How to access Terminal Server in the Sierra recovery mode?

Similar Questions

• How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

  How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

  See if a program was installed for him. Or use something like Skype / instant messaging program

• How to access a server based on the TCP/IP protocol port?

  Hi all

  Is it possible to access a server through a specific port via TCP/IP?

  We have a step of database server in our network that supports the TCP/IP access. My boss asks if it is possible to get some simple data via blackberry?

  The thing is that blackberry device is not in the network, how can we put a bb device in our intranet? Via enterprise server?

  Alternatively, if we can put the server on the internet, can the blackberry device access via TCP/IP?

  Thank you

  Jerry

  If you use wifi BB can access local servers. using direct tcp: nope.

  You can use a bes express (which is free) If you're afraid of costs, still takes time to install/configure etc of course, otherwise you can only use your product if your BB is in the local WiFi network.

• How to access html files in the folder htdcos of the OHS Server

  Hello
  
  I copied the folder $ORACLE_WT1/SST/htdocs location simple html file (hi.html). I had rebooted the instance of OSH after copying the file.
  
  I can't access this page with the URL http://ohshost:7777 / hi.html. The browser says "the requested page is not found.
  
  But I am able to access the page (index.html) by default without problems. Is that a configuration is required to access the custom in the htdocs directory html pages?
  
  Pls help.
  
  Thank you

  I think you have just the htdocs evil.

  Note that, in your httpd.conf file, the following entry is present:
  -DocumentRoot "${ORACLE_INSTANCE} /config/$ {COMPONENT_TYPE} / ${name} of the component / htdocs".

  in which ORACLE_INSTANCE is something like: / Oracle_WT1/instances instance1 / / (if you have not changed any directory during Setup)
  COMPONENT_TYPE is the OHS and the name of the component is ohs1.

  The directory will be: / Oracle_WT1/forums/instance1/config/OHS/ohs1/htdocs

• Excluding the lines of Terminal Server in the AAA authentication

  Hi all

  Hope you can help, I'm trying to find a solution to exclude only the following line port by using the AAA authentication (ACS GANYMEDE +) on a map of Terminal Server on a Cisco 2600 router.  Does anyone know how to do this, or point me in the right direction to solve?

  I've included the output below:

  AAA authentication login default group Ganymede + local
  AAA authorization exec default group Ganymede + local
  AAA accounting exec default start-stop Ganymede group.
  AAA accounting network default start-stop Ganymede group.
  AAA accounting default connection group power Ganymede
  AAA accounting system default start-stop Ganymede group.
  AAA - the id of the joint session

  line 41
  session-timeout 20
  decoder location - XXXXXX XXXXXX BT
  No banner motd
  No exec-banner
  absolute-timeout 240
  Modem InOut
  No exec
  transport of entry all
  StopBits 1
  Speed 38400

  Is it a question of disabling the command line or using a defined group?

  Thanks a lot for your help.

  Jim.

  Hi Jim

  You may need to create another group for authentication to the and send your AAA configuration

  line to 0

  connection of authentication aux_auth

  AAA authentication login aux_auth line

  You can also configure a username local/pw and map it on the group to here...

  Console and telnet would still use the configured default group, or you can specify specific groups:

  Line con 0

  console login authentication

  line 4 vty0

  vty authentication login

  and specify the aaa authentication settings individually...

  I hope this helps... all the best

  REDA

• How to access my server from a new computer, put in place?

  I bought a new Dell Vostro 470 for my small business to replace the old computer that hosts the server for my small business. I've reassigned the drive for the server on the new computer to the correct component, but when I try to access the files server told me access denied and to communicate with the network administrator. The guy who set up the network is no longer with the company and I have no info on him, so I can't contact him. He asks me a password. I need to know how the transfer server to the new computer and the Admin to the server. I must run Cisco VPN Client Services and attendance for my business. On the old computer, the server's hard drive but also a reader of separately for the server, if that makes sense. So how I assign to the server hard disk to the new computer and have it on a separate drive? (C: and F :)

  Also, I have a modem connected to the old computer so need to connect on the new computer so that it works?

  Thank you

  Nick

  Hi Nick,

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

   

  Hope this information helps.

• How to access multiple VMs on the network with nic 1 host?

  Greetings,

  I have a server vmware running windows XP with 3 virtual machines in suse. I would like to access the 3 virtual machines from the network at the same time. The vm 3 has their own static ip address. I use the bridge network mode. There is only 1 NETWORK card on the XP computer. With this configuration, I can access only 1 vm the network at a time. When I added an another NIC and jumpered it on a second computer, virtual, then I can access 2 at the same time.  Any ideas on how I can access all the vm 3 at the same time on the network with just 1 NETWORK card?

  Even if you only have a physical NETWORK adapter, you should be able to access all the guests at the same time when they use bridged networking and have a correct IP configuration. Can you put your host IP configuration and your guests so we can check it out. Make sure the guests are really "bridged" and disable all firewall during the test.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• How to access another library to the user of the account root on mac 10.11

  Hello experts, can you help me please know how to access the library of the user of an account when I am logged in as user root 10.11?

  Open the users folder, and then his home folder, choose go to folder from the Finder menu and provide exactly the library as the path. If you wish, you can put the name of the follow-up folder a / at the beginning of the path instead of double-click this folder.

  (139251)

• How to access a URL in the BB device 10 Apha

  Hi guys,.

  I want to know how to access the URL of the browser in BB 10, I'm not finding the tab URL, where I can type the URL, any info about BB 10 aplha device will be useful.

  Concerning

  Rakesh Shankar.P

  You have to slide the screen from the top down, from the top of the screen to the bottom of the screen and you will see that the url bar appears again. If you want to enable the preference that the url bar is always visible, there is a toggle switch on the toolbar, you can activate in the opposite State, in which it is currently.

