  To create a DVD

  1. Click on the ISO file , and then select the location where to save the ISO file.

  2. Insert a blank recordable DVD into your DVD drive.

  3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

  Note: Ensure that the USB or DVD key that you use has nothing else stored on it and has a sufficient free space to download the Windows 8.1 Installer: about 2.3 GB for the 64-bit version.

  You can also read the article below to create a USB stick recovery.

  Create a recovery USB disk

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.