How separate and rotate the pieces of an object to create a GIF file in after affects?

Similar Questions

• How can I keep my visible background layer when you create a GIF file in Adobe Photoshop elements 11?

  I am trying to create a GIF in Adobe Photoshop elements 11.  To give you the objective of the final result - I am trying to create the illusion of dog legs walking on a yellow background.  Each image individual leg is a separate layer on the yellow background.  I want my background layer to ALWAYS show during the animation.  In ADDITION, I want each paw image to stay on the yellow background that he hosts (if possible).  Here are the steps that I took:

  1. I have my background layer (yellow background)
  2. I layered all the other images on the top (8 paw print images)
  3. I placed these images where I want them on the background layer

  I know that to create a GIF file, I go to 'Save the image for the web', select GIF and click "animate".  The problem is when I preview the animation, it's a single image at a time, instead of the overlay and keeping them on the screen as the animation progresses.

  At the very least, I want the yellow background to show during the animation.  I can live with that if the paw prints don't stay on ;-)

  I would appreciate any insight/help!  Thank you!

  I think that you need to merge each layer with your yellow background, and then try again the gif.

  In other words, put the yellow background under each layer and merge the top layer with the yellow background.

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• How would you make the superclass of an object at run time?

  How would you make the superclass of an object at run time? Is it possible

  This is probably:

  Description... @type

  However, you can also try getQualifiedClassName and getQualifiedSuperclassName

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  Have you looked at the site of Canon?

• Re: Satellite P750 - need directions how access and replace the Wi - Fi adapter

  I have searched all over the web to find a guide on how to replace the wifi card, or at least which screws to remove before you lift the keyboard. I guess that the wifi card is sitting under the keyboard and is accessible by removing the keyboard.

  Case is I want to use widi and so I need to replace the card atheros with a processor intel, a.

  I'll probably end up that even with instructions. So, any help would be greatly appreciated in order to avoid any damage to this magnificent machine.

  More I could use advice on wiring if I want to use a card of two antennas and is the interchangeable card as to existing wiring. I don't know maybe the antenneas is in support of the Bluetooth feature. It will go just to fix the antennas on the new map 'only' wifi in their current configuration.

  Best,
  Jesper

  Hello

  This Satellite model is new and I assume that the warranty is still valid. Is this correct?
  I guess you know that this action will void the warranty.

  Maintenance manual is not a public document; Therefore, you won't be able to find it for download.
  > I'll probably end up that even with instructions.
  This very bad idea of s. Without instructions step by step, you can damage something, break a few small plastic stand or damage some duct connection. Problem is that these small plastic parts cannot be ordered anywhere.

  I put t know if you have verified compatibility with cards with the hardware platform of s notebook, but maybe you should contact the nearest Toshiba service and pick up some information before you do anything.

• Satellite P10: How unzippe and install the drivers

  Dear friends

  a the can advise me.
  I load updates but I've never used winzip before but my xp Wizard did it for me.

  Have put them in a folder, I have no idea how to install them.

  I have installed many programs before but not of record

  Thanks colin

  Hi colin

  It's very simple. You must first install the WinZip software. You can also use the WinRAR.
  The WinRAR does the same job as Winzip but in my view it of much better and easier.

  So as said install WinRAR, download driver Toshiba and unzip the folder of the driver!
  Then, you will get a new folder with the driver inside.

  Access the new created folder and complete the driver installation.

• How do I get the name of a duplicated or created control and add a reminder

  Hi all

  According to the number of entry points I need, I duplicate a digital or an input string to the DuplicateCtrl function. My question is, how do I get the name and id of the control that has been created, and how can I assign a callback to it? Alternatively, it would be better to create a fresh ctrl instead of duplicate?

  Thanks in advance!

