How the hell do you have this thing uninstalled from your computer?

Similar Questions

• ThinkPad 560 X - How the hell do you have the CD of external work?

  I just bought a 560 X used to use a development for Windows 98 computer.

  HARD drive was empty. I am looking for the external CD (P/N 1969-010) to work.

  I installed DOS 6.22 software then Cardsoft for DOS. When I inserted the IBM IDE PC card, the system emits a signal indicating that it has recognized that a card has been inserted, but nothing else happens.

  I have tracked down a lot of files to options/install/etc on the support site but have not yet tried all the.

  Will try to install Windows 3.1 and using some install files for Cardsoft for 3.1 but I guess just at present.

  I have the impression that there should be an installation file/program for the CD itself, but did not find one that looks right.

  I just want to get the CD to work so I can install Windows 98. Then I need to be able to use the CD with Windows 98.

  Any suggestions?

  Solved by myself - after a few permutations.

  (1) installed BACK 6.22

  2)
  Using another system, I find the driver on the Lenovo site,
  files for CardSoft for DOS (pctpcdos.exe) and IBM 20 X Max Portable
  P/N 1969010 (820xnosd.exe) CD-ROM drive

  These two files are self-extracting compressed files. Execution of creates them a diskette in A:

  (3) BACK started on the Thinkpad X 560

  (4) Insert the diskette for Cardsoft created by pctpcdos.exe software.

  5)
  Install.exe Ran from the diskette. This installs BACK support for the PCMCIA
  cards. In this case, we want to use the IBM IDE PC Card used for
  connect the CD to the 560 X.

  (6) switched disks, inserted the diskette created for CD 820xnosd.exe

  7)
  Passed to A: and run install.exe - important, for some reason any
  the installation program does not run correctly unless you switch to the A:
  drive. Using A:install does not work. You do A: the current
  drive.

  (8) the CD is now available at BACK

  (9) copied all the contents of a Windows 98 installation CD into a directory named WIN98CD hard disk

  10) ran Windows Setup from the hard drive.

  11)
  After the installation is complete and has detected all new
  material, I used the point to install new hardware from the control panel
  looking for a new material that was not installed.

  (12) the CD
  has been located. I put the Setup CD disk (created in step 2 of the)
  file 820xnosd.exe) and made the installation of the driver to the A: drive.
  Windows finds the correct driver and - hop, the CD player is now
  recognized and is usable from Windows 98.

  After getting the CD
  working, I used the other drivers that I found during my search of the
  Lenovo - things like audio and video - site and install them.

  Here
  is a complete list of the files that I downloaded from the Lenovo site. They
  include various support for BACK, Win3.1, Win95 and Win98

  Note-
  the date and time are the date and time when I downloaded the files to
  my system, not the date and time of the file on the Lenovo site.

