Server Terminal server disconnects the user frequently

Similar Questions

• Windows 7 can not disconnect the user

  Hello!

  I thought that Windows 7 is the multi-user operating system, but it looks like I was mistaken. Sometimes, you may not disconnect to connect to another user. This happened to me today again. And it wasn't the first time. Then I wait in my exercise of laptop and notebook battery went to hibernation. I plugged in and turn on again and you can not belive - it pick up Windows and continue to end the session. Apparently there is no option to turn it off with the power button / stop. What to do or use an account that one user, of course, Windows 7 isn't able to use more than one user account?
  What a beautiful end of week for users of Microsoft products. Yesterday my desktop with Windows 7 PC crashed (BSOD), today in the morning my Windows Phone 7 reboot randomly (it's not resolved and answered: http://goo.gl/xF9fx) and now laptop with Windows 7 doesn't know how to disconnect the user. I can't imagine what would happen if I had an Xbox. I am so happy. :-)
  
  
  Kind regards
  Matej

  Hello SLOMatej,

  You can see this FAQ on the failover of the user.
  This may not affect you, but it would be interesting to watch.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/i-cant-switch-users-in-Windows-7/b1d6edca-dcf8-4b54-960d-1a2a04fb4f4e

  Let us know if it helps.

  Marilyn

• Disconnect the user from the sql server Server 2008 SQL server client

  Hello...

  Please can someone guide me on how to disconnect the server SQL server 2008 sql server user client if the client is more than 10 minutes of inactivity
  Thank you
  Salomé

  Hello

  SQL Server is not supported in these forums. Please ask the appropriate here Microsoft TechNet Ant:

  http://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  Thank you.

• Recently, do 800ccc0f with Windows Live Mail IMAP protocol when just read AOL e-mail so I am not idle, but the server disconnected the connection!

  I have Windows 7 Edition Home Premium, 64 bit on an HP G72 laptop. About 2 or 3 weeks, I get error code 800ccc0f when looking at my AOL emails on the downloaded Windows Live Mail program.  I am not idle, as I read my emails in Inbox, but it says that the server has unexpectedly disconnected the connection. So I close the program and restart WLM but the problem happen in say 15 minutes, sometimes earlier.

  This is the IMAP protocol, with port 143 and secure SSL is 0.

  (1) what is the cause for this?

  (2) I have no virus detected by Windows Security Essentials etc.  So is it a recent Windows Update causing the problem, as kb2454826 affected WLM since January 2011? (I uninstall this update kb2454826).

  I also noticed that the problem with the same error code occurs when I delete some e-mails in my Inbox.

  So it is all awkward and Windows Mail on my last laptop Vista was better on the screen, functionality, reliability, and Outlook 2002 on my laptop XP Pro worked and looked better also. I use WLM version 11, I think.

  (3) can Microsoft Windows Mail works on Windows 7, or at least improve WLM to look and work like Windows Mail with better reliability too?

  Thanks in advance.

  SofiaS

  Hi Sofia S

  I use windows live mail version 11 and have an account to imap aol here are the settings I use.

  Right-click on your aol account and click Properties,
  Tab servers make sure that my server requires authentication is checked.

  The tab advanced,
  Mail Port SMTP outgoing # is 587
  Check this server requires a secure connection (SSL)

  Incoming IMAP mail
  Check this server requires a secure connection (SSL)

  change the server 2 or 3 minute wait times, I use 2 and that works for me.

  After clicking on apply and close the window re - open prorperties and check that mail port # 587 outgoing sometimes he stuck back to default settings.

  Hope this helps

• Server of the user to access the VC

  Hello

  I gave access to our VC via VI Client Server to a few users. Now users are trying to access the VC (OS) server via RDP. How can I stop this and at the same time, give them access to the server through the VI Client VC

  Thank you

  That would happen when users are added to the Administrators group on the server of the VC (members have permissions default RDP)

  The correct solution is to

  -remove the administrator groups (thus preventing the rdp) of non-admins

  -create a new group on the VC server and add appropriate users

  -assign roles appropriate to this newly created in VC group

  Méhul

  PS: If you find useful answers, please consider awarding points to perpetuate the spirit of the forums!

