How the original in the metadata tab can be populated with lot?

Similar Questions

• I have a printer installation on a desktop wireless wireless, how the wireless printer can be shared with the main PC

  Windows 7 PC main with modem and router

  PC Windows 7 other connection via WIRELESS and a wireless HP OfficejetPro 8600
  Problem: How to print on the printer without wire of the main PC

  Check the IP address allocated to the printer.

  On the PC, add a new printer in devices and printers, scanning the network for the printer that needs to be automatically detected, confirm with the IP address.

• How to use profiles for the metadata tab in window of Contribution

  Hi Experts,
  
  Is it possible to use profiles in metadata tab Contribution. ??
  
  I want each payable region must have its own profile. For, for example, if the user will pay company information, then the metadata tab should show only metadata related company, not other meta data that are not relevant here.
  
  
  
  Help, please

  I thought you said you knew how to use/create profiles in your previous post...

  It's the quick rundown: like the regular profiles, you will first need to make sure your content has the metadata field to trigger profile assigned when it is created. This is done in designer under the definition of "Changing the content of the region" in your area of contribution. Assign the "value of trigger to profile" under "Default metadata" and then as idoc to the activation of your profile content rule condition.

• Unable to see the metadata tab in the workbench

  Hai Experts,
  
  I know how to create locations web logon, but now I want to create in the workbench, but I can't find the metadata tab in the workbench can someone please give me a solution.

  Metadata can no longer be maintained from the Workbench. From memory, it was removed after Version 8 when Hyperion bought upstream.

• How the 'registration' identity can be removed when a computer prepares for recycling?

  How the 'registration' identity can be removed when a computer prepares for recycling?  I'll give my old PC for a facility that reconditions them.  I removed almost everything that could lead to my identity used but I've not found a way to change or remove the name that the software is registered.   Any ideas?   Also how hard disk would be restructured uning windows home?

  Boot from your WIndows installation CD-ROM.  You will be able to erase the hard drive from there.

• How the vCenter vConverter can be activated?

  I use the vSphere update1 assessment. I was told to the enterprise, what Enterprise includs vCenter vConverter version version.

  I'm not sure. If so, how the vCenter vConverter can be activated?

  Thank you!

  George

  Hi George,.

  You can install vCenter Converter by connecting the vCenter Server installation CD to autorun.exe. And then selecting vCenter Converter in the menu.

  Best regards, Robert

• How the battery power can be adjusted to connect and charge

  Original title: battery

  How the battery power may be adjusted to trendy and supported? Power management does not allow chraging battery to mobile.

  Hello Examplaire,

  Thanks for posting in the Microsoft Answers forum! If you could provide the information requested by Thahaseena M, we can better help solve your problem. In the meantime, you can find help from the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How the clip markers can be promoted in chronological markers?  I cut a clip and rearranged the order of the pieces in the timeline panel, so now I want a set of benchmarks that reflect their position in the timeline panel.

  Clip markers have as their frame of reference of the timeline, they came.  If you create a new brand of element in a new timeline, the marker in time is measured from his original script, not the new timeline where he is.  Currently in CC 2015 organization there is no way to translate the clip marker references 'Local' in the 'World calendar"in which they now live.  I captured on video a 8mm film that is chronologically jumble of short scenes.  I placed the chronology of chapter for each scene markers, export the list of markers and finally understood the rearrangement of pieces of scenes he needed to put everything in chronological order.  Thank God for the ability to export the list of markers, just as I needed!  So the whole sequence has 85 chronological markers, dividing the sequence into 5 pieces and rearranging puts them all in chronological order.  Obviously, I don't want to have to restore the scene boundries 85 times, I did as a necessary step to solve the puzzle.  I think you might meet one day some of these problems:

  1. the most obvious thing is located in the calendar for a piece, lift it and 'paste insert' where it belongs on the timeline.  Problem: Lift or excerpt from don't lift or extract chronological markers with it, so when "Insert you a block", the piece inserted in the timeline has lost its bearings, they were left.

  2. How about you make a sous-suite of the segment to move?  Yes, it carries all the tracks, but not the chronological markers whence he came.

  3. ok, I'll export the calendar together with chronological markers and reimport - ah, Yes, success, the chronology of the markers are now item, marks on the imported clip (the entire chronology).  That's great, because the clip markers are sticky with the clip, I can it chop, rearrange to put markers in chronological order without returning any info title marker.  Feeling beat with the reorganization completed five segments of the original timeline, everything is in order, nothing was reinstated, the timeline with its clip of chapter markers is ready to export to still make the DVD!  Yes, you guessed it, element chapter marks are not exported in yet.  The chronology of imports still with a marker, Chapter 1, at the beginning.