• Server Terminal server disconnects the user frequently

  I have a small problem with one user and terminal server session server goes dark and logout on it.  We have the installer, group policy and do not know why this person knows the problem.  His hard drive crashed recently, but he's back running.

  Is there something I need to do on Windows 7 or Server terminal server itself?

  Server Terminal server are better to ask questions on TechNet

  http://social.technet.Microsoft.com/forums/en-us/categories/

• High on the Server Terminal server using the server Esxi5 host CPU utilization

  P2V fact for a server terminal server 2000 on Esxi5. The problem is its high CPU usage showing when 4 or 5 users are connected and then it freezes.

  Already maximum data to the processor, but it is still an issue.host server had 2 processors with 12 cores and got 1 Server terminal server as a guest.

  Help, please...

  A few days ago, I wrote a blog about this problem and the solution:

  http://vknowledge.NET/2012/02/25/Windows-2000-Server-on-vSphere-5/

  Kind regards

  Mario

• How can access a button inside the video clip

  I have a button named a_btn. This button is located in a clip name a_mc passage. This button is on the first frame. then when you write the code for that:

  function submit(event:MouseEvent):void

  {

  trace ("hii")

  }

  a_mc.a_btn.addEventListener (MouseEvent.Click, Submit);

  his work. but when I keep this button on 2nd chassis or anywhere not in 1 frame inside that movie clip, then I get error runtime as:
  TypeError: Error #1009: cannot access a property or method of a null object reference.
  to NewFlashDocument_fla::MainTimeline / NewFlashDocument_fla::frame1 ().
  How can I access this button on the second picture...

  You cannot reference an object until there are.  Thus, if a_btn is on the 2nd frame of a_mc, you must wait until this 2nd frame plays before trying to refer to a_mc.a_btn.

  If not, put a_btn on the first image and set its visible property to false in the first frame and true as part of the 2nd.  Then you can use your current code and duplicate the design you are trying to achieve by moving the button on the 2nd frame.

• How can I install applications on the sierra?

  I've just updated to sierra and I don't have any apps from adobe installed. I am trying to install a demo. The CC app is stuck on the loading screen and won't show me a list of apps. He tells me he can not create a directory in support of the request, but I created manually and try again. Is it possible to install apps manually? I heard that they are running in the sierra, but perhaps these people had already installed applications?

  

  

  Can Macdabby you please try the steps listed in the error "Unable to install" received during the installation of Adobe Creative Cloud desktop application to see if you are able to install the desktop application Adobe Creative Cloud successfully.

  Please note that as of the time of this announcement Mac OS 10.12 has not yet been made public by Apple.

• How to access page 2 of the user forums?

  Was trying to find a thread for my previous post about the lack of support for Mac OS 10.3.9. It seems that the kuler Update site requires Flash 10, which in turn requires OS 10.4. And I could not access even my previous color palettes, once this change has been made. Yet, there is no obligation to give notice of the present on the site, I could say... Now, I was just trying to find this post, but I can't even access anything beyond page 2 forums...
  
  I'm losing my patience with this...
  
  

  Hi Groove25,

  We are sorry for the inconvenience and the lack of notification! We had to upgrade to Flash Player 10 to support additional features, including the new feature beta community Pulse, which just came out today.

  You can always access your themes with the Kuler desktop, an AIR application. Sign in and you will see your My Kuler themes, which you can download as ASE files. If you have CS3, you can install standard and import directly from Kuler Desktop in Photoshop CS3, InDesign or Illustrator. If you have CS4, you can access Kuler themes by panels of these applications in Flash and FireWorks.

  Adobe AIR - install this before Kuler Desktop
  Kuler Desktop
  Telephone switchboard

  As for the search for messages earlier, I don't know why the paging does not work. If previous messages have fallen out of your sight, check your profile settings. (Profile > personal settings > days for displaying messages).

  Hope that helps...

• No alt key access to menus in the top in mode full screen Ps CS5 Ext?

  I use the trial version of CS5 on a Win7 machine, after using Ps CS3 for a good amount of time.  When you paint in Ps, I almost always mode full screen.  In CS3, you might be full screen mode and press that the alt key and the current letter to a top bar, like F for file or T to filter or W for Window and the menu that appears, and you could hit subsequent letters active to get the associated function.  I used alt + I, then E and H to return the canvas horizontally.  Super fast and awesome!  Now the E was changed to a G, but no matter.  The big problem is in mode full screen, this no longer works!  I just get an error sound when I hit alt and press together. I have to type tab to bring up the menus and palettes until I use the alt + feature letter in the top menu.

  Is this an oversight, or is there functionality to the deactivation of this use of the hotkey mode full screen?

  Any ideas?  If I put this in the forum feature request?

  Thank you!

  DB

  Hmmmm...

  NOT in full screen, the people on this forum sometimes complain that the Alt modifier key is activate menus and the following operations for which they use Alt the original (for example, to zoom out) for itchy trigger windows "ding" sound.

  ESPECIALLY full screen that is not the case with CS5 because the Alt key is not simply activate the menus.

  Interesting idea...

  Maybe Adobe does work that way on purpose so that they could say to people complaining about the first question to run Photoshop in mode full-screen.  It's just a guess.

  As a solution to your problem, you could of course expand the Photoshop window to be very close to the size of the screen and just keep running like a window, rather than using the mode full screen at all.  Yes, I know that this is not a solution, but only a possible workaround until such time (if ever) Adobe bypasses to fix the modifier keys to work properly (again).  I chose to use Photoshop it myself and other than wasting a bit of the screen it seems to be a pretty decent workaround for the use of the space F mode.

  Funny, is that it seems that adobe had the modifier keys about works in Photoshop CS4.  I wonder why they changed.

  -Christmas