• Unable to disconnect the user admin, user has the application running

  Hello
  
  Is there anyway that I can disconnect this user admin, because I know that there is demand running, I'm trying to Log using the regional service, but it keeps giving me the user a reuqest running.
  
  What should I do about this?
  
  Thank you

  Celine wrote:
  Robb,

  Thanks for the reply. The problem is that I can't find the application. then I tell myself that what essbase studio performs the import.

  Thanks again.

  Don

  Stop the services...
  N

  Kill Esssvr.exe process of essbase server.

  Kind regards
  Katia

  Published by: P on April 7, 2011 15:11

• Unable to disconnect the user call

  Hi all

  I want to make an application in which the user is not able to disconnect call.is is possible? can I blocked the red button.

  Thank you

  Ketan

  crush the keydown/keyup. the red button code is 1179648

• AP (1140) is configured as a DHCP server, but the user does not get an IP address

  Hello

  I just a PA 1140 as standalone AP for the purpose of the investigation on site wireless AP is not attached to any network equipment.

  I can't get an IP address after I have configured the AP as a DHCP server.

  SW AP version is: c1140-k9w7 - mx.124 - 25d.JA1

  Below the output of the show conf:

  AP #sho conf

  With the help of 1455 on 32768 bytes

  !

  version 12.4

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  host ap name

  !

  Pulse 9 logging console

  !

  No aaa new-model

  No dhcp use connected vrf ip

  DHCP excluded-address IP 172.16.1.1

  !

  IP dhcp DHCP pool

  network 172.16.1.0 255.255.255.0

  default router 172.16.1.1

  !

  !

  dot11 syslog

  !

  dot11 ssid BTC WiFi SS Kit

  open authentication

  Comments-mode

  !

  !

  !

  !

  !

  Bridge IRB

  !

  !

  interface Dot11Radio0

  no ip address

  no ip route cache

  !

  SSID WiFi SS Kit BTC

  !

  antenna gain 128

  root of station-role

  Bridge-Group 1

  Bridge-group subscriber-loop-control 1

  Bridge-Group 1 block-unknown-source

  No source of bridge-Group 1-learning

  unicast bridge-Group 1-floods

  Bridge-Group 1 covering-disabled people

  !

  interface Dot11Radio1

  no ip address

  no ip route cache

  Shutdown

  gain of antenna 0

  no block of dfs

  channel SFR

  root of station-role

  Bridge-Group 1

  Bridge-group subscriber-loop-control 1

  Bridge-Group 1 block-unknown-source

  No source of bridge-Group 1-learning

  unicast bridge-Group 1-floods

  Bridge-Group 1 covering-disabled people

  !

  interface GigabitEthernet0

  no ip address

  no ip route cache

  automatic duplex

  automatic speed

  No keepalive

  !

  interface BVI1

  IP 172.16.1.1 255.255.255.0

  no ip route cache

  !

  IP http server

  no ip http secure server

  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

  !

  !

  !

  Line con 0

  line vty 0 4

  opening of session

  !

  end

  AP #.

  Hello

  are you have shown a complete result of the 'see the conf?

  I don't see a single relevant command which is to enable a BVI to accept and route routable packets received from its corresponding bridge group:

  1 channel ip bridge

  I hope this will solve your problem:

  conf t

  1 channel ip bridge

  output

  WRI

• ESXi 5.0 is having disconnected the VC frequently

  Hello

  We use Vsphere 5.0. We have seen in one of our vcenter that esxi is disconnected again and again.

  We have done the troubleshooting on this issue below.

  (1) control access to the network of VC. Found ok.

  (2) check the availability of esxi. Search ok.

  Still, problem that happens.

  Please help me if anyone has the solution for this.

  Hello

  Check the KB, hope this will help solve the problem.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2040630

  Also check port 902 permit vCenter server advanced firewall settings.

• User logged on the server over the RDP session - Small Business Server 2011 x 64

  We have a Small Business Server 2011 standard x 64.  We have the configuration of the remote desktop on port forwarding in the firewall to allow a user to connect to this server using RDP remote desktop.  This isn't a server terminal server.  No, there are no available Remote Desktop Manager settings.

  When the user connects through the RDP application and connects to the server.  If the users session