How is my husband access my desktop pc... remote assistance request is turned OFF... but it is still able to get.
I don't know the details... that's the problem. I don't know how is able to access my pc... Since remote assist application it turned off. He has recently set up a network of some sort and was dismantling it without being on this pc... Suggestions people? I would like answers.
There are many types of software of remote control that it can be used. Go into Add/Remove programs and see if there is something that you do not install. Do not uninstall randomly, looking first. In addition, check the properties of your taskbar. Some remote control software have task bar icons that he may have hidden. Check your start up for software by typing "msconfig" in run and go to the Startup tab. Take a look at your services, too, however, it can be difficult to find something. You can check the services by typing "services.msc" in the race.
Tags: Windows
Similar Questions
-
Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.
When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.
I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.
It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop
Any solution please?
Thank you
Hello
I'll get you the link and restore your computer to a previous working state.
http://support.Microsoft.com/kb/949358/en-us
Please reply with the status.
-
Defender is turned off, but does not give me access to it 2 turn on power
original title: windows Defender
These days have a lot of problems with my laptop. Problems with starting. I need to access windows defender to modify startup programs. It is said that Defender is turned off, but does not give me access to it 2 turn it on. In addition, different problems with different users and accounts by the office put in place, it looks like all my users are running different versions of windows, so I don't know where to start with all the problems. Security sounded like a good place 2 start, so I guess I'll start by Defender problems. (I have recently downloaded the free security essentials, safety signs so all green lights).
Hello
You might have developed some questions so I would make these your
Admin account. These are in addition to checking your startup
programs.Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
-
The box says: we have strengthened our add-on of Coupons that will improve your browsing experience by posting coupons that you shop and browse your favorite sites on the web. See our privacy policy and Conditions.
Disable these improvements NEAR
Turn off does nothing, but CLOSE it closes
Hi vbaio.
Looks like the voucher program may be malicious. Here is a Support article on how to identify and treat by malware:
Fix Firefox problems caused by malicious software
I hope that helps!
-
I get a window of surf canyon to appear on my desktop. I checked in my control panel and features program and it does not appear there. I checked in firefox, tools, add ons and, it seems, but it is disabled. There is no option to "remove" as there is for other add ons. And, even if it presents as being disabled, the window keeps popping up. How can I get rid of this?
According to a screen shot I've seen online, when you are in the Control Panel, uninstall a program, you are looking for is called Fast Search. It might be easier to click on the column heading "installed on" to bring the most recent infections, I mean additions, upward. I hope that here uninstallation will remove the Firefox and IE as well.
-
1 desktop PC
2 Windows 8.1
3 adobe CS6
4. I tried CC programs
5. no isolated, all the other programs CC
6 edge CC will NOT uninstall
7 adobe CS6 programs will not work!
1 cc programs do not prevent cs6 work programmes.
2. to uninstall a program that the uninstaller does not work, reinstall the program to restore the uninstall program.
-
HP Pavilion p6610f desktop win 8 64 bit since my hard drive has failed and a friend of a friend installed another hard drive and insisted on the fact that I install Win 8 instead of 7, (I hate Win 8), there is a click inside the tower and I also hear something that seems to hold the bike to the top then then down every few seconds, the ticking is almost every second. I checked the power that I knew how. Configuration and System Device Manager and it says disk hard does not work properly and is no need for an updated driver. But everything is so slow and things don't work a lot of the time, the internet will not load or merely far sometimes but convenience store network says it is connected and functional. I sometimes can't features to not work the control panel. I tried the diagnosis of memory in the administration settings, but it wouldn't work. Before I could get my Win 7 backup files on Win 8, PC showed that I had 220 GB of 232 GB memory left possible on the replacement hard drive. I have 4 GB of Ram on a 16 possible and I thought shoud get more. I was just wondering can I have the back off the coast of the Tower during its execution so that I can see that actually the sounds before investing in another hard drive and memory cards? I'm so unhappy with my computer that I love even more to use it and I used to stay on 10 to 16 hours a day. I don't have microsoft nhave word more and I miss the fonts that he used and for a reason that these fonts are missing off the coast of my e-mail program when they were there before the failure and the loss of MS Word IE fonts. Sorry so long winded. Taylor
Taylor,
No long-term, just percise. Liked it.
(1) you can observe with the box to open, but get a grounding strap. (for example).
(2) If you want to WIN 7 64 bit, see here
(3) memory is available here (2 PCs 4 GB)
(4) MS Office Starter 2010 is still free.