  Short name          Size    Date            Long Name--------------------------------------------------------383956HW PDF        40,866  10-06-08  6:58p 383956hw.pdf560XHMM  PDF     1,032,670  10-06-08  7:08p 560xhmm.pdf56XUSE~1 PDF     1,593,876  10-06-08  7:09p 56xusergd.pdf820XNOSD EXE       236,610  10-08-08  3:33p 820xnosd.exe820XSND  EXE       858,933  10-08-08  3:49p 820xsnd.exe820XSND  TXT        54,402  10-08-08  3:29p 820xsnd.txtAFTPRW31 EXE       996,352  10-06-08  6:24p aftprw31.exeAFTPRW31 TXT         2,597  10-06-08  6:22p aftprw31.txtAFTPRW95 EXE       621,568  10-06-08  6:30p aftprw95.exeAFTPRW95 TXT         4,121  10-06-08  6:28p aftprw95.txtD3Q1CMST PDF     3,766,792  10-08-08  4:04p d3q1cmst.pdfIRTPRDWO EXE       240,313  10-06-08  6:32p irtprdwo.exeIRTPRDWO TXT        10,240  10-06-08  6:31p irtprdwo.txtKXP101WW TXT         6,239  10-08-08  2:55p kxp101ww.txtPCTPCDOS EXE       747,834  10-06-08  6:35p pctpcdos.exePCTPCDOS TXT         3,722  10-06-08  6:33p pctpcdos.txtPCTPCW31 EXE     1,099,606  10-08-08  2:10p pctpcw31.exePCTPCW31 TXT         3,754  10-08-08  2:07p pctpcw31.txtPCTPGW95 EXE       834,271  10-08-08  2:19p pctpgw95.exePCTPGW95 TXT        13,023  10-08-08  2:18p pctpgw95.txtPCTPIWDS EXE        57,339  10-08-08  2:56p pctpiwds.exeSG245294 PDF     4,079,144  10-08-08  4:21p sg245294.pdfSPSDI833 EXE       486,851  10-08-08  4:23p spsdi833.exeSPSDI833 TXT         8,205  10-08-08  4:21p spsdi833.txtTHS6017F PDF       111,734  10-06-08  7:01p ths6017f.pdfTPP95RLD EXE       839,220  10-06-08  6:50p tpp95rld.exeTPP95RLD TXT         1,891  10-06-08  6:44p tpp95rld.txtUTTP2W31 EXE     1,428,480  10-08-08  4:19p uttp2w31.exeUTTPFDOS EXE       349,563  10-06-08  6:36p uttpfdos.exeUTTPFDOS TXT         6,660  10-06-08  6:34p uttpfdos.txtUTTPFPER EXE       109,134  10-06-08  6:40p uttpfper.exeUTTPFPER TXT         2,704  10-06-08  6:38p uttpfper.txtUTTPFW31 TXT         7,772  10-08-08  4:06p uttpfw31.txtUTTPFW98 EXE     7,348,900  10-06-08  7:19p uttpfw98.exeUTTPFW98 TXT         8,799  10-06-08  6:36p uttpfw98.txtUTTPPERD EXE       129,634  10-06-08  6:41p uttpperd.exeUTTPPERD TXT         2,367  10-06-08  6:38p uttpperd.txtVFTPI89M EXE       429,377  10-06-08  6:55p vftpi89m.exeVFTPI89M TXT         7,678  10-06-08  6:49p vftpi89m.txtVFTPXW31 EXE       810,712  10-06-08  6:54p vftpxw31.exeVFTPXW31 TXT         2,484  10-06-08  6:44p vftpxw31.txtVOL4HMM  PDF     8,194,060  10-08-08  3:53p vol4hmm.pdfW95SFD56 EXE       262,355  10-06-08  6:58p w95sfd56.exeW95SFD56 TXT         6,078  10-06-08  6:55p w95sfd56.txt
  

• How the hell do you have Dreamweaver CC to stop copying of dependent files?

  I'm writing a WordPress theme using the bootstrap information. After writing the function to call in my file Functions.php Dreamweaver decides that he knows better I'm doing and started to copy the files and adding crap to the file.

  When I go to save the following occurs:

  1) the following four lines of code is inserted into the top of the file:

  "< link rel ="stylesheet"type =" text/css"href ="... /... /.. "/ bootstrap/css/bootstrap.css" / >

  "< link rel ="stylesheet"type =" text/css"href ="... /... /.. "/ bootstrap/css/bootstrap-responsive.css" / >

  "< script type =" text/javascript"src ="... /... /.. / bootstrap/js/jquery.js "> < / script >"

  "< script type =" text/javascript"src ="... /... /.. / bootstrap/js/bootstrap.min.js "> < / script >"

  (2) Dreamweaver copies bootstrap into a directory in the root of my site (I want it in the folder/wp-content/themes/theme)

  Hi all

  Check/copying files automatic can be disabled and this is described in the videos section on the DMXzone Bootstrap product page. Please see the tutorial on www.dmxzone.com/go/21913/using-dmxzone-bootstrap-include-options

• Do I need to buy a license, even if I am registered for the promotion of 10 free images? If this isn't the case, then how the hell do you want to download the images?

  Do I need to buy a license, even if I am registered for the promotion of 10 free images? If this isn't the case, then how the hell do you want to download the images?

  Go to your license history and you will see the license key. By clicking above opens a dialog where you can buy an extended license, simply select scope from the menu drop down.

  

• How the hell can I open this PDF file? !!!

  Original title: how the hell can I open this file? !!!

