How the world to digitize documents no pictures?

Similar Questions

• How the world do you do that?

  I am trying to the external text in the form of headlines and paragraphs. I want to create text boxes of the paragraphs that match exactly the number of lines, it will take the paragraph. I want to do so that when I place them in a vertical line I can space evenly.
  
  If I just create a text a certain box size, text only ends up being 1 line and allows the text box I created for 3 lines and then the space between the paragraphs with less than 3 lines is much more. Is there a way to create a text box based on your text and not size?
  
  Thank you

  You can use the textfields autoSize property. for a multiline textfield, you will likely want to specify its _width, set its text property, activate its property autoSize (real or 'left') and you can then use the textfield _height to position the next textfield below him.

• I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image.

  Original title: HELP! Problem 'open with '.

  I also have a problem of 'Open with', that has happened before. I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image. Even the new emails are now coming this way. How can I get rid of this or the reverse?

  Hi Patti Gunderlock,

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

   

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

   

  Method 2: If the method above is not enough, then you can follow the steps described in the article and check.

   

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Let us know if that helps.

• error code while trying to open the photos include JPEG and BMP files: C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

  If you open a directory of photos and go to the thumbnail view in Explorer, they display the thumbnails correctly?
   
  I think that you need to reset the file association for programs that open the image files.  Try a right-click on a jpeg file and go to properties and click on the button to edit, and then designate PS elements 8 as the top program open with, and then see if it works very well.
   
  You can also check the settings in the registry for the types of image files.  Seewww.oehelp.com/noimg.aspx , which deals with a related issue.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

• Where can I find THE "SEND TO" folder (which has things like < Office create a shortcut >), so I can add add my own send to options that is send to my documents - my pictures.

  Where can I find THE "SEND TO" folder (which has things like < desktop="" create="" shortcut=""> ), so I can add add my own send to options that is send to my documents - my pictures.

  This isn't how it's done.  There is such a file, but customizing the send option in the context menu is a little more complicated that just add entries to this file.  Here is the procedure:http://www.vistax64.com/tutorials/67599-send-context-menu.html.  In fact, if you are interested in adding move to a folder or a copy of a folder specifically, the following article may be also useful: http://www.vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.html (even if it would be any folder and you need browse and select which one you want may not be exactly what you're looking for (although know it may be something you also want to add) but the first article will include the ability to add a folder of) specciic to send it to the menu as well as other programs and just about anything you want).

  Also another clue.  The contextual menu has more options you see when you right click on an element to access.  Try to hold the SHIFT key when right-clicking on an item and you will see an expanded list of options that can include something that willl help you.  It does not the question asked you (the first link above did that), but it is linked and I thought that I have it add in case you weren't aware, and where it is very convenient at a given time.

  I hope this helps (I'm sure it will).  A suggestion - be careful how you add to the context menu.  Not that it has a limit or something like that, but add the more you more it will be difficult to find whatever it is you are really looking for.  It is easy to get carried away and end up with a menu that is so crowded it defeats the purpose to save time with shortcuts.  Try only to add the options that you use often enough that the feature will really help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can someone let me know how to print a scanned document. In printing only the 1st page prints fine as I know that there is more than one document.

  can someone let me know how to print a scanned document. In printing only the 1st page prints fine as I know that there is more than one document.  This is the version Adobe photoshop cc 2014.  Someone said it you use printing quick button but who can't find anywhere.

  Carolyn

  Carolyn,

  I don't know if Photoshop is the best solution for the printing of DOCUMENTS scanned.  Photoshop opens a page of a DOCUMENT at a time, let's say you have a MultiPage PDF Document, when you open with the PS, tell him what page you want to open. Once you do, it will convert this page into basically a picture, a raster file that can be edited like a photo.  So if you go to print, it prints only one page, you have open...  So, if you have opened the first page of your document and go to print it, which explains why it only prints the first page.

  So is what file type of the document that you are trying to print?  If it's a PDF file, I opened it with Acrobat/Reader, depending on whether you have and that FILE you > PRINT it like that.   Or is there a particular reason (Lighten/Darken/increase contrast etc...) you are needing to go first to Photoshop?

  Give me a little more information on exactly what you're trying to do and I'll do my best to provide a workflow easier to achieve your final goal.

  I hope this helps.

• How to select a line in a picture of a document?

  How to value an entry in a picture of a document?

  Hmm strange. Try to re - set preferences by going to:

  Edit > preferences > General

  Click on the button to re - define prefs on the next launch.

  Then, close the program and reopen.

• How can I use axis layer against the axis of the world to animate?

  Hi all

  I'm open to other ways to address the issue.

  I am trying to create a sphere using multiple images. Say, 200 images, arranged in 3d space, so they face outward and together form a large sphere. Pretty standard thing (like the sphere glowing apps blue droid in android ads, like this).

  I used red giant PlaneSpace quickly take a sphere. I want to "explode" the sphere for all images to move away from the centre of spheres, but in a staggered and random way rather than all at once.

  I thought it would be easier I see each orientation layers changed each axis of layers. So the layers of the z-axis of the Center points.

