Wireless implementation

Similar Questions

• Switch off latitude E5500 wireless?

  Hi all

  I used the wireless internal (1397 mini-map) for a couple of years now... All of a sudden the WIFI light is not on above my keyboard... Win 7 reported no problem with the card and the driver seems to be ok... Others have told me to try the FN + F2 to re - turn on the wireless switch, but this combo doesn't change anything... In fact, on my laptop, this combo determines if the AC adapter charges the battery or not so that hip.

  I started my dualboot XP real fast... ON this OS, the wireless is controlled by the application of dell and the software dell says that the wireless radio switch is off? Everything is enabled in the BIOS under the wireless section... This must be a different key combination to toggle the my wireless phone?

  I plugged my dongle wireless from another machine and everything works beautifully...

  Any ideas?

  Well, everyone,

  Only, I've solved my problem... I can't believe that I didn't know where this switch was and what it does... As soon as I posted, I found a site that has good information for this laptop... The FN key on the E5500 has nothing to with the wireless implementation power. I literally burned through 50 sites with everyone saying: 'just hold down the FN key and press F2 '... I don't know why everyone has the wrong info on this laptop.

  There is a toggle switch on the front of the laptop (just below the plane of the keyboard)... It's where your left wrist sits when you type on the keyboard... It has a symbol to switch wireless access point... It looks like this:

  Here is a picture of the site:

  In this diagram, the number 7 is exactly where the toggle switch must turn wireless radio switch. This message was perhaps a bit exaggerated, but I was about to tear my hair out trying to understand why my darn phone was not working. I hope this help anyone who reads.

  Thank you

  Ron

• Corrective measures wireless

  I'm looking to improve a wireless implementation that does not work as required. The first step would be to conduct a study of the site. Can I do it with the existing operational network, or take the hit and turn off the APs for a day or two?

  Mark

  Necessary first step to shut down your existing wireless network to carry out an investigation. in fact, a survey of your existing running network is necessary to determine if you have a coverage problem or the source of your problem is something else like an oven to microwave or a misconfigured AP or out-of-date drivers on the users compters. Some wireless integrated into laptops have had serious problems with the original drivers.

  Cisco abg card comes with a survey tool that is very useful.

  http://www.Cisco.com/en/us/docs/wireless/wlan_adapter/CB21AG/user/2.0/Configuration/Guide/winapFkh.html

  This link leads to annex F, which explains how to perform a survey of site with the tool.

  If you have a spare AP just configure it with an SSID different and put in place in various locations to check the coverage, and it should not interfere with your existing wireless network.

  Bill

• Problem of AirPort Extreme with AirPort Express network expansion

  I have a dual-band Airport Extreme 802.11n that I bought in 2012 which is currently my home wireless network. I am trying to extend the network with a new AirPort Express with the AirPort 6.3.6 utility running OS 10.11 on an iMac. The Airport Express appears in the option other Wi - Fi devices. When I select it, AirPort utility tries to connect and then I get this message "an unexpected error has occurred. Try again. "Try again does not lead to a different result, and I can't seem to find useful information in the documents support or conversations. Any suggestions? Thank you!

  It should be easy enough to operate the express, but you must tell us all the info.

  Configure the Express in the same room as the extreme.

  Using wireless to expand? Then you simply plug power in the Express... and it should pretty much automatically connect to the extreme.

  If you want to extend through ethernet, you should connect the Express in the extreme and make sure that the configuration of the airport utility selects extend by wire.

  If the Mac does not work you have the iphone or ipad and use Airport utility for iOS... it tends to be more reliable.

  Still no luck does your Mac have port ethernet... in this case, you can plug it into the computer with ethernet and try again... more wireless implementation looks like sawing off the branch to that which you are sitting.

• Logon key Bluetooth does not recognize mobile phones during the installation procedure

  Hello

  My Portege M400 with bluetooth stack 4.00.25 (bought in July 2006) doesn't recognize any mobile phone during the implementation of how to connect key wireless - except once with a foreign mobile PHONE a few days ago.

  Mobile phones are also recognized as bluetooth devices, only the logon key wireless implemented the procedure shows:
  "No mobile phone not found, check if bluetooth is enabled" (in German, so this formulation is my translation).
  To my confusion, I tried to connect with someone elses phone to make sure that this isn't my phone (MDA) and this foreign phone has been recognised at the time. I'm not throughout the implementation of procedure, as I didn't want someone elses phone to log on my computer.

  Now, a few days later, I decided along with that foreign mobile, just to check the operation of the entire wireless log on procedure, but now the phone that worked a few days ago is not recognized, too?

