How to access my settings for later use raw?
I opened a jpg in CR, made some changes, opened the image, then saved (in PS) and closed.
Later, I needed to create a copy of this image and apply the same parameters of CR, I used, but I can't find them. When I opened the original jpg, all parameters of CR are zero.
Is there a way I can access the CR settings that I entered? I want to see what they are, not to delete them, not go back to the step of Pre-cr-edit.
If this is not possible, what could I do differently to retain access to my settings of CR? Should I have saved the image from CR? If so, how the CR settings would be available for tweaking or copy?
Is there an automatic xmp file that would have this info, and if so, where could I find it?
Finally, how to save parameters of CR in the future for the subsequent access?
Thank you very much!
The setting of the slider sat is taken from my jpeg images. I'm using CS4 on a Windows 7 64-bit system. Keep control, something is always wrong on your installation.
Richard Southworth
.
Tags: Adobe Camera Raw
Similar Questions
-
How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated
See if a program was installed for him. Or use something like Skype / instant messaging program
-
How to save custom cultures as presets for later use?
How to save a custom size/resolution for later use culture?
Thank you
Gene
Please follow the steps below.
> Launch Lightroom
> Go to the develop module and click crop
> Click on the drop-down list format to and select enter custom
> Once you click OK, it will get applied and added to the list itself.
Let me know if it helps.
~ UL
-
How can I print my lists of distribution for later use if the drive breaks down?
Had a problem with the hard drive on the new computer. Company reloaded hard drive. Lost all email addresses. Had to manually type in THE addresses again. Is there a way I can save my addresses to disk or print it out on paper for later use if I lose them again?
Open the address book window.
Select tools-export
Select the type of file.
The name of the file.
Choose where to save it. -
I've been messing around with this concept for a few hours and have not yet found anything conclusive. I have a system where I want to store instances of a particular class (private data have a 2D array, a 1 d table, some Boolean values, numbers, and a set of strings.) for later use. The goal is to store a table of these classes for customization purposes. I've experimented with palette OpenG configuration file, especially the "read/write formatted article cluster", but I get some strange errors when I change around the private data and try to save the same instance. I thought using flatten XML vi and the wiring of the array of instances followed by reading in a table, but I anticipate similar problems. What other options are there? TDMS? A SQLite database? Should I do a few other split in the very basic types and combine them with the execution having read in? All suggestions/stories welcome.
LV classes are compatible with the Flatten to Unflatten from XML and XML functions. Have you ever tried this approach?
Norbert
-
Original title: F8 and troubleshooting.
After starting my computer Gateway Profile4 after hibernation, I wonder to continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use? If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.
original title: after waking up from hibernation, he asked me to continue logon or delete restoration data.
Recently, I had this problem. This link above (http://support.microsoft.com/kb/294427) helped me.
Basically, it seems to be a corrupted restore point created to go into hibernation. I think that the system wants to remove that restore point and reboot "fresh."
Restore data refers to a previous restoration or a restore point that was created for later use?
A previous restore point.
If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.
If I understand you correctly, no.
Hope this helps
-Rich
-
Where are stored the mobile drawing Illustrator files for later use in Illustrator Desktop?
Hello
who can tell me, where are stored files from vector to the Illustrator Mobile draw for later use in Illustrator Desktop? In the cloud, there is only the .png and .jpg files. The files are sent immediately to the office, but when I want to use them later, I can not find them more.
There is a file PushToDesktop in the record in support of the Application that contains all the files.
BUT: you can just open in Illustrator. They need to be pushed.
-
How I used Nik Software Plugin Photoshop Creative Cloud? I installed it on my iMac and use it with SP6, but now that I use the version of the CC of the PS, I don't know how to access the Nik. I mainly use SilverEffex Pro for black and white conversion. Thanks for the instructions.
[Left the forum Cloud/Installer generic for program specific forum... MOD]
Hello
Please, go to the folder of the application on your Mac, find the folder of Photoshop CS 6, double-click to open it and copy the folder plugin from here.
