How 'remove all' Inbox of messages with a single click

Similar Questions

• numbers WWPN want list of all ESX 3.5, with a single click

  In my VMware environment, I am managing around 250 + ESX 3.5 servers. Now, I'm in the work of documentation for all the ESX servers. I want to list the WWPN of all 250 + ESX servers with its corresponding host name.

  It would be more appreciated if anyone make my work easier (Expecting a click).

  Thank you

  GaneshNetworks

  Hi Ganesh,

  I know you're new to scripting, but I think that the document I linked to getWWPN.pl gives good enough details on what is required to use the script and the requirements, it is meaningless for me to repeat what is already there.

  1. you pouvez run on vCenter Server if you wish, the requirement is that you have the installed vCLI. You certainly can not execute from the ESX host directly. The recommended approach is to install the Urinl (comes in both Windows & Linux) on another management system which can communicate to your vCenter Server network.

  2. here is the list of the hosts that is attached to your vCenter Server server, you must use the display name that is used when you connect your host ESX or ESXi, vCenter, and generally this should be the FULL domain name

  3 RCLI no longer exists, it was the former name of the VI 3.5 days. From vSphere, the newly baptized name is vCLI. The vCLI uses the vSphere SDK for Perl which is bindings for Perl vSphere SDK. The vCLI is really just a small set of Perl scripts that emulate the good known esxcfg-* commands found in the classic ESX Service Console, these were mainly created to remotely manage ESXi hosts but can be used to manage/configure ESX. They are nicknamed vCLI scripts or utilities.

  I hope this answers your questions and I really recommend you take a look at the document on how to run this example.

  For more information on vCLI and vSphere SDK for Perl, take a look at these articles on my blog:

  http://www.virtuallyghetto.com/p/VMware-VCLI-RCLI.html

  http://www.virtuallyghetto.com/p/VMware-vSphere-SDK-for-Perl-VI-Perl.html

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP4-DCA

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Remove all the missing links with frames

  How can I make a script to remove all the missing links with frames in indesign?

  var doc = app.activeDocument;
  Links var = doc.links;

  for (var i = links.length - 1; i > = 0; i--) {}
  If (links [i] .status == LinkStatus.LINK_MISSING) {}
  try {}
  Links [i] .parent. Remove();
  var image = link.parent;
  var frame = image.parent;
  Frame.Remove ();
  counter ++;

  }
  {} catch (err)
  $.writeln (i + "-" + err);
  }
  }
  }

  I have try this script, but still remain a framework, what is wrong with that?

  It works for me:

  var link, image, frame,
  doc = app.activeDocument,
  links = doc.links,
  counter = 0;
  
  for (var i = links.length-1; i >= 0; i--) {
      if (links[i].status == LinkStatus.LINK_MISSING) {
          try {
              link = links[i];
              image = link.parent;
              frame = image.parent;
              frame.remove();
              counter++;
          }
          catch (err) {
              $.writeln(i + " - " + err);
          }
      }
  }
  

• How to select all text in a table with a single click cell?

  How to select all text in a table with a single click cell? I use TextField.selectAll () when you implement a table cell factory. But when I select a line with a single click, then a click on a table cell again: see the result image

  The text in the table cell is not all selected. What I simply selects all the text in a table cell when there is a click on it. How to realize that? Thank you

  Thanks for help ~.

• Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Question
  Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Hi Jlhillhouse,

  It is difficult to solve the problems of the computer without knowing all the details. You should look at the link I sent you and especially to Firefox is slow - how to make it faster. I don't know any known issue as you describe, it's probably a very good bet for a response.

• TextEdit - document open again with a single click

  Is there a way to open a new document in Textedit, with a single click? For the moment, by clicking Textedit launches another window from there, I click on 'new Document '.

  Thank you.

  This is how it works if you have iCloud drive lit for than TextEdit. You can go to the Apple menu > System Preferences > iCloud > iCloud Drive - Options and remove the check mark in front of TextEdit it. After that open TextEdit will open directly to a new document. You will still be able to save a document to iCloud by car if you want.