  4. There must be a way, stacked the timeline with the time markers on it on the icon for "New"... ', it is the same as #3 above, but simpler.  Historical markers are now the clip markers that don't export in yet.

  From my experiences, it is therefore impossible to solve my problem without completely restoring scene boundries and type chapter titles.  There are two repositories coordinated, clip) 1 local and 2) global chronology; and there is no way to go from one to the other 'mass'.   There is the glove, I'm sure someone has a way to do this without returning the title of chapter 85 markers.

  I have not found an automatic way to do this, but here is an efficient manual method that requires no titles of chapters Overtype.

  Either drop your timeline that has mounted the icon "Create New" brands, or export the timeline and import it back.  You now have a new timeline and markers are now on the video clip.  Now, chop and reorganize this video clip, it is in the best new order, and the clip markers stick with the sections of the clamp.  Now this procedure migrates the markers of the clips to the timeline (promotion):

  Start at the beginning of the timeline, select the video clip. (The video clip must be selected for M to open the marker editing window)

  1. type change M to find the first element brand, type M to open the editing window of clip marker, select the marker title and copy (control-C), hit Cancel

  2 hit the icon of reference in the program monitor pane, which puts a green marker on the timeline at the same time as the brand of element,

  3. double-click on the Green marker, paste the title of marker by control V, select the radio button of chapter markers, click OK.

  Repeat steps 1-3 to promote all the markers of clip of historical markers with the same marker titles.  Since we cut the timeline to reorganize, there are several video clips.  As you progress, make sure that the clip that you are working on is selected, otherwise M will not open the editing window, instead, it will place a chronological marker.  In short, follow this procedure exactly, it works.  It's a stupid job, but it does the job with without having to retype marker titles.  The chronology chapter titles now think time on the new timeline and they will export in yet.  Hope someone finds it useful at some point in the future.

  Perhaps team first see the usefulness of this and add a command 'Promote the clip for mounting marks markers' and "retrograde chronological markers for the clip markers" (conservation type, title and comments).  It would be a powerful addition.

• How the metadata change by Lightroom and another application?

  I often get the message "the metadata for this photo has been changed by Lightroom and another application. Lightroom import settings from disk or replace drive with the catalog settings? "on the images in my catalog. I only use Lightroom to organize, add keywords, basic settings, etc.. On occasions, I take a picture in Photoshop to work more, it is exported in a TIFF or PSD file and the original stays in the catalog LR blank any other thing I could do to the image.

  I have two choices with this message: settings to use Lightroom, OR crush them to disk. The first time it has scared me, as I had no idea where these changes were and why the disk file was something different that lightroom catalog. I have all my metadata stored in XMP files. But I took the chance and said: replace the LR settings and didn't change anything on the sliders or the displayed image. I then tried a little saying 'Keep the LR settings', and again, I didn't see any visible signs of changes. This leads me to believe that they are NOT changed but things LR, they are somehow. But I do not see it, I want it to go away unless there really changes happening outside of LR (as if I went to the bridge or something...)

  Any ideas why this message? I just discovered approximately 100 images in a collection of images, I sent to the Agency in stock three years ago and have not done something with them outside LR since.

  Thanks for any help you can give.

  Users have complained for years about the fake notifications of metadata has changed.  If you are convinced that you do not change the file itself outside LR, then choosing settings Overwrite will rewrite the metadata in the file with the metadata for catalogue and (usually) to make the fake notification disappear.

  Unfortunately, LR does not tell you the metadata fields have been changed, so that users are left flying blind.  In my opinion, Rob Cole had a plugin that will tell you the metadata for the differences between the catalog and the disk file, but its Web site has been down for a couple of weeks now.

  ManiacJoe: My guess is that Photoshop updates some fields of EXIF data in the raw, for example the "edited with the software" file field. Given that Lightroom has probably already established in this field, it gives you a warning that something has changed.

  Interesting hypothesis.  I just tested with LR 5.7.1, Photoshop CC 2014, OS X 10.10 and could not reproduce the problem.  I have exported a TIFF file to a raw file that is catalogued in the same folder as the raw, TIFF edition and changed some of its metadata in Photoshop, and saved.  LR didn't report a notification of change-a metadata.

  In general, I'd be surprised if you changed x.tif in PS, it would change all the metadata in x.cr2 or x.xmp (moderately).

• How the proxy service can get the client certificate in Oracle Service Bus

  Hello everyone, now I'm confused in how can get service proxy client certificate in Oracle Service Bus. I have configured bidirectional SSL in Weblogic, the client sends its cerficate to Weblogic and Weblogic checks this cerficate if have access permissions Weblogic, but my proxy service cannot obtain this certificate to do more work, who can help me?
  And my proxy service service type is the messaging service.
  