Open the Photoshop CC folder which will be again in the application and paste the folder plugin inside. Replace reboot of the CC of the Photoshop file and it should be there
Thank you
-
How can I access the settings for prtscr?
My question is more in what regards... Is it possible to access the settings "PRTSCR"?
PrtScr always seems to be only available in Windows Paint.by using the "Paste" option
If I try to use it in MS Office (using the paste option), it is not available, neither in Excell or even a single Note. I just use Adobe as an example.
Somewhere in that I read that Vista has a feature of multiple screenshot (or not), but I can't seem to find anyway to access the program that it's me so I can put it is available in Office or Adobe or any other program that I need to use it seems.
Hello
I suggest you to check on the lock (locking function) key on your keyboard. Check top right of your keyboard to the F LOCK key, which can be you can use the print screen key. The CAPS LOCK key activates / deactivates the function keys. A function key is a key that has two possible commands depending on the State of the lock toggle keys.
To add, I suggest you try the tool cutting in Windows 7. It can help you take the screen shots easily. You can check the functionality of tool cutting using these items:
http://Windows.Microsoft.com/en-us/Windows7-vistaproducts/features/Snipping-Tool
http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots
Also try the new user account if you are facing problems with Office applications.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
-
How to access the settings from inside, one for each group?
Hi all
BI Publisher, Windows 10.1.3.21
BI Oublisher 10.1.3.21 Office
MS Word 2007
I'm trying to replace the D1, D2,... with P23_DATE1, P23_DATE2... without success.<?xml version="1.0" encoding="UTF-8"?> <DOCUMENT> <DATE>19-MAR-09</DATE> <USER_NAME>DEV</USER_NAME> <APP_ID>122</APP_ID> <APP_NAME>APEX - Application Builder</APP_NAME> <TITLE>FORECAST</TITLE> <P23_DATE>08-02-2009</P23_DATE> <P23_PROPERTY>ACME</P23_PROPERTY> <P23_DATE1>09-02-2009</P23_DATE1> <P23_DATE2>10-02-2009</P23_DATE2> <P23_DATE3>11-02-2009</P23_DATE3> <P23_DATE4>12-02-2009</P23_DATE4> <P23_DATE5>13-02-2009</P23_DATE5> <P23_DATE6>14-02-2009</P23_DATE6> <P23_DATE7>15-02-2009</P23_DATE7> <REGION ID="0"> <ROWSET> <ROW> <OUTLET>SHOP_1</OUTLET> <TOTAL_ROOMS>12</TOTAL_ROOMS> <RM_TYPE>SPA</RM_TYPE> <D1>0</D1> <D2>0</D2> <D3>0</D3> <D4>0</D4> <D5>0</D5> <D6>0</D6> <D7>0</D7> </ROW> </REGION> </DOCUMENT>
Had a consolidation on hold.
Can access the settings, if it is outside the grouping. Looks like one out of the problem of the scope.
Not found similar conditions in the model BI demo and samples.
Appreciate any help.
Thanks in advance
ZackHello
use .. ./../p23_date1?=""?> inside your loop to reference your settings.
concerning
Rainer -
Cannot access the settings defined by using DOM jsx InDesign Mojikumi
Hi all
I use InDesign Japanese version 7.5 on windows 7. I put the withdrawal of paragraph through mojikumi settings and try to access through the jsx object model. Here's what I did:
I created a new Mojikumi set based on default MojikumiTableDefaults.LINE_END_ALL_ONE_HALF_EM_ENUM. What I changed in the new series is "Paragraph Mojikumi Indent" from zero to 1 car. I want to access this java script setting by using its object model. I tried the paragraphObject.mojikumi.overrideMojikumiAkiList of the method that seems to be the method related to access custom settings. The output of the function I get's a great picture.