-
How can I activate the creative programs cloud to my new computer?
Hi Amy,
Yes, you can activate the application on your new machine.
Please refer to the help documents below to download the application Adobe CC:
Download, install, update or uninstall applications
Once downloaded the CC app, just sign in and activate the license.
Kind regards
Sheena
-
I had a problem with my AcerPower F2 Windows XP Professional. You will work and it stops just and restart on it. What could be causing it to do this? A virus? I use this computer a lot for school I hope its something fixable. He has had this problem for at least two days that I am aware. Not sure when its going to do this again, its really hard to get anything done when you don't know how much time you have. This will be repeated this unexpectedly, without warning. It will work for awhile then do it again, back and fourth. I can't put up with this, I hope that someone out there has an idea. Thanks much :-)
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
How to install CS4 on a new computer, if it does not turn off on a broken computer?
My premium CS4 was installed in my computer that was suddenly become malfunction! CS4 license took place cause I didn't have a chance to turn it off. How can I install on my new computer?
Contact customer service by chat or phone.
-
Cannot move to the start page of Mozilla. Any site or search I run, I get a message that Mozilla can not establish a connection with the server.
See this support article - difficulty of problems connecting to websites after Firefox update
-
How can I stop my tabs app to disappear whenever I have turn off my computer?
My app tabs disappear each time I have to restart or shut down my computer in Mac OS X. I don't have this problem in windows. I looked through the support of countless times, and no, my problem isn't that I "clear history" checked in my preferences.
Just a side note, I was really excited for Firefox 4. Seemed really cool and was very fast. This tab app was my favorite new feature, and I am very disappointed that it does not work as it should. And until this problem is fixed in Mozilla, I'm going back to Google Chrome.
App tabs and groups of tabs (Panorama) are stored in session data in the sessionstore.js file in the Firefox profile folder
There may be a problem with the sessionstore.js and sessionstore.bak files in the profile folder
Delete sessionstore.js and sessionstore.bak in the profile folder
If you see files sessionstore-# .js with a number in the left part of the name as sessionstore - 1.js then delete those as well.
You will have to redo the App Tabs and tab groups after delete sessionstore.js.
See:
-
original title: can't see the computer on wireless internet!
I hope that's not too much detail, but I would like that the sequence of events to be clear...
I have a Dell desktop computer that's probably six or seven years now. It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software. It works beautifully.
Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities. I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver. No problems.
The Dell laptop is dead and the DLink receiver has not been used for a long time. Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard. Still no problem.
I got a new ASUS laptop, I also linked using the Windows Wizard. STILL no problem.
Now, here's the problem comes. I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box. Then I can connect correctly, but I don't see this computer on my wireless network. Bad luck... because I want to be able to access share files. When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.
So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows? I uninstalled the software of DLink, but it seems to have no effect at all.
BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7. I can see all the computers on the network with the exception of the original Dell desktop computer wireless.
Any help would be appreciated!
Hi Joe and DonnaLoth,
The network will have to be changed to allow the computer Windows XP join a workgroup.
You can also read the following article.
Networking of computers running different versions of Windows
-
How to prevent my monitor turn off?
I know this question has been asked repeatedly, but often the proposals remained without answers of the user.
Therefore, accept my apologies for asking it again.
Windows 7 x 64 is running.
All goes well, until all of a sudden the screen turns off. There's - no - way to get on again.
Mouse movements, altr-ctrl-del, nothing.
PowerPlan is set to 'High Performance'
Turn off the display: never
Put the computer to sleep: never
High performance - requires a password on the reactivation of the establishment: No.
Hard drive - turn off hard disk after - setting: never
Internet Explorer - JavaScript Timer Frequency - setting: maximum performance
Wallpaper settings - slide show - setting: available
The wireless adapter settings - setting of the energy saving Mode: maximum performance
Sleep :
-Sleep - after setting: never
-Allow hybrid sleep - setting: Off
-Corner layout - setting: never
-Allow the wake timers - adjustment: activate
Settings of the USB - USB selective suspend setting - setting; Activated
Cover and the power button
-Power button action - parameter: closed
-Sleep button action - parameter: sleep
PCI Express - links power state management - setting: Off
Processor power management
-Minimum processor state - setting: 100%
-Political cooling system - framework: assets
-Maximum processor State - setting: 100%
Display - the display off-setting: never
Multimedia settings
-For sharing media - setting: avoid idling to sleep
-For video playback - setting: optimize video qualityWindows 7 x 64
The drivers are all uptodate
I need to stop the pc and reboot.