• Tool to highlight in different colors on a base with a single click

  Concerns Acrobat Pro ms in the latest version on a Mac. I'm looking for a way to have the highlight tool (sorry, only a German version - it's the tool with the yellow pen, which allows to highlight the words) in the comment section available in various colors on a base with a single click. Of course one can with the colors in the Panel property of the highlighting itself, but it's pretty heavy. It is possible to put the tool in a toolbar customized, yet, the color of a single instance of the switching tool will change it in all cases. Any suggestions?

  Thanks, Alex

  Have you ever used the Properies toolbar? Cmd + E.

  It is MUCH faster than opening the properties of comment every time. Sometimes, the Properties Panel takes 5 + seconds to open.

  The property bar you access to virtually all the properties we needed. In addition, it is contextual. Read the article below on how to use it. It works the same as is done at the time I wrote this article... only now he can be steeped. Document of Geek: how to change the font properties in a PDF Sticky Note

  

• Closing the browser with a single click from shape

  Hi all
  
  U please help me anyone how close the browser with a single click by pressing exit or close the cross button.
  
  
  Arif

  It's a path of the virtual directory of \tools\web90\html

  in the Web server environment, you don't play with fix paths like c:\temp instead, we define the path to the application as a virtual directory server...

  Replace as I mentioned in my previous post

• Multiple tasks with a single click

  My job is to manually change several lines to a different graphic style and before this line to another layer.  As it is now, I change the graphic styles, choosing Select < even < fill & stroke and before moving the lines to the appropriate layer.  I am wanting to know if there is a way to change the graphic style and move the line to the other layer with a single click.  I'm ignorant when it comes to scripts, but I was wondering if there are scripts that would be subject to this function.

  You must explain in detail the installation program. Otherwise, the people making suggestions are just guessing. Here is my suggestion based on what little information you have provided:

  You don't need a script for this. You can do it with a set of very simple Actions. Example:

  Suppose that your recurring task requires three layers, named Red, green and blue. On each layer, all objects need to have the same graphic Style applied.

  1. new document. Create three layers. Name them, red, green and blue.

  2 define three graphic Styles. Name them, red, green and blue.

  3. draw an object (any object, a square, a line, no matter). Send it to the red channel. In the attributes Palette, type 'Red' in the Note field. (This effectively 'names' the 'Red' object.)

  4 draw an object, send it to the green channel. Type 'Green' in his Note.

  5 draw an object. Send it to the blue layer. In its Note of type 'blue '.

  6 draw an object on the Red layer. Select it.

  7 actions Palette: new Action. Name of the Action 'red '. Define red colour. Start recording:

  7.1 Edition > cut

  7.2 Edition > paste in front

  7.3 apply red graphic Style

  7.4 stop recording.

  Range of actions 8: select the stage of the Cup. In the menu drop-down select Select an object... In the dialog box, enter "red". OK, the dialog box. The Action should have now a new stage set the selection listed after the stage of the Cup.

  9 flyout Palette menu actions: the Mode button.

  You now have a red named Action which appears as a red button in the actions palette. Select an object. Click on the button. The object is moved to the Red layer and becomes red graphic style.

  10 turn off the Mode button. Duplicate Action. Double-click the duplicate. Change its name to green and its green color. Change its step set the selection to select the object named green. Replace its step of graphic Style with a stage that applies the Green graphic Style.

  11. Similarly, duplicate and edit one of the two Actions to create a blue Action. Put the actions in button Mode palette.

  Now you can select any number of items and then move them to the red, green or blue layer and apply the graphic Style suitable in one click.

  Now come back and reveal the specifics of your situation that makes all this work moot.

  JET

• I can't fix my mouse to use the option with a single click in windows 8. The two click works fine, but I prefer the one click option

  With Windows Vista and Windows 7, I put the mouse to use the option with a single click to open files and programs desktop.  I can't find this option in Windows 8.