  I have files which are "PDF" files, but I can't open them.  What I am doing wrong?

  Do you have a PDF Reader installed?

  Adobe Reader
  http://get.Adobe.com/reader/

  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

  Adobe is more "well known", but Foxit is much more compact and my personal preference.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• The streaming videos on Windows Media Player error "your media usage rights were corrupted or are no longer valid. This can happen if you have replaced hardware components in your computer.

  I'm trying to videos from 3 completely different sites.

  The last post I got Windows Media player was

  "Your media usage rights were corrupted or are no longer valid. This can happen if you have replaced hardware components in your computer. »

  I replaced WITHOUT hardware on my computer, and last week, I could listen no problem at all!

  How to get corrupted my media usage rights and how to remedy the situation?

  I'm not a complete dummy, but sometimes I feel like one. :(

  Hello

  This problem can occur if the media rights (DRM) a folder is corrupted. We need to reset Windows Media DRM in delete/rename all the files in the Windows Media DRM folder. Note that the Windows Media DRM folder is a hidden system folder.

  Check out the links and follow the suggestions that are marked as an answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Winapps/getting-error-messageyour-media-usage-rights-have/54bfacbb-C104-4c22-800F-f293d18d94c2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/constantly-getting-this-message-your-media-usage/840c560d-04aa-4ae2-aed0-59022cfdef04

  Please let us know if the problem still persists.

• How the hell do you send an email about this crazy thing

  There is no send button. The entire page resembles the trash. All the tools known to facilitate this are a nightmare. None of this email, I want to remove will remove with your new crazy brainstorm, "uncheck to checked. Nothing works and do you really think that we all have the time to understand? Just tell me how to send an e-mail. Now, after years of simplicity I need to change my email address and warn everyone because of it!

  Please note that this is a peer support forum. Almost everyone here is just a user like yourself and not an employee of Microsoft, offering their free time to help out.
   
  I directed you to the Outlook.com forum and that's the best I can do. Here you can rant to Microsoft.
   
  
  Contact Microsoft Online Services
  http://www.Microsoft.com/online/help/en-us/helphowto/0151a9e3-5fa4-4065-b2b3-811c76202805.htm
   
   
   

• If you are sure that you have a keylogger program on your computer and essentials windows does not detect, what is the next best thing to do?

  I don't know that the keylogger software has been installed on my computer.  I want to remove it, but windows essential, detection of malicious software Microsoft windows tool is not found.  There must be a way to detect without exposing my pc for potentially harmful software by buying something on the internet.

  Hi Sandra,.
  If you want to remove the keylogger, try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• How the hell can you stop these calls?

  We have been plagued by these calls for months, we can't make them stop. The caller display shows not available or international. At present, we receive calls from 3 or 4 per day. He has, in fact, worsened by telling them that we know that it is a scam, leaving the phone off the hook does not work or not speaking to tell them that it is a scam or not. any ideas please?

  I just read an article about it today. If you are not yet on the "Do not call list" and you reside in the United States, know about it.

  If they are the Robo calls. Simply do not answer when you pick up will get them to stop. If I don't recognize the number, I pick up. If you do not pick up and they choose a number option (as support on 'on' to delete your number), off the phone. If you answer that they know that it is a viable number and they'll keep the appellant.

  On live calls, I used a whistle and even shouted. Some times it works. Most of the time it isn't. Get info and call to gripe to the Governor if you are on the list. They get a fine for each infringement.

• How the hell do you export to MPEG-2DVD in Premiere Pro &amp; or Media Encoder?

  I'm having the same problem persisted in first Pro CS5.5. I can't export a sequence on as encode a MPEG-2dvd in Premiere Pro, nor as a 2dvd MPEG in the media. I even tried encode the file as an AVI file and then take the AVI file and convert it to a MPEG-2dvd in media encoding. No dice. The file with what I'm doing all this is a sequence of 26 minutes on the earlier chronology, so it's no pig space and data. It is originally a MPEG-1 file. I get the error both Adobe premiere and adobe media encoder can don't not reads the m2v.xmpses files. I already understand that they broke in separate files, with the m2v in there like the video, the audio file that represents the audio and the xmpses containing the metadata, but these files are not separated in my experience with this problem. the m2v.xmpses is a file, and it can not be separated. Ive been told that these files are separate streams which must be "multiplexed" together in a single workable file. How do you do that?

