How the value entered Parm on BTF master App subsystem - jdev 11.1.2.3

Similar Questions

• See the value of zero instead of "the value entered does not match the format of the field [].

  I use the simplified notation filed to perform subtraction on a budget form.

  They all have an excellent work and have no problem display a value of zero when it's a simple subtraction (value1-value2).

  However, on my last field I want to take the total income and subtract what I spent (approximately 40 fields) and get a balance zero.

  When I try to do it I get this warning "the value entered does not match the format of the field [].

  The calculation works fine and displays the correct value for all the foregoing ".» 01 "and displays negative numbers. 01 "and underneath as well (if I go on the budget), she just may not show a zero, which is my goal for this equal to zero each month.

  I tried to watch if the forms and have not found an answer that works even for my situation.

  
  Happy to post the form here, just do not know how to do it.

  Thanks in advance,

  The custom calculation script may be something like the following:

  Get the value of field of income, as a number

  var v1 = + getField("Income").value;

  Set up an array of domain names

  var aFieldsToSubtract =]

  "ThithesB,"

  "TailleB,"

  "EFundB,"

  "MortgageB,"

  "HomeItemsB,"

  "HomeRepairsB,"

  "ElecticB,"

  "GasB.

  "WaterB."

  "SewerB,"

  "TrashB,"

  "PhoneB."

  "InternetB."

  "AutoInsB,"

  "UmbrellaB,"

  "IdentityB,"

  "CosmeticsB,"

  "ToiletriesB,"

  "PocketEBB,"

  "PocketCBB,"

  "GiftsB,"

  "HouseSuppliesB,"

  "PersonalOtherB,"

  "PersonalOther2B,"

  "GroceriesB,"

  "RestaurantsB,"

  "ClothingB,"

  "CarGasB,"

  "CarRepairsB,"

  "CarOtherB,"

  "MedicalBillsB,"

  "MedicalOtherB,"

  "EntertainmentB,"

  "VacationB,"

  "DebtCarB,"

  "DebtStudentLoan1B,"

  "DebtStudentLoan2B,"

  "DebtStudentLoan3B,"

  "DebtCreditB,"

  "DebtOther1B,"

  'DebtOther2B '.

  ];

  Subtract the values in field

  for (var i = 0; i)< afieldstosubtract.length,="" i="" +="1)">

  v1-= + getField(aFieldsToSubtract[i]).value;

  }

  Set this field value by rounding the result to the nearest

  Event.Value = util.printf ("%.2f", v1);

  Do not think of this as a band-aid, think the correct way to perform the calculation, because it is. Note that "Thithes" may be a spelling error.

• dynamic sum of the values entered into the Web page

  Hello

  I have a question I want to display the total sum of the values entered in the web page

  Suppose I have 3 fields

  If I enter 10 in the first field, it should consider other value two field 0

  and it prints the 10 in total value.

  next register 15 in the second field, then he cosiders 3rd classified is 0 and altogether it prints 25

  like that, I want to display the total values whenever the user enters the value in the textfield

  Hi all

  I found the solution to this blog

  Blog of Anil Oracle Application Framework: Dynamics for summation in advanced table

• The value entered does not match the value in the field

  I have a simple form on the page, a field callculates a percentage based on the values entered in 2 other fields, works very well, but then all the entries on the form generates this message "the entered value does not match the value in the field".

  Also, you can remove a tab stop of the fields?

  Just happened again.

• Error message - the value entered does not match the Format of the field

  I get an error message in Adobe Pro x: "the value entered does not match the format of the field [JF13].

  I have JF13 scheduled as follows:

  Calculate tab:

  If (Number (this.getField("ck4").value) > 0) this.getField("JF13").value = Number (this.getField("FL019").value); else this.getField("JF13").value = "";

  It is programmed in this way, so if the user checks the checkbox in front of the field, only then will JF13 fills a value, which pulls of FL019. I also value parameters 'number' because the data to display in the form of a dollar amount $xxx.xx.

  FL019 is a hidden field on the form which takes an amount of a central computer and its settings can also be programmed to 'Number':

  I get four popup windows with the above mentioned error message, and the only way to make the stop message is to remove the «number» field format. However, when this is done, if a number any ending in a zero is entered, it cuts the zero. This is not acceptable either.

  Is there some kind of script that I could add or otherwise to prevent the error message and the cutting out of the zero on JF13?

  I'm not very proficient with javascript, any help would be appreciated!

  Just include the two quotes, not the comment brackets.

• How the values to insert into the table with the command insertion

  Dear all
  can someone tell me how the values to insert into the table with the command insert, I want to say I always use command insert behind my forms on what shutter release button press the button of my save, but today I had a form of 6i, where controls (textbox, combo, etc.) are delineated with directly the table with I guess than the Properties Windows , I created 3 columns in tand 3 text on forms fields, now kindly tell me how to do this fields to fill and do not insert command, I mean directly defined with table column
  
  
  
  Please help me its urgent

  Hello

  If the block is based on your database table, just committed the shape, then changes will be applied to the database.

  François

• "The value entered does not Format of the field.