  Hello
   
  Thanks for the post about Microsoft Community.
   
  I understand that you don't want to use the simple click instead of double click of the mouse that you used in Windows Vista and 7.
   
  I would ask you to please follow the steps below to activate the option just click on the button of the mouse in Windows 8.
   
  un) Please move the cursor to the bottom right and click on the search box, which is the first option in this Panel.
   
  b) in the search box, type Control Panel, and then click Control Panel.
   
  c) after opening the Control Panel, you will see many programs such as the system, network and security, Internet, hardware and sound, and other programs. Click "appearance and personalization".
   
  d) now click on the folder option to open it.
   
  e) now you will see many options in the folder option. Now, click single-click to open an item (point to select).
   
  f) now click on apply and ok to turn this feature on your computer.
   
  I hope your problem is solved now. Please feel free to write back if the problem still persists.

• Select the options for ALL but some in OBIEE prompt with a single click

  Hello guys,.

  I have the below requirement

  I have a prompt that displays the payment terms.

  On the result - 3 payment terms are the terms of payment we and the rest are Global.

  A user will select these 3 conditions of payment of the United States or the reset of the (Global) payment terms, but not all.

  Y at - it somehow I can create an option that selects all terms of payment with one click (as the option all columns)

  also, I'm trying to use all of the columns, which is to select all the columns including US and global, but once the user selects all the column option - the user is not able to selectively disable certain values.

  Is there a work around for this?

  Please let me know because this would be a great help for me.

  Thank you

  Why don't make you a second guest of the column where you add the CASE WHEN to produce the 2 types of terms (US & Global)?

  Then using the "limited by" you auto-filtre the actual list of terms of payment based on the first selection and is to meet your requirement to select all of the USA or Global all with just 1 click.

  The user you want to select just 1 term given? Just ignore the first field of the prompt with the groups and directly select the one required in the second field.

• How can I test configuration MP with a single machine?

  I am trying to set up a domain using model MP, but I only have a single machine available. If I change just SHM MP it does not. He warns that the NLSADDR is not set and when I print servers all of them but the DBBL do not exist (the symbol is: (-)). I tried to use the same machine with 2 different LMIDs but it gives me an error when executing tmloadcf.

  What can I do to test this configuration? I want to check the behavior of LDBAL and many others with the MP model.

  To configure MP with a single machine, set the model MP and add network section:

  * NETWORK

  Site1 NADDR = "//localhost:3000" NLSADDR = "//localhost:3001".

  Then, start the tlisten process to allow the DBBL communicate with the BBL in the single machine and start the application:

  TUXDIR/bin/tlisten - l '//localhost:3001 '.

  tmboot-y

  Start the application. To inspect the settings in the admin console use this:

  tmadmin

  > default m all the

  After that, you should see all the information on the machine SITE1.

• Removal of MSQL 2 tables with a single button

  As I was able to add data from two tables mysql with a single button, I guess I should be able to delete the two entries in a similar way, but I can't seem to get there. The code is written in large part by DW and I have only the level minimum idea of the meaning of the php, so please be patient in no explanation as to where I'm wrong!
  At the present time, to the chk_sixmonth of the table entry is removed, but at table cel_contents incorrect records are deleted.
  The corresponding code is, I think;
  If ((isset($_POST['ck_pk'])) & & ($_POST ['ck_pk']! = "") & & (isset($_POST['gone']))) {}
  $deleteSQL = sprintf ("DELETE FROM chk_sixmonth WHERE ck_pk is %s",
  GetSQLValueString ($_POST ['ck_pk'], "int"));
  
  @mysql_select_db ($database_tormented3, $tormented3);
  $Result1 = mysql_query ($deleteSQL, $tormented3) or die (mysql_error ());
  
  $deleteGoTo = "chk_insert.php";
  If (isset {}
  $deleteGoTo. = (strpos ($deleteGoTo, '?'))? « & » : « ? » ;
  $deleteGoTo. = $_SERVER ['QUERY_STRING'];
  }
  header (sprintf ("location: %s", $deleteGoTo));
  }
  
