If I re - install Windows 7 Premium (Vista is the original) is very unusual that I have to watch it?
Volumn Shadow Copy Service Componet error 0 X 80042302 (Windows 7)
If I re - install Windows 7 Premium (Vista is the original) is very unusual that I have to watch it?
If the reinstall is successful then can I re - install my files and photos of my click-free backup hard drive or do I have to drag over the old Windows?
Thanks for any help!
Phil C
You can make one in place-setting day (repair install) using the dvd. Who reinstall Windows, but does not remove your programs, drivers and files. You should back up your data first just in case.
The dvd must be equal to the same service pack level or higher than the windows that you fix. Check the label on the dvd to see if includes a service pack. If this isn't the case, you must uninstall service packs on your system before you begin. Subsequently, you will need enable back again to Windows Update.
Start the in place--update by inserting the dvd while the office is running. Click on install now on the start screen, enter your product key when asked and choose install upgrade when the Setup Type selection screen appears.
Until you do, you can run the System File Checker, because it can replace the files with the right that are cached on your damaged system. Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane. Select run as administrator. When the cmd window type "sfc/scannow" at the prompt and press ENTER. When the scan is finished, close the cmd window. Reset. That can solve your problem without having to reinstall. It can not but its worth a shot.
Tags: Windows
Similar Questions
-
I bought my new laptop in 2006, yes I know this is old, and never noticed that on the bottom was a trial for windows xp home edition key. What is this for? How to use it?
That's when you need to reinstall Windows and when the manufacturer installs Windows XP on your system.
-Gonow32
-
I have Vista Home Premium sp2 and you want to install Windows Defender, but however Gets the 08x800106ba error message.
Where should I go from hereHello
You cannot install Defender in Vista; It is already part of the Vista operating system.
Read about Defender:
If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.
There is nothing to worry.
Using both programs at the same time can cause system conflicts, etc.
If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):
"Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.
Right click and select Properties , ensure that Startup Type is automatic.
Once modified, click apply and OK.
Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"
.
If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
And for now, change startup Vista programs without using Defender, use one of these methods:
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
-
I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:
"Windows Setup could not configure windows to run on this computer hardware."
I then click OK and then this message:
"Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »
I have computer knowledge very very basic.
Please help me!
Thank you
Hello
You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.
You can also try the Forums of HP Support for assistance.
See you soon.
-
I have a computer with Windows Vista. Last summer, I bought the upgrade to Windows 7 Home premium and installed. I have now a problem which requires me to re - install my system. Once I have restore my system to the original system can re - install windows 7 with the disc that I used before. the box says for use on a single computer. I wanted to know before you start to restore and to know that I buy windows 7 again. Thank you
Hello
the license is yours
Reinstall vista, then make the same upgrade to windows 7
This message is to do with a permit
one license = installation on one machine
This is to ensure that you don't think that it can be installed it on 6 computers at the same time!
If you have problems, reactivation, which you shouldn't, keep this practice
read below the link on how to activate vista
How to activate Windows Vista
http://support.Microsoft.com/kb/940315
If you have any problems, follow these steps.
1. click on start and in the search for box type: slui.exe 4
2. press enter on your keyboard
3. Select your country.
4. take the phone activation option and brace yourself for a real person instead of the automatic fast process
· When you do the phone activation process hang to a real person explain to, instead of the following prompts for automatic scenario
-
No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home
No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?
Thank you. This site help me solve my problem.
-
I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type.
- I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type. He
How can I fix t?Thanks for a much improved product.This thread is perhaps relevant: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3b935c1e-9c66-4236-93e8-b3356bfbb7c7 TaurArian [MVP] 2005-2010-implementation to date of Services
-
I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista
Hi, CPC,.
Welcome to the Microsoft Answers Community!
You must install Flight simulator on vista as well as Windows Xp and vista are two different operating systems.
You log in to vista, you may not use any of the XP application and vice versa.
Thank you, and in what concerns:
Azeez Nadeem
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you -
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
Hey PeLon416
If you have problems with the gateway recovery process, you will need to contact Gateway
It's their recovery process not microsofts
You may have a hardware problem
support of bridge at the link below
http://support.gateway.com/support/default.aspx
Walter, the time zone traveller
-
Hello
I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.