2.23, false, 1, 1, 1, 0, false, 3, 23, false, 1, 1, 1, 0, false, 4, 23, false, 1, 1, 1, 0, false, 5, 23, 1, false, 1, 1.0, false, 6, 23, false, 1, 1, 1, 0, false, 21, 23, false, 1, 1, 1, 0, false, 7, 23, false, 1, 1, 1, 0, false, 8, 23, false, 1, 1, 1, 0 , false, 9, 23, false, 1, 1, 1, 0, false, 10, 23, false, 1, 1, 1, 0, false, 11, 23, fake
, 1,1,1,0, false, 12, 23, false, 1, 1, 1, 0, false, 24, 23, false, 1, 1, 1, 0, false, 25, 23, false, 1, 1, 1, 0, fal se, 18, 23, false, 1, 1, 1, 0, false, 33, 23, false, 1, 1, 1, 0, false, 28, 23, false, 1, 1, 1, 0, false, 29, 23, fal, 1, 1, 1, 0, false, 30 , 23, false, 1, 1, 1, 0, false, 31, 23, false, 1, 1, 1, 0, false, 32, 23, false, 1, 1, 1, 0
, false, 1, 23, false, 1, 1, 1, 0, false, 26, 23, false, 1, 1, 1, 0, false, 27, 23, false, 1, 1, 1, 0, false
For custom Mojikumi set created from MojikumiTableDefaults.ONE_OR_ONE_HALF_EM_INDENT_LINE_END_UKE_ONE_HALF_EM_ENUM, with "Paragraph Mojikumi Indent" default 1 char against zero value will give the following table;
1.23, false, 0, 0, 0, 0, false, 26, 23, false, 0, 0, 0, 0, false, 27, 23, false, 0, 0, 0, 0, false, 2, 23, false, 0, 0,0,0, false, 3, 23, false, 0, 0, 0, 0, false, 4, 23, false, 0, 0, 0, 0, false, 5, 23, false, 0, 0, 0, 0, false, 6, 2, 3, false, 0, 0, 0, 0 , false, 21, 23, false, 0, 0, 0, 0, false, 7, 23, false, 0, 0, 0, 0, false, 8, 23, false, 0, 0, 0, 0,.
false, 9, 23, false, 0, 0, 0, 0, false, 10, 23, false, 0, 0, 0, 0, false, 11, 23, false, 0, 0, 0, 0, false, 12, 23, f alse, 0, 0, 0, 0, false, 24, 23, false, 0, 0, 0, 0, false, 25, 23, false, 0, 0, 0, 0, false, 18, 23, false, 0, 0, 0, 0, false, 33, 23, false , 0, 0, 0, 0, false, 28, 23, false, 0, 0, 0, 0, false, 29, 23, false, 0, 0, 0, 0, false, 30,.
23, false, 0, 0, 0, 0, false, 31, 23, false, 0, 0, 0, 0, false, 32, 23, false, 0, 0, 0, 0, false
While the same value unchanged, that is to say with a withdrawal of paragraph 1 char will give on the small table below:
1.23, false, 1, 1, 1, 0, false, 26, 23, false, 1, 1, 1, 0, false, 27, 23, false, 1, 1, 1, 0, false
These values, in a deterministic way finding one that corresponds to the removal of paragraph mojikumi? The size of the table also seems to change as we add or alter values of replacement for different mojikumi sets. If its definitely not based on array index.
Description of the API says:
overrideMojikumiAkiList Table of
akiDoesNotFloat:Boolean
compressionPriority:Short Integer
wanted: real
maximum: real
minimum: real
Ordered the array containing targetMojikumiClass:Short, Integer
sideIsAfterTarget:Boolean
sideMojikumiClass:Short Integerr/w The mojikumi set overrides for aki. Can return: ordered array containing whole targetMojikumiClass:Short around sideMojikumiClass:Short, sideIsAfterTarget:Boolean, minimum: Real, desired: Real, maximum: Real, whole compressionPriority:Short, akiDoesNotFloat:Boolean. I tried to post in the Japanese forum of InDesign. I want to just try my luck here.
Indications for help links or ideas on how to decode the matrix above deterministically for all games mojikumi will be a great help for me.
Thank you
Srikanth
Hello
Here's a link when...
I get different custom and default configuration
http://www.milligramme.cc/WP/archives/537
and get applied in the further document mojikumi games
http://www.milligramme.cc/WP/archives/3368
I hope that you find it useful
Thank you
mg.