  If something similar has been posted, I apologize! I tried to look for it and has not been able to find the answer.

  I have a form to determine the potential savings, if a customer makes our products to a competing product. Our sales staff filling in many areas that allow us to determine the annual cost that the customer currently committed, as well as the potential annual costs associated with our product. At the bottom of the page, using a simple calculation JS, it determines annual dollar savings by changing brands.

  I would also like to include the annual savings as a percentage of current costs, but for some reason, I cannot get the script to work. The error message that appears indicates: "the value entered does not match the format of the field [annual percentage savings]."

  Now, the two fields referenced in my script are formatted in dollars, so I don't know if this makes a difference or not. My script is below.

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;
  var y = this.getField("Cost_Per_Year_Current").value;
  F.value = Event.Value / y.value;

  If (y.value < f.value) event.value = ";

  Given the percentage is not strictly necessary, but it adds to the form, so that any help would be appreciated.

  Thank you!

  Post edited by: MelissaZoller (format)

  I would use:

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;

  var y = this.getField("Cost_Per_Year_Current").value;

  If (y<= 0)="" event.value=''>

  else {}

  Event.Value = f / y;
  If (y< f)="" event.value=''>
  }

  In this way there is no division by zero or a negative number.

• How to pass the value entered for the parameter IN a function

  Hello
  I'm new to pl/sql programming.
  The function below is used inside a package and the package is called in visual studio.
  The function uses the input parameters 2.
  Out what "in_report_parameter_id" value comes through the application of service job processor.
  The second IN the parameter values are hard coded into the function.
  I am not able to understand this.
  If the values are hard coded, how to ensure that only the hard coded values are the right ones?
  Please could someone explain?
  I don't really have good idea on how to move the INPUT parameter to the function or procedure
  Is there any nice document that could give me good understanding about what are the ways or types we could transmit values to the input in the subprogrammes parameter?
  
  Thanks in advance.
  
  

  CREATE OR REPLACE FUNCTION get_class_text_str
  (
       in_report_parameter_id IN NUMBER,
       in_which                IN VARCHAR2 DEFAULT 'SELECT'
  )
  RETURN VARCHAR2
  IS
           end_text            VARCHAR2 (50)   := ''; 
           my_class_text_str  VARCHAR2(10000) := '';
           my_class_value_str VARCHAR2(10000) := '';
   
       CURSOR class_text(c_1_text VARCHAR2, c_2_text VARCHAR2) IS
       SELECT c_1_text || report_parameters.report_parameter_value 
                             || c_2_text
                             || report_parameters.report_parameter_value 
                             || '" '
        FROM report_parameters
       WHERE report_parameters.report_parameter_id     = 3690
         AND report_parameters.report_parameter_group  = 'CLASS'
         AND report_parameters.report_parameter_name   = 'CLASS'
   GROUP BY report_parameters.report_parameter_value
   ORDER BY CAST(report_parameters.report_parameter_value AS NUMBER);
   
  BEGIN
  
       IF (in_which = 'SUM') THEN     
    
            OPEN class_text ( 'SUM(NVL("Class ', '", 0)) "Class ' );
      
       ELSIF (in_which = 'PERC')THEN
    
            OPEN class_text ( 'ROUND((("Class ', '" / "Total") * 100), 2) "Class ' );
            end_text := ', DECODE("Total", -1, 0, 100) "Total" ';
      
       ELSE
    
            OPEN class_text ( 'SUM(DECODE(bin_id, ', ', bin_value, 0)) "Class ' );
      
       END IF;
   
       LOOP
            FETCH class_text INTO my_class_value_str;
            EXIT WHEN class_text%NOTFOUND;
   
            my_class_text_str := my_class_text_str || ', ' || my_class_value_str;
       END LOOP;
   
       CLOSE class_text;
    
       my_class_text_str := my_class_text_str || end_text;
   
       RETURN my_class_text_str;
       
  END get_class_text_str;
  /

  Published by: user10641405 on November 19, 2009 08:16
  
  Published by: user10641405 on November 19, 2009 08:30

  This is not a conception I would use, but should work if coded correctly. I would probably create a reference text cursor query and use a fetch of open and close.

  You have 2 input parameters, in_report_parameter_id and in_which. I could not find where in_report_parameter_id has been used in the program, but the value passed to in_which is used in the logic of the FI to decide on opening the cursor. After the cursor is opened lines are to be read and possibly the cursor is closed.

  The in_which values are compared to the are hard-coded. It is the programming interface to ensure that the values are the values and the measures taken are also correct. Your program is assuming that if the first 2 values are not met the third listed is the one you want.

  To pass values of entry in a procedure you simply provide the values as a literal or something like variable in the call,

  whatever := get_class_text_str(1,'SELECT');
  

• Validation on the value entered for the attribute-based LOV

  Hello

  I use R12 and created an integrator based on a Table based on a table of seedlings open interface. I use an approach that does not involve PLSQL since the Integrator is based on a Table on a table of seedlings open interface and I have so defined it an importer to call a simultaneous program seeded import. I also put in place a LOV component on one of the attributes in the interface.