  Hi TurboMetrologist,

  Why are you trying to get the name of constant control? Remember that you cannot use this name to address control; control names are in fact simply the macros in the file associated with the UIR, include in other words, the preprocessed compiler code and everywhere where the names of PANEL_CONTROL replaces the digital value as parameters to functions (and therefore 'control' parameter is an int value and not a char *)

  That's why NewCtrl () or DuplicateCtrl () functions return a control ID: this is the handle to the new object, the only way to handle it. You will need to store this handle in a nonvolatile memory so that you can access durng life program.

  In addition, there are other ways to assign a meaning to a control to pass on the name of constant control. For example, you can use the callbackData parameter to differentiate the different copies of a control.

  Let me explain with an example. You said that you need several entries (dynamically created that you don't know in advance how many of them use); a solution could be:

  • Design a master copy of a control in the IUR Editor, where it is easy to customize; also assign a callback function, if it must be common to all copies of the control
  • Assign a value to this control callbackData, programmatically for example SetCtrlAttribute (...,..., ATTR_CALLBACK_DATA, (void *) 1);
  • Duplicate the control, and then assign a different callbackData
    for (i = 2; I have< 5;="" i++)="">
    handle = DuplicateCtrl (...);
    SetCtrlAttribute (..., handle, ATTR_CALLBACK_DATA, (void *) I);
    }

  By operating this way, whenever the reminder of control is triggered by any control, it will receive the callbackData assigned, and you will be able to differentiate your code with a simple switch:

  switch (callbackData (int)) {}

  case 1: / / the master controls

  break;

  case 2: / / first dual control

  break;

  }

• I only have one user on my computer and it is a standard user, how do I use the administrative user if I can't access my files

  I only have one user on my computer and it is a standard user, how do I change my administrative account if I can't access my files or access my account

  Hello

  1. what happened to your administrator account?

  2. you remember to make changes to the computer recently?

  You will not be able to change your name from standard user to administrator.

  You can try to start in safe mode and check if you can create a new administrator account on here.

  Step 1:

  You can see the following link and start in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  You can view the following link to create the new user account:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Also check out the link:

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Hope this information is useful.

• How empy and replace the buttons inside the Manager of horizontal management.

  Hello! So basically, I have 2 buttons at the top of the screen and a set of buttons inside a HorizontalFieldManager (let's call is Set 1 and 2). Now, when I click on the first button it should appear a Set 1 and then appear Set 2 and remove the Set1 on screen. How can I do this? Thank you!

  -Ryan

  The details in the referenced thread, you should get going.

  Basically, you add and remove fields.

  I suggest that you have a Manager to Set 1 and a Manager for value 2.  Add the two managers to the screen, with nothing in it,

  Make sure that Manager 2 is empty (deleteAll) and add fields associated with the value 1 to the Manager for the value 1, when they should be displayed - i.e. trigger it by pressing button 1.

  Remove the fields in Manager 1 and add the fields associated with the value 2 to the Manager for Set 2, when they should be displayed - i.e. trigger this by pressing button 2.

  I hope this helps.

• How can I export the schema with all objects and a few tables without data

  Hi all
  
  Verion 10g EA.
  I export the schema with all objects but I need ignored some of the data in the table.
  
  There is a table 4 people gave huge, we need not to export data from tables but structure must export.
  
  
  Thank you
  Nr

  You can do this with a single command.  Run your export as usual and add the query parameters for 4 tables you want all the lines:

  expdp... query = schema1.table1: "where rownum = 0" query = schema2.table2: 'where rownum = 0'...

  It is best to place the query parameters in a parameter file if you don't have to worry about escaping special characters of the OS.

  Dean

• How do you get the necessary codecs to AVI on Windows Movie Maker files to run?

  I tried to open an AVI video file on Windows Movie Maker for the first time, and he said was: "the file cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. »

  -What this means and how I can get the codec?

  Help, please!

  You must use an application like MediaInfo to identify the missing codec and then download the one you need. MediaInfo can analyze the video file and provide a link to download the appropriate codec. Here are some additional details on How to solve the problems of codec with MediaInfo.

• How can I find the appropriate program I should use to open a file downloaded from the internet?