  If ((isset($_POST['cel_pk'])) & & ($_POST ['cel_pk']! = "") & & (isset($_POST['gone']))) {}
  $deleteSQL = sprintf ("DELETE FROM cel_contents WHERE cel_pk is %s",
  GetSQLValueString ($_POST ['cel_pk'], "int"));
  
  @mysql_select_db ($database_tormented3, $tormented3);
  $Result1 = mysql_query ($deleteSQL, $tormented3) or die (mysql_error ());
  
  $deleteGoTo = "chk_insert.php";
  If (isset {}
  $deleteGoTo. = (strpos ($deleteGoTo, '?'))? « & » : « ? » ;
  $deleteGoTo. = $_SERVER ['QUERY_STRING'];
  }
  header (sprintf ("location: %s", $deleteGoTo));
  }
  
  $colname_rstSix = "1";
  If (isset($_GET['scrap'])) {}
  $colname_rstSix = (get_magic_quotes_gpc())? $_GET ["scrap"]: addslashes($_GET['scrap']);
  }
  @mysql_select_db ($database_tormented3, $tormented3);
  $query_rstSix = sprintf ("SELECT * FROM chk_sixmonth WHERE ck_pk = %s", $colname_rstSix);
  $rstSix = mysql_query ($query_rstSix, $tormented3) or die (mysql_error ());
  $row_rstSix = mysql_fetch_assoc ($rstSix);
  $totalRows_rstSix = mysql_num_rows ($rstSix);
  
  $colname_rstCont = "1";
  If (isset($_GET['scrap2'])) {}
  $colname_rstCont = (get_magic_quotes_gpc())? $_GET ['scrap2']: addslashes($_GET['scrap2']);
  }
  @mysql_select_db ($database_tormented3, $tormented3);
  $query_rstCont = sprintf ("SELECT * FROM cel_contents WHERE cel_pk = %s", $colname_rstCont);
  $rstCont = mysql_query ($query_rstCont, $tormented3) or die (mysql_error ());
  $row_rstCont = mysql_fetch_assoc ($rstCont);
  $totalRows_rstCont = mysql_num_rows ($rstCont);
  ? >
  <! DOCTYPE etc...
  
  < form action = "" method = "post" name = "scrap" id = "scrap" > "
  < input name = "gone" type = "checkbox" id = "gone" value = "gone" / >
  < input type = "submit" name = "Submit" value = "Remove" / >
  
  < input name = "ck_pk" type = "hidden" id = "ck_pk" value = "<?" PHP echo $row_rstSix ["ck_pk"];? ">" / >
  < input name = "cel_pk" type = "hidden" id = "cel_pk" value = "<?" PHP echo $row_rstCont ["cel_pk"];? ">" / >
  < / make >
  Thanks for any help

  Problem has now well sorted.

• I want to respond to every email in my box with a single click? Please explain?

  I answer all my e-mail with the click less, please?

  Click the message to select it, then click on answer.  That's two clicks.  You can't do it in much less than that.

  Steve

• How to permanently remove all search engines with a single click from Firefox 36.0.1 except Startpage?

  Whenever I start a session in Firefox, I have to remove google search engine, because he re seems over and over and over again, no matter what I do. Is there a permanent fix to just disappear for ever from my browser?
  Thanks in advance

  Do you mean that Google appears in the search bar, or in the search box on the home page of Firefox integrated? Or do you mean that Google buy your homepage?

  If Google replaces your homepage to start even if you have changed it in your previous session, there are a variety of possible reasons. This article describes some of them: How to fix preferences that will not save.

  Another reason is as Advanced SystemCare or commercial software with a homepage protection function: it will cancel changes to browser settings to protect you from unwanted changes. But he doesn't know who is wanted and those that are not, then it undoes any changes. If you like this software, disable this feature, at least until you get Firefox works the way you want.