  Example:

  

  I tried to use a simple linear expression to update the Z axis over a period of 20 seconds to its current position minus 2000, like this:

  AMT = linear (time, index, index + 20, position [2], [2] position - 2000);
  Transform.position = [position [0], [1] position, amt];

  This updates the position of the z axis, but it is based on the world axis (or axis of the model), not the axis of layers. The axis of layer, I want to talk about is the widget of the axis that appears when you select a 3d layer and the axis 3 widget to see red/green/blue appears.

  How can I get the expression to use the axis layers rather than the world?

  Is there another approach to this? I'm certainly not up-to-date on 3d trig enough to write a formula to chart a course far from a specific 3d point. If all goes well, there is a simple way to do this that I forgot.

  I will add that I have attach all 200 pictures to a null value, scaled to null, and it grows not all photos now. I also added a reverse scale expression to keep them the same size they were initially instead of scaling upwards with a null value. However, I really want to blow way random and not "both" and I need to get out of the null concept for this scaling access to each photo.

  Thank you!

  Unplug the layers of the null value and try this:

  AMT = linear (time, index, index + 20, 0, -2000);
  toWorldVec ([0,0,1]) + value * amt

  Dan

• How in the world does Mac loses its universal as shortcuts CmdC (copy)?

  How in the world does Mac loses its universal as shortcuts CmdC (copy)?

  Lost the feature universal paste. Manually add them back in keyboard shortcuts. They do not work in all programs. If I copy and paste a url in a browser, it is not paste in ANYTHING. What an absolutely frustrating experience! The most common features have disappeared and now they don't work well. Really? Come on Apple! This is not what Mac users are accustomed to Apple.

  Run disk utility to see if the startup disk needs repair.

  You can also try a Safe Mode boot that removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to copy / paste keyboard shortcuts.

• How can I configure Mozilla to accept connections on port "The World Wide Web (HTTP) service"?

  When you try to embed a video in PowerPoint 2013, the "Sorry we are having some problems of temporary service" message.

  In research on the problem to Microsoft. com, the following message is received: Mozilla is not configured to accept connections on port "The World Wide Web (HTTP) service."

  Hmm... PowerPoint must use Windows to connect to the internet and not Firefox.

  What method do you use?

  (1) insert > video > video online

  Apparently, there was an update this month that allows this, as described in this message of support (see the top of page answer right after the question): embedding video in powerpoint 2013 - Microsoft YouTube community online

  Here's how it should work after the update: Insert or link to a video on YouTube - PowerPoint

  (2) developer > control > Shockwave Flash Object

  As documented on other sites, such as: https://www2.palomar.edu/pages/atrc/2013/09/17/how-to-embed-youtube-video-in-powerpoint-2013/

• How can I put my documents folder in the bar of icons at the bottom of the desktop computer

  I have a Macbook Air.  I was wondering how I can transfer my documents folder on my desktop at the bottom of the screen where the other icons are placed?  Thank you!

  Open Finder and go to users > [your user name], and then drag the Documents folder to the right end of the Pier (to the right of the light vertical line).

• When I drag an image URL, such as for Amazon to the dock, changes the image to an image any ordinary of the world.  How can I change this image to the original Amazon icon image when turned on the docl?

  When I drag an image to icon URL, such as for Amazon to the dock, changes the image to an image any ordinary of the world.  How can I change this image to the original Amazon icon image that existed before I moved to the docking station?

  Why do you want to put the URL in the Dock, which doesn't seem like the appropriate place for this.

• I have Pages version 5.6.1. How can I convert a document that I create in this version to an older version (Maverick) of Pages? I created documents in version 5.6.1 and I need for my colleague to open documents, but it has the ol

  I have Pages version 5.6.1. How can I convert a document that I create in this version to an older version (Maverick) of Pages? I created documents in version 5.6.1 and I need for my colleague to be able to open the documents, but it has the old version. I already clicked on 'option' and select 'duplicate' to get the prompt "save under". However, when I do this it does not to choose another version.

  To create a document that can be opened with previous versions of Pages, open the document in Pages, and go to the menu file (in the menu bar)-> export as-> Pages ' 09. Save the file and send it to your friend, if she can open it without any problem.

• ENVY 120 CZ022B: How to print a word document on both sides of the page (MAC)

  How to print a word document on both sides of the page (MAC) I can´t find how do!

  Hello
  Follow these steps to automatically print double-sided in Word print jobs:

  In the file being used to print click the file menu and select print.
  NOTE: The print window might be minimized. Press show details to show all available print option.

  Click Copy Pages & drop doen and select layout.

  Set the duplex option as the binding edge (Portrait) Long or short edge (landscape) bond.

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  Kind regards
  Shlomi

• HOW MANY PEOPLE HAS THE CERTIFICATION MCSE IN THE WORLD

  I WANT TO KNOW HOW MANY PEOPLE HAS THE MCSE CERTIFICATION IN THE WORLD

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  Here are some sources for help.

  Support MCBS
  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx

  Forums and blogs MCBS
  http://www.Microsoft.com/learning/en/us/community/community-default.aspx

  Forums MCBS
  http://www.Microsoft.com/learning/en/us/community/blogs-forums.aspx#public-forums

  I hope this helps.