  I can't find out what is the cause. Is there anyone who has an idea?

  Help would be very appreciated.

  Kind regards

  Papak

  Have you turned on the Bluetooth on the laptop with FN + F8?

• Downgrading to Windows XP to Vista - drivers CQ40-340TU need it please!

  I just bought a laptop yesterday, Compaq Presario CQ40-340TU. It came with the operating system Windows Vista Starter. Due to limitations with networking, I need to install Windows XP on this laptop now. I have my own installer of Windows XP and cannot afford to buy a different version of Windows Vista, so this isn't an option for me.

  I really hope someone can help me find drivers for Windows XP for the following items. I don't even know if they have the right plug for my laptop model, but I found them on a site selling the same model and HP's product information page.

  I already have nLite and I'm ready to integrate with my installer of Windows XP SATA drivers but I don't know what drivers to include. Please, help me!

  Technical specifications
  Processor Intel Pentium Dual Core T4200 (2.00 GHz, 800 MHz FSB, 1 MB L2)
  Chipset Mobile Intel GL40 express chipset
  Free DOS operating system
  Graphics Intel GMA 4500 Graphics card
  Up to 1759 MB of Intel DVMT 5.0 video memory (64 MB of memory dedicated, up to 1695 MB of shared memory)
  Screen WXGA 14.1 inch Panel high-definition * widescreen
  Memory 1 GB DDR2 800 Mhz
  Housing of 2 memory Slots
  250 GB SATA HDD
  Optical drive Super Multi 8 X drive with Double Layer Support
  10/100 integrated network/wireless implementation high-speed 56K modem, LAN, 802. 11 a/b/g WLAN, Bluetooth
  Integrated 5-in-1 memory slot digital media card reader (xD, SD, MMC, Memory Stick and Memory Stick PRO)
  Webcam integrated i/o, RJ-45, headphone port, microphone, omnidirectional microphones (2), power adapter, output S-video, Kensington lock, VGA, USB 2.0 (3), Rj - 11, HDMI port
  6-cell Li-ion battery
  65W AC adapt Power
  Dimension (Lxwxh) 33,40 cm (W) x 23.70 cm (L) x 3.3 cm H
  Speakers Sound Altec Lansing® speakers
  Approximate weight of 2.29 kg (5.03 lb)

  * edition: profile for www.asianic.com.ph

  I would appreciate a response from anyone... I have not enjoyed my new laptop because of the problems with the networking. Help, please.

  Message edited by JuzAnotherGurl on 03/24/2009 09:33
  Message edited by JuzAnotherGurl on 03/24/2009 09:34

  Rakhmads post should work for you:

  http://h30434.www3.HP.com/PSG/board/message?board.ID=OS&message.ID=6092&query.ID=569151#M6092

  http://h30434.www3.HP.com/PSG/board/message?board.ID=OS&message.ID=625&query.ID=568781#M625

• Wireless printer HP officejet 4500 has been implemented and it is not

  All of a sudden, my printer does not print unless it is connected by usb cable.  I lost my cd to install for the printer and can't seem to implement wireless again.  I am using cisco linksys e-series wireless. Any thoughts on what to do?  I think that I tried everything, but the wireless just repeat that the printer was not installed.

  All of a sudden, my printer does not print unless it is connected by usb cable.  I lost my cd to install the printer and no can't do implement wireless again.  I am using cisco linksys e-series wireless. Any thoughts on what to do?  I think that I tried everything, but the wireless just repeat that the printer was not installed.

  Hello

  Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

  And there are some troubleshooting steps for her there too.

  There is more than one model for this shortened printer issue, you have given us.

  Choose the right pair of the list in the link

  http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=OfficeJet%204500%20Printer&search_searchtype=s-002

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  @@@@@@@@@@@@@@@@@@@@@@@

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• WRT54G - implementation of password for wireless access

  I am sure that the answer is simple and here somewhere - but I was not able to find it in 2 days.

  I'm just trying to find a way to implement a simple password if the our laptops wireless & the wii and ps3 can access the internet, but the neighbors cannot. =)

  I managed to set up once, but the numbers were about 27 characters and it was an accident, and - I couldn't get a new pc to connect with any numbers, tho - my son somehow managed to get the wii connected...

  I looked through other and the connection name & passwords were pretty basic.  How to set a place for my home lan based?

  Thank you!! =)

  Set up your security here.

• Implementation of wireless in ISE comments

  I'll implement wireless Cisco ISE 1.3 comments. My question is the connections these comments wireless count for simultaneous connections of ISE licenses?