  Thanks in advance to anyone who tries to solve these problems.

  Please specify your workflow. If you work with NTSC, then your sequence should be 720 x 480 DV, to match what the DVD will be. From the first, use file > export > Media. Choose MPEG-2 DVD format and for the preset, choose NTSC high quality for example (for 4:3). Export.

  You get 3 files - clipname.m2v, clipname.wav and clipname.xmpses

  In Encore, use the IMPORT AS TIMELINE and select only the m2v and wav files, but NOT the file xmpses. Still will know where to look for the xmpses and will pull in chapter markers, NOT to import this file or do something with it.

  Jeff Pulera

  Safe Harbor computers

• How the hell can I do this hour-plus process?

  We e-mail broadcasts that have begun to choke our outgoing smtp server, so I need to send small groups at fixed intervals. 1 000 emails in batches of 100 every 10 minutes would take well over an hour which is good for sending, but NOT for the CF Server!
  
  Obviously (to the right)? I can't have a process running this long on the server, so y at - it another way that having a task running every 10 minutes to check what was sent etc etc?
  
  I tried incrementing counters and cflocating a page back to itself after a break with this code and it seems to work, but it's the best approach? :
  
  < cfif not isDefined ("url.pass") >
  < cfset url.pass = 1 >
  < / cfif >
  < cfset maxx = 4 >
  < cfset pass = #url.pass # + 1 >
  < cfset attributes.interval = 4 >
  < cfscript >
  thread = createObject ("java", "java.lang.Thread");
  thread. Sleep (javaCast ("long", 1000 * attributes.interval));
  < / cfscript >
  < cfif #pass lt # #maxx # >
  < cflocation url = "Untitled - 5.cfm? pass = #pass #">"
  < / cfif >
  
  Any comments would be greatly appreciated!
  
  Thank you
  Richard

  cfchedule I had totally forgotten about it. Very cool. Can I schedule a task to run until it ends, then remove it when finished. Perfect.

  Thank you!!

• How the hell this guy fired with its extruded 3d pencil?

  In the following video, Mr. Smith a first extrude text. Then, about 40 seconds, he takes his pencil and draw a line and it is automatically expelled. How the hell did do that? Looks like it is expelled as soon as it leaves his click. Am I just missing it does 'shift-control-e' to apply the same 3d effect immediately to his line? Of course it looks that he was not obligated to do that... I see in the appearance Panel, that there is "no selection", but this 3d extrusion effect is shown here.

  http://www.Adobe.com/DesignCenter/video_workshop/?ID=vid0053

  If you create an effect that you can keep this effect to the newly created art making in this new Art has basic appearance is deselected in the appearance Panel. Now, make an impact to a certain type, now draw a line. If you have this deselected in the context menu of the line appearance Panel should have the same effect as the type.

• Disable the pop up "you have new applications that can open this type of file.

  Disable the pop up "you have new applications that can open this type of file.

  And HOW do I GET THE BUTTON SUBMIT ON THIS ISSUE at WORK?

  Hello
  The notification will automatically turn off once you open this type of a file several times.
  In addition, if you enable notifications, you can go to:
  Charms bar > settings > Notifications > turn off notifications for... hours.

• Your support staff had deleted all my creative cloud and Lightroom apps remotely and asked me to restart! Now I have nothing! How the hell can I get the back lot?

  Your support staff had deleted all my creative cloud and Lightroom apps remotely and asked me to restart! Now I have nothing! How the hell can I get the back lot?

  You can check the link below to reinstall the Cloud Creative applications

  Download and install Adobe Creative Cloud apps

• I am trying to download the InDesign CS5.5 update and continue to be "Update failed" "please contact your administrator if you want to apply updates on your computer. I did this and now have administrator rights, but I still get the message. Ho

  I am trying to download the InDesign CS5.5 update and continue to be "Update failed" "please contact your administrator if you want to apply updates on your computer. I did this and now have administrator rights, but I still get the message. How to do the update?

  Direct updates
  -----------------

  https://www.Adobe.com/downloads/updates/