How set/enable the authorization requested by programming?

Similar Questions

• How to enable and disable a simultaneous program to a Pl/sql Package

  How to enable and disable a simultaneous program to a Pl/sql Package

  I just want to know why this not prvent not the program to run, it updates the backend for open State helped N, but not in Frontend.

  If you can advise on the same.

  Did you use the API to change the ENABLED_FLAG of 'Y' "N"? If so, you commit the changes? What happens if you ask this program contributing to the application (simultaneous > program > set), can you confirm that it is disabled then if this has been done since the backend? The program remains active after the deactivation of the application it?

  Thank you
  Hussein

• Satellite L500 - how to enable the WLAN?

  I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
  I used to market its WIFI by pressing the FN + F8 keys.
  But now I can't on it using the method.
  I downloaded its end drivers.
  In reality its all the function keys do not work.
  Please let me know how to enable the WLAN and function keys.

  Hi kim2kjy,

  You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?

  The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.

  Check this box!

• How set you the sensitivity of the keyboard on a touchsmart quad 17 t enyv

  How set you the sensitivity of the keyboard on a touchsmart quad 17 t enyv

  Keyboard:

  http://support.HP.com/us-en/document/c03738933

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• How to enable the ReadyBoost feature?

  I would like to know how to enable the ReadyBoost feature.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  I would like to know if it is possible to assign an SSD internal to do this instead of using a USB drive or not.  I tried ReadyBoost option in SSD drive is not available.

  Do you have any suggestions?
  Thanks a lot for your suggestions :>

  Hello

  Sorry, but you cannot use an internal hard drive for ReadyBoost. Indeed, an SSD can not use ReadyBoost.

  This feature can use a USB flash drive external as a hard drive cache to improve the disk read performance.

  More information on the following links.

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  Turn ReadyBoost on or off a storage device:
  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Concerning

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How to enable the CDI an area of weblogic (not IntegratedWeblogicService)

  I created a project with IDC in Jdeveloper 12.1.3 and it works very well in IntegratedWebLogicService. I deploy it as a WAR file to a weblogic domain. However, the jsf pages cannot get the value of beans and just show #{items.smallest} , #{items.biggest}.

  How to enable the CDI in a weblogic domain base?

  Thank you very much.

  CDI is not an option available on Weblogic server or a configurable parameter.

  It is a feature of the Java EE 6 platform and you can not disable/enable the only feature on weblogic server.

  Try it below to solve the problem

  Connect to the stand-alone server administration console and check if libraries necessary dependency for your application is deployed, or the necessary components have been extended during the creation of the field.

  You could quickly check comparing deployments of libraries on both stand-alone and integrated administration console weblogic server.

  Registered the application libraries is also written in the config.xml file, which can also be used to compare.

  It could be useful!

  Thank you

  Vijaya

• How to enable the TOC in cp Bill?

  I am a new user to Captivate.

  How to enable the TOC in cp Bill? Please suggest

  Go to option menu project-> Table of Contents-> select Show TOC.

  Table of contents will be activated.

• How to enable the Welcome screen in photoshop cc?

  With photoshop the new se update. The home screen has disappeared and I wanted it back. I found it very useful with some of my drawings. How to enable the Welcome screen?

  And just to clarify: Welcome screen has been replaced by the workspace of departure, completed by the advice that the Welcome screen was (although I admit that's exactly as good).

• How to set up the Windows network access program?

  original title: how to set up the N A P

  How to access my windows network access program

  Hi bryan stacy,.
   
  - What version of the operating system are you using?
  -Are you talking about in the center of network share or the network connection folder?
   
  If you are referring to the network connection folder, see the following link for more information:
  Work with the network connections folder

• How to enable the WLAN of Compaq 510 in Windows 7 Starter?

  Hi, since I was on the dial-up connection and turn off my WIFI connection, I don't know how to turn on my WIFI, when I click on the switch for WLAN, bluetooth on and it also shut down, I don't know how to activate it, please I need your help, as soon as possible.

  Hi Justin,

  Thanks for posting your query in Microsoft Community.

  I suggest to check the Autoconfiguration WLAN service and set it toAutomatic and check if the problem persists.

  a. click the Start button.

  b. type services.msc in the search box and press on enter.

  c. Locate the autoconfiguration WLAN Service and check if it set to Automatic & not automatic delayed.

  If you are still facing the same problem, then turn on tracing for a local wireless network when you start a Windows Vista-based computer.