  Hi Abhishek,

  Licenses are charged on the simultaneous, active sessions, and therefore invited users would be counted. You can also license to the ISE consumption.

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-3/admin_guide/b_ise _...

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• Microsoft Surface Pro3: implementation of scan wireless

  I have a printer HP Laser Jet professional M1217 MFP nfw perfectly print wireless.  When I try to set up the "scan document" and looking for my scannoer (printer) it can't find the printer.  I used for the IP address of the printer and it does not always find.

  Please specify,

  HP and Capture scanning does not support your printer as listed in the following document:

  http://support.HP.com/us-en/document/c03489433

  Of the control panel go to devices and printers, remove any existing M1217 Laserjet device.

  Then download and install the HP software full functionality, then scan using HP ScanTo program:

  http://ftp.HP.com/pub/softlib/software12/COL32629/im-80811-7/LJM1130_M1210_MFP_Full_Solution.exe

  As reference, see the following document on scanning with the printer on Windows 10:

  http://support.HP.com/us-en/product/HP-LaserJet-M1200-multifunction-printer-series/4292048/model/4075471/document/c04728884/

  Shlomi

• can not connect wireless or implement a new file network xwizard.dll error

  I just moved and can't set up a new home network or to connect wireless

  It shows available wireless and when I click on connect to the network, nothing happens

  When I try to put in place the new network with the Network Wizard it gives an error of xwizard.dll

  I have tried everything I can at this point and I am at a total loss of figure

  Hello

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

• Office jet Pro 6830: replacement 6830 don't no wireless connection during the implementation using the directions of ink instant

  I received a replacement 6830 due to the print head error. I installed the ink and followed the instructions to install the software. I got to the screen where it searced for my device make the wireless connection and it never "found" my printer. I am not able to connect. Information for install on mine was not clear. I tried to put in some information of the wireless display, and it did not match the format that was requested.

  Now I have a replacement Clipboard because when I try to print, it is not able to locate the printer through the wireless connection. When I go through my laptop to try to connect, I get this message: "Unable to connect with the device selected."

  I have connected the printer to my wireless router on thanks to the function of Assistant, so that is in the printer.

  Hello

  Sorry to hear that you are having problems with the replacement unit.

  Try to remove the printer (or all existing printers) and then add your printer by opening the Preferences tab and then selecting «printers & scanners»

  From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.

  

  I've also included a link here to the guide of the user here that describes the steps of the Wi - Fi page 71 from.

• Help to the implementation of the ipad to print wireless

  I'm trying to set up my printer hp deskjet 3050 to print wireless from my ipad/iphone...help!

  The reason that the issue is important, the Deskjet 3050 does not support Apple Airprint.  The 3050 a supports Airprint.

  This document lists the supported Airprint printers.

  http://support.HP.com/us-en/document/c02814760

• LaserJet pro M201-M202dw: I can implement a Lasrejet pro M201-M202dw for use with wireless and USB

  How can I set up my Pro M201-M202dw of Lasrejet to be accessible via the USB connection or wireless

  Hello @datfr

  Thanks for posting on the HP Forums!

  I should be able to provide assistance. If your LaserJet is already configured on the wireless network and added to the computer, then all you need to do is plug the USB cable into the computer too.  If the printer is not WiFi yet ensure that USB is not connected and run Setup wireless for printers.  Here is a link about the Configuration the printer to a wireless or wired network for the HP LaserJet Pro M201 and M202 Printer series.

  Let me know how it goes!

• Implementation of VLAN for wireless AP with two SSID

  I am trying to install a RV180 and 3 wireless access points. I want that the AP is having 2 SSID isolated from each other. IE comments network and core network. I have setup a VLAN and my AP support 802. 1 q and ssid matching of VID. I could get this background work, but things seem to have gotten confused when I plug a POE switch instead of directly in the rv180 of the AP. At this point I don't know exactly what to ask. Perhaps start by providing information based on how I'm supposed to do. I was under the impression that since both devices are supported 802. 1 q I could configure the VLAN on the router and tell the AP to apply a VID of the SSID and thing would work. This is not the case unfortunately. Any help would be appreciated.

  Aaron Hi, depends what's this switch. If it's a unmanage switch, it cannot process tags vlan so the switch will only be a member of the vlan native who is connect from the router.

  If it is a switch to manage, you must configure the same as the router, a vlan native UNTAG, tag vlan for the connection to the AP and router port.

  -Tom
  Please mark replied messages useful