  I saved an acknowledgement of the internet to a file on my computer so I could print later, now when I try to open my computer asks me what program to use.  Any program I try it says that it is not able to open the file. How to find the right program to open my file?

  Hi Grace,

  I understand that you are facing problems with opening a file in your computer.

  We need more information to help you in a better way.

  1. What is the file extension of the file you're trying to open?
  2 is the issue limited to this file?
  3. are you able to open the file in Internet Explorer?

  Your computer would not program to open that particular file format.

  You can see the following articles for reference.

  Open a file or folder

  
  http://Windows.Microsoft.com/en-in/Windows-Vista/open-a-file-or-folder

  Change the program that opens a type of file

  
  http://Windows.Microsoft.com/en-in/Windows-Vista/change-the-program-that-opens-a-type-of-file

  Please respond with the required information and we will be happy to help you.

• How can I change the parts of an object in motion?

  I have a character who is running, and I would change her outfit at some point without redoing the keyframing. I have two outfits made in illustrator and tried alt-do drag the 2nd outfit on a duplicate of the 1st precomp animation but instead of sticking up stick everywhere wherever he wants in the framework.

  I'm looking for this exact purpose:

  Abhishek Shankar - HCL (Cup Director) on Vimeo

  Which layer you are trying to replace?

  Simply slide the replacement layer to the timeline above the existing animation layer. The value of ICT for the beginning of the animation, select the replacement layer, hold down the SHIFT key and the parent of the new layer to the original. If you need to change the pants and shirt, then you will need to do the same thing with both of these elements. Now the SHIFT key when parenting blew up the child, the replacement layer, at the current position of the layer parent so no programming should be required. If you start the scale or rotation then either you adjust the scale and rotation of game or you will need to use the duplicate layer I want to replace the thing and then replace the images with the new layer. This can cause problems if there are things related to the duplicated layer, you may need to be a little creative. I can't say that if I see the layer that you want to replace by it all changed properties revealed in the first keyframe in the animation of this layer. For example, if you want to replace the torso layer then select this layer, press twice the key U, then show me a screenshot which includes all the properties that are modified for this layer.

  All this may be easier if you simply duplicate the composition in the project Panel, and then change the layer source footage in the double. Then you can just put the two compositions in a master model and make a transition between them.

• How do you get the layers work correctly when you create a document merged into the InDesign data merge feature?

  Hey everybody,

  I working on a card game using data with a .csv file merge and spin in unusual behavior when you create a merged document when my master document had layers.  Imagine I had a layer of structure that looks like this:

  Layer has
  -< DataMergeFrameA >

  -Cooked in the static element
  Layer B

  -Cooked in the static element B
  -< DataMergeFrameB >

  -< DataMergeFrameC >

  Layer C
  -Cooked in the static element C

  -< DataMergeFrameD >

  Preview, this hierarchy is respected and the image is superb.

  When I create my merged document that each individual card includes this editable structure:

  Layer has
  -< DataMergeFrameA >

  Layer B

  -< DataMergeFrameB >

  -< DataMergeFrameC >

  Layer C

  -< DataMergeFrameD >

  And the order in which the elements are drawn resembles what happened past:

  -< DataMergeFrameA >

  -< DataMergeFrameB >

  -< DataMergeFrameC >

  -< DataMergeFrameD >

  -Cooked in the static element

  -Cooked in the static element B

  -Cooked in the static element C

  I would * really * like solving this problem without going through a column of data fusion with just the same picture in each area or something stupid like that, especially because some of my other static elements are generic text boxes. Is it possible to apply the stacking order in a merged document?

  I have attached a screenshot of the preview and the merged document.
  * WARNING: The main art is a temporary placeholder *.

  The one on the left is how it looks in preview. The second is the merged document. The major problems are that a) static grass image should appear on the art main and b) main image overlays areas of main text on the left. How can-

  

  Try moving it all off the master and on the page of document in the model.