  My question is, if in the spreadsheet, the user double-click in the cell LOV to extract, and then select a value (for example if they are in copying and pasting quite a few records if they manually type a value) and the value you entered don't is not one who belongs to a group of data from the LOV, this would raise a validation error when loading?

  In this scenario, I would LOV to serve as a validation check to ensure that users can choose only one value that would be in the LOV, even if they have not actually open the popup LOV and selected a value there. I have some research which I would probably need to validate the data against and because my approach is purely a non-PLSQL that I think the best way to achieve this.

  Appreciate your help as always

  Concerning

  Not to worry, I think I answered my own question by developing a little proof of concept.

  As expected, you can enter values that are part of the DataSet LOV. Enter any other value will highlight the line as an error line asking the user to enter a valid value.

  Thank you

• What is the value entered screen in PAY_ELEMENT_ENTRY_VALUES_F

  HIII...
  
  What is PAY_ELEMENT_ENTRY_VALUES_F of value for the screen?
  How can I find out the value for an element for all employees?
  No clue pls?
  
  Guru

  Hi guru,.

  Provide the query will retrieve results from the value stored in the entry of the item and do not run the results.

  Thank you
  Sanjay

• update of the value entered in the report to the table item

  Hi all
  
  
  I want to change the dnom report... and wt never dept I checked shud update the db...
  
  
  
  I've created a report in the
  
  Select apex_item.checkbox(1,deptno) "Select", apex_item.text(2,dname) "dname" of the Department;
  
  
  and submitt I m writing a process as
  
  
  Start
  BECAUSE me IN 1.APEX_APPLICATION. G_F01. COUNTY
  loop
  update the set dname = apex_application dept. G_F02 (i) where deptno = apex_application. G_F01 (i);
  
  -I want to update the text entered in the table report.
  commit;
  end loop;
  end;

  Hello

  You get an error? Or how it will not work?

  BR, Jari

• To check the value entered

  Hello
  
  I want just to validate the value specified for the text element. (if it is a number or not)
  
  This type of text element data is of type Char (because the value of corresponding database is 'VARCHAR'. I do an insert with this value).
  But I make sure data enter so that the text is point number.
  
  Version: Forms Builder (9.0.4.2.0)
  
  
  Rgds
  
  
  sexy

  What do you get the error...

  Maybe it helps

  ORA-12801: error reported in the P001 parallel query server

• How the value for several variables using a single guest

  Is there a way to put more than one variable with a single guest?
  for example, the value @CurrentYear and @PasteYear using just a single guest for @CurrentYear.
  
  A clue?
  
  Thank you
  
  Luke

  Using variables to repository you can set like this.
  Check this link http://gerardnico.com/wiki/dat/obiee/set_variable

  If brand pls help

• How can I change the background color of textField2 based on the value entered in textField1(Acrobat DC)?

  Could you please help me solve this problem (I'm new to adobe acrobat cc):

  JavaScript written in textfield1 (Color1) - Actions:

  var C1 = this.getField ("Color1");

  var S1 = this.getField ("Swatch1");

  Switch (C1.rawValue)

  {

  case "PMS 100":

  S1. Border.Fill.Color.Value = "0,174,239";

  break;

  case "PMS 101":

  S1. Border.Fill.Color.Value = "236,0,140";

  break;

  }

  Hello.

  You can use this JavaScript (not tested) as a calculation script in the textfield2:

  var myField = this.getField("textField1");
  if (myField.valueAsString == "AAA") {event.target.fillColor = color.red;}
  else if (myField.valueAsString == "BBB") {event.target.fillColor = color.blue;}
  else if (myField.valueAsString == "CCC") {event.target.fillColor = color.black;}
  // etc.
  

• How the value of variable Page of Backing Bean

  Hi all

  New on ADF trying to access page variable value to a BackingBean (scope wonders).

  I tried this approach but does not work, I do not know how to solve.

  My ADF page is filled by a VO.

  It is the ADF page code:

  < af:panelLabelAndMessage label = "Name" id = "plam8" >

  < af:outputText value = "#{bindings." Name.inputValue}"id ="ot7">

  < / af:outputText >

  < / af:panelLabelAndMessage >

  < af:panelLabelAndMessage label = 'Start Date' id = 'plam8' >

  < af:outputText value = "#{detailBean.startDate.inputValue}" id = "ot8" / > "

  < / af:panelLabelAndMessage >

  This is the piece of my BackingBean where I need to read my element value and the format in right way and then push it down on the page of the ADF:

  private String startDate;

  public String getStartDate() {}

  StartDateXD = (Date) resolveExpression("#{pageFlowScope.startDate}");

  If (startDateXD ! = null) {}

  In the date format = new Date (startDateXD. getTime());

  SimpleDateFormat newFormat = new SimpleDateFormat("dd/MM/yyyy");

  startDate = newFormat.format (formatted);

  }

  Return dataSds;

  }

  Is someone coulfd help me?

  Thanks for your help.

  Fairlie

  Yes, you can use af:convertNumber to convert currency. Check Ashish Awasthi (Jdev/ADF) Blog: change of af: convertNumber Format according to the regional settings - Oracle ADF for a sample.

  Timo