  To enable tracing for a WLAN in Windows 7, follow these steps:

  a. click on start to reduce this includes this image and then type cmd in the box start the search .

  b. right click on cmd in the programs list and then click run as administrator.

  The collapse of this includes this imagIf you are prompted to confirm that you want to continue, click continue.

  c. type the following line at the command prompt and press ENTER:

  netsh wlan set tra persistent

  The monitoring starts immediately and is persistent. When you restart the computer, the tracking begins shortly after the start of the WLAN auto configuration service. Existing monitoring log files are overwritten.

  Note: To stop the follow-up after you activate it, use the following command:

  Netsh wlan set tra no

  For more information, please see: How to enable tracing for a LAN wireless in Windows (for Windows 7)

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• How to enable the DVD library in WIndows 7 Media Center

  How do you enable DVD library in Win 7 Media Center?  I tried editing the registry as in Vista, but it does not work with Win 7.  I am running Win 7 Pro 64-bit version.  Thank you

  Hi zt75,

  Run you manually editing the registry?

  Have you clicked on fix it from the link below? If this is not the case, click on fixit and check if that helps.

  How can I enable the DVD library in Windows Media Center on a Windows Vista-based computer?
  http://support.Microsoft.com/kb/930526

  (Although this article is for Windows Vista, we can always give it a shot in Windows 7.)

  Or do these steps and check.

  To enable the DVD library in Windows 7, follow these steps:

  1. If Windows Media Center is running, close it.
  2. click on start.
  3. in the search box, type regedit.
  4. in the list programs, click on regedit.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  5. Locate and then click the following registry subkey:
  
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Media Center\Settings\Video settings

  6. in the Details pane, right-click VideoGalleryView, and then click on edit.
  7 remove the content that appear in the value data box.
  8. in the value data box, type Gallery, and then click OK. Registry value data: Gallery = Activate My DVD; Play = not to activate my DVD
  9. close the registry editor.

  To verify that the automatic fix worked, restart your computer. You should now see "DVD library" from the menu. To add DVDs, go to the menu information (click on 'i' on the remote control) and select "Add Movies.

  Try this also:

  1. If Windows Media Center is running, close it.
  2. click on start.
  3. in the search box, type regedit.
  4. in the list programs, click on regedit.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  5. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Start Menu
   
  Check if it has a value of HideDVD, and if the value data is set to 1. If the data in the value of HideDVD is set to 1, then you have two options. One option would be to delete the HideDVD value. The other option would be to change the value from 1 to 0 data.
  6. close the registry editor.

  EDITING REGISTRY WARNING:
  Important:   This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
  
  Additional information:

  http://blogs.technet.com/fixit4me/archive/2009/01/02/enable-Media-Center-DVD-library-fix-it-live.aspx

  Aziz nadeem - Microsoft Support

• How to enable the function keys beats again after the upgrade of the OS?

  How to activate the function of key Beats again after an upgrade of the OS which is Windows 7 Ultimate 32 bit, I use HP Mini 210-4000

  Stealth,

  The combination of bat function keys is

  FN + b

  as stated in your Quick Start Guide

  Chapter 1, Page 2

  The Guide:

  Beats Audio is an improved audio profile that offers a deep, controlled all low by maintaining a
  Crystal clear sound. Beats Audio is enabled by default.
  ▲ To enable or disable the Beats Audio, press fn + b.
  Select Start > Control Panel > hardware and sound > Beats Audio

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  If you are having problems with the audio works as it should, you may have to (re) install the drivers from the website of your laptop.

  There are actually two different models in the category of 210-4000 Mini.

  Start here to the Support and drivers

  • Select the model entry that corresponds to your laptop.
  • Go to Software and Driver Downloads
  • Select your operating system (Windows 7, 32-bit), and then click "Next".
  • Scroll down
  • The Audio driver is the first category...
  • Download the package, pay attention to where it is saved.

  Given that you just upgraded (probably from Vista?), you may need to update some other software too.  Go through the different categories and see if you need / want any of the other packages.  Most of them can be added 'above' of what you already have on the system.  If you must delete something, the program will inform you when you try to install the new version.

  • If you have control of "Admin", we can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  For Audio driver... After you update / install the driver, reboot your computer.  After that, you should have your software Beats back.  If no joy yet, go back and get the software Quick Launch bar of your website (heading Software Solutions) and install it...

  Good luck!

  ----------------------------------------------------------------------------------------------------------

  Click on the star of white Kudos on the left to give Kudos for assistance.

  Please click "accept as Solution" to say the problem is solved.

  Always include: (Computer) product number , printer - model number ,.

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!