Any suggestions?
Meanwhile, I'm afraid I don't know what the use is for "Allow wake timers" and "USB selective suspend setting '.
What are they supposed to manage and recommended settings.
Thank you
-
=
=
Hi Mike,.
Thanks for posting your request.
We will try these steps and check.
Step 1: Turn off the screen saver by selecting the screen saver 'None '. And check if you have a similar question.
If the problem persists, please turn off the sleep in the BIOS. To check the BIOS settings, please consult the user manual or contact the manufacturer of the motherboard.
Step 2: Perform the check and the boot if the problem persists. It will start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Please see this link which has the steps showing how to perform the clean boot:
(1) perform the clean boot (check the link to perform the clean boot)
(2) enable half the services
(3) determine whether the problem returns
(4) enable half of the startup items
(5) determine if the problem returns
(6) repeat the steps above until you find out which program or service is causing the issue
After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.
Check out the link where the user has had a similar problem below:
I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
Windows 7 remote assistance displays garbled desktop
I'm trying to connect to the asus laptop of my mother to help her, but each time, remote assistance is used, the his office appears in monochrome color and is coded/biased. This is not a problem of the internet, because the connection is through our internet and home network is not used to establish the connection. Between the two laptops Remote Desktop works fine, not display problems what so ever. so I don't think that it is a configuration issue with the router or other system. Unfortunately we have only two systems win7 (my laptop and my mums), so test it with a third windows 7 PC is not possible. I'll try to connect using my XP Pro desktop computer, but I expect that it does not at all due to differences in OS version. my moms laptop has some kind of custom AMD/ATI discrete video card that is not able to use AMD drivers, so im not able to upgrade to the latest version of the drivers on his cell phone. My laptop has, however, the last driver from NVidia (314.22) package because it is the video card.
Yet once again, this problem is NOT with Remote Desktop, which works very well between our two PC.
This is NOT a connection problem. I am able to connect to his PC, very well.
The question is when his office is shown through the Windows remote assistance program.
I have already run all the troubleshooters there, who have found NOTHING of EVIL.
the remote assistance connection is made using easy connect through our home network.
any suggestions on the internet do not work as the connection to the local network traffic never leaves
My laptop: Toshiba Satellite P500-ST6844
Windows 7 Ultimate x 64
NVidia GT 330 M 1 GB Gddr3
I7-Q720M (1st generation)
8Gb
c:\ Hitachi 500 GB 7200 RPM partitions: 3 [System], [TI105417W0F], [HDDRECOVERY]
e:\ Hitachi 500 GB 7200 RPM partitions: 1 [TI105417W0F-2]
My mother's laptop: Asus K52 - JT
Windows 7 Ultimate x 64
ATI Radeon HD 6370M 1 GB DDR3
I7 (1st generation)
8Gb
c:\ Scores of 750 GB Seagate 5400 RPM: 1 [USER]
Apparently, Microsoft is aware of this error and has released a software fix. the link is below.
My only question is can I install this fix on my mums laptop, my laptop, or both?
Remote assistance does not display a desktop computer that has a resolution of 1366 x 768 correctly in Windows 7
I tried this fix and it works very well for my Windows 7 Home Edition basic with a resolution of 1366 x 768 as the server end (from where the remote assistance request is created). Now the display of remote assistance is more blurred.
Maybe you are looking for
-
Cannot open Subvi by double-clicking
It's just irritating the heck out of me. I have a Subvi, which doesn't seem to work because I think that it should. I don't know if it's my problem or the Subvi. But this isn't what bothers me. If I double-click the icon of Subvi (on the rear panel
-
Microsoft has mechanical keyboard in-store?
I'm from the India, make MSFT has mechanical keyboards in store?
-
How can I turn on switch radio for my wireless card
-
I can't delete my profile photo (s) of the e-mail application Outlook in Windows8.
I can't delete my profile photo (s) of the e-mail application Outlook in Windows8. I managed to remove from the desktop version, but there is a profile picture for both of my alias in the Mail application. One of them is at least five years, I do not
-
Clarification of the SQL query in 2 day + Guide APEX
I worked through the Oracle Database Express Edition 2 day + Application Express Developer's Guide, and try to decipher the SQL query in Chapter 4 (building your app).The code is:SELECT d.DEPARTMENT_ID,d.DEPARTMENT_NAME,(select count (*) from oehr_em