-
Effects: how to call the "settings" for individual filters
I remember in earlier versions of PE, when I applied an effect to a photo (artistic, blur, noise, etc.), there was a bar of tools/dialog box that would allow me to set unique settings for each effect. Now, in PE 9 (for Mac), I can't understand how to access these parameters - they do not automatically appear when an effect is selected and I can't find the place where to turn this 'on '.
I've searched and searched and searched for this, but may not know how to do this.
Thank you!
If you want filter dialog boxes when you use the effect controls panel, click
on the little arrow facing downwards (highlighted in red on the screenshot below)
and click on automatically see the filters Gallery (shows the filter dialog boxes).
MTSTUNER
-
2 How to save the settings for all users.
I recently had to move the hearing to a vista machine.
Now, the Setup is a slight pain in the * mainly because of Vista in Vista.
But now that I put it in place under my profile how can I keep those settings for all users?
When a new person connects to this computer, it goes to the built-in default material (which of course didn't is not connected to anything) and not to the sound card that is connected to the mixer.
So what I'm after, is a way to save all settings (including workspaces) and their default for all users (including users)
(Please tell me there's a way to do it...) Having to configure AA for each trainee or a guest is going to be an incredible pain in my *.)
Thank you.
Audition CS6 and later have the opportunity to create "Machine-specific device settings" that replace a users roaming profile preference files when you connect to jobs at random, but cela was not available in Audition 3. There may be solutions workaround, depending on your network configuration, but nothing as nice and direct.
-
How to access Oracle Applications 11i forms using Vmware Player?
Hello
I installed Oracle Applications 11i on native OS OEL5 Server and guest OS Windows XPP using Vmware Player.Now how to access forms Oracle Applications 11i XPP Windows using Vmware on my desktop to server OEL5?
Thank you to
The respect of
RerryHello
If you mean how to access the e-Business Suite from the virtual machine, and then you just navigate to the same URL as you would normally. You may need to put the alias of the machine in your hosts file if you reference it via the name of the computer rather than the IP address.
If you mean you want to load the form in the form designer (for example) then you will need to FTP the form from the server to the client (as you normally would), then open it in your client (XP virtual machine).
If you want to use the workflow designer (according to your initial condition) then you must ensure that the TNSNAMES.ora file in workflow Home Builder has an entry for your instance on Linux, and then you should be able to connect to the database directly.
HTH,
Matt
-----
WorkflowFAQ.com - the independent resource ONLY for Oracle Workflow DevelopmentReview alpha chapters of my book "developing with Oracle Workflow" are available through my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog?
WorkflowFAQ support forum: http://forum.workflowfaq.com -
I am trying to login to the adobe business catalyst for my website otterrise.co.uk.
I get
This page has been reserved for future use
Recently, I added the domain in site settings on the BC admin panel and changed the names of servers with the Registrar.
This is only temporary? or do I need to upload the Web site again? (im nuer muse from adobe)
Thank you
This isn't a message from BC. It always points to the external server.
Maybe you are looking for
-
Need driver sound WXP for Satellite A300D
Hello! I have laptop Satellite A300D - 14 kI had to install Windows XP Pro.I have problems with the audio drivers and modem. I am receiveing an error message: instalation of driver failed. Could not find the device support for this driver. I try with
-
Why do I get the compile time extremely long with FIFO on the cRIO-9073?
I use a cRIO-9073 to develop a data acquisition system. When I try to use a FIFO to pass data to the host the FPGA, I get extremely long to compile (hours!). Currently, I use that a single analog input of a module 9205 in my loop FPGA. Y at - it an e
-
When the music plays in the night, I always wondered if in WMP visualizations are projected on a wall. I have WMP 11 on XP sp3.
-
I have tried very hard to make my hpdeskjet 940c printer my default printer on my Windows 7 without success. Please, help me!
-
How can I change the parts of an object in motion?
I have a character who is running, and I would change her outfit at some point without redoing the keyframing. I have two outfits made in illustrator and tried alt-do drag the 2nd outfit on a duplicate of the 1st precomp animation but instead of stic