  Thank you!!!
  Sea

  Hi, if you have configured for client certificate authentication, weblogic maps an attribute in the DN of the client certificate to a user of weblogic security realm. The attribute is controlled by the default configuration to map the user in the default identity asserter in the WLS Console--> security--> kingdoms--> suppliers--> default identity Asserter. Generally, the CN attribute is selected for this purpose. You must also create a user in the security field, with the value of this attribute in the client certificate for authentication to succeed. Once the authentication is successful, the user is used as the authenticated user. So if you want to set permissions for authorization on the proxy, you can do it based on this user. For this you need not the certificate of the client. In the pipeline of message, I guess you can get the authenticated user of $inbound, which in turn corresponds to an attribute in the DN of the client certificate.

• How the parameter values can be passed to OBIEE reports of the user interface

  Hello
  
  Does anyone have an idea on how to pass parameters to the UI (user interface of a java application) to
  OBIEE report page. Based on the value of the parameter passed, the report page should be displayed for ex: the product
  name must be selected in the user interface, then the page of the report must show sales for this product
  Alone.can u please let me know how this can be achieved. Any help would be appreciated.
  
  Thank you
  Leela

  Hi Leela,
  What you're looking for can be accomplished with GO URL, see here:
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyWebAdm/AnyWebAdm_APIWebIntegrate6.html#wp1005251

  Kind regards
  Alastair

  Published by: AlastairB_UK on October 26, 2009 15:27

• How the physical machine can communicate with the virtual machines as well as the internet should work on a virtual machine

  Hi team,

  I ask that you forgive for asking a silly question without doing a free search.

  I'm using VMware workstation 6.5. I am able to communicate with both machines by selecting 'only option of home. "

  Is there a way by which the physical machine can communicate with the virtual machines.

  At the same time through the VMS, is it possible to access the Internet from the physical amchine.

  Help, please.

  Concerning

  Sriapti

  When you use a bridged vNIC the customer acts as any other host, so that you can access is by his IP (or name if a DNS configuration exists as you acceding to any other host.) What tools you can use depends on the guest operating system and the software available.

  I assume you mean access deskopt. Then you can use RDP (Windows Terminal services) or VNC (tight/tiny).

  For Linux, you can use this last or all the flavors of SSH. In the case of Linux, I use VNC through SSH tunnel. You can also tunnel X through SSH, so if you have an X server on another host (such as the Hummingbird for Windows), you can open your own office remotely there.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• When I select 'new tab' in firefox 4.0, the new tab is NOT filled with my homepage?

  Dear Sir or Madam,

  In the extreme precise:

  1. Select a 'homepage' by using the menu options include:

  1.1. the tools
  1.2. the options
  1.3 home page

  2. in ff3.n, I select a new tab using the menu options include:

  2.1 file
  2.2 new tab

  Result: New tab is populated with a homepage

  3. in ff4.0, I select a new tab using the menu options include:

  3.1 file
  3.2 new tab

  Result: New tab is populated by Blank

  Workaround solution:

  I click left button top right ff4.0 homepage

  Request:

  I will be grateful if the version 3.n feature may be communicated to 4.0

  Yours faithfully,

  Firefox is a never has a feature of loading your homepage when you open a new tab. Your previous version must have an installed extension that adds this functionality to Firefox.

  New tab homepage extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/777

• I can't find the firefox tab can show you how to get it back thanks

  where is the firefox on my tool bar tab that he used to be in the upper left corner now her party thank you

  29 of Firefox and later versions have the interface Australis which seems different from the UI in Firefox 28 and older versions.

  • With the interface Australis orange Firefox menu button has been replaced by the three Menu of Firefox button at the right end of the Navigation bar on the bar
    A consequence of this new menu button is that you can no longer hide the Navigation toolbar
  • There is a star as the button at the right end of the search bar on the Navigation toolbar to bookmark the current web page and a "Show bookmarks" button next to it to open bookmarks in a menu drop-down
  • It is still possible to have the bar of menus visible through the context menu on toolbars to have menus like the bookmarks menu

  You can watch the classic extension theme restaurateur restore some features that has been lost with the arrival of the Australis style in Firefox 29.

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
  • You can check the settings of the extension of the CTR through the Options/preferences button on the page "Firefox/tools > Modules > Extensions.

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox
  • http://forums.mozillazine.org/viewtopic.php?f=38 & t = 2824649

• Whenever Firefox is running the 1st tab is "subject: sessionrestore" with an error message when its judgment. How can I delete it?

  2nd tab is my default and everything works fine.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!