The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION
When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.
How can I get out of this loop please?
Thank you.
Lucie
Hello
For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.
This recovery process is the manufacturer, not Microsoft.
________________________________________________
You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.
See you soon.
-
Install windows 7 on vista on my hp computer
Get the error message. The computer started re in an unexpected way. Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. I did it several times and I always get this message
Hello
Are the upgrade from Windows Vista to Windows 7 or do a clean installation of Windows 7?If you don't have any concerns of data, I suggest you to format the hard drive before installation and then install.For more information, please visit the link given.
Installation and reinstallation of Windows 7: http://windows.microsoft.com/en-US/windows7/Installing-and-reinstalling-Windows-7
-
Install Windows 7 to Vista Ultimate Unit disc.
Install Windows 7 to Vista Ultimate Unit disc. The page in the installation of "search updates installations" spans more than AN hour. Is this normal?
Apply update rollup convenience following manually:
http://support.Microsoft.com/en-us/KB/3125574Restart your computer, and then try again.
-
Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears
"Windows is unable to complete the installation. To install Windows on this computer, restart the installation.How should I solve this problem?Hello
1. may I know the exact error you received during initialization failed prior to relocation?
2. do you know the exact reason for the failure of start?
I will be asked to get in touch with the manufacturer of the system on this issue.
Installation and reinstallation of Windows Vista, you can fallow the article below:
http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3
-
I can install Windows 7 without initially providing the product key?
Peut I install Windows 7 without initially provide the product key during installation? I'd rather go once the installation is finished, I just have to copy and paste it in the email like that.Hello
Yes, you can try a free key of Windows 7 Installation. But be sure that you enter the product key to activate Windows wihtin 30 days grace period. Once the 30 days grace period end your system will go in any safe and you may need to reinstall the copy again.
Unlike Windows Vista, if you si vous achetez buy Windows 7 DVD you get specified edition disk and installation you will not get an option to select the edition. Almost to the last step of the Installation, you will get the opportunity to enter the product key that you can jump and try to enter the product at the time of the Activation key.
Thank you
Hamidou ndiaye -
INSTALLATION OF WINDOWS FOR THE FIRST TIME
Hi, I am using the windows 7 Home premium with Sony Vaio netbook. This message appears when I've been windows installation since it is newly purchased, "Windows could not complete the installation. To install windows on this computer, run the Setup again"when I click ok, and then the computer restarts automatically and then come back to this message. I reboot several times but the result was always the same. Home premium to Windows 7 has been with the netbook already, so I don't have the Disc... can someone help me solve this problem? Thank you very much
My colleague has had a similar problem when she came back to the States with a new Vaio from Sony, I didn't just run recovery and reinstall Windows and its worked good since. She even gave me a hug for fixing.
The problem seems to be the OOBE which would suggest its more hardware than windows, but I understand your nature, you want to be right about everything.
Maybe you are looking for
-
Cannot add photos to my Gallery of photos from my PC
Tonight I have successfully downloaded a picture from my PC to my photostream (clicked right on the photo/add to the shared album). Went to charge a second picture and all of a sudden cannot download any photo to any photostream. It manifests and all
-
Unable to modify a VI after the execution of TestStand sequence
If I open a VI after the execution of my order, it cannot be edited. I assume that it is loaded in memory and ready to be run again. What should I do? Normally, I close LabVIEW and open it again. There must be an easier way. Thank you CT
-
I set up my wireless router Linksys and used the WEP option. Is there a difference between that and WPA2personal. When I look at my security settings on my TIVO it shows security: WEP Configuration open. It does not require typing in 26 hexadecimal
-
Drag down to an upcoming event in the hub
In Blackberry Hub, you can drag down to see the upcoming events. Could you let me know who will provide an API allow to slide the bottom of the feature to view additional items similar to the Blackberry Hub slide to the bottom of this upcoming show?
-
Web Auth certificate. PEM format
Hello I try to put a web on my controller authentication certificate and I am unable to do so. When I click on the 'Help' button on the controller, it says the certificate must be in. PEM format. The certificate I is just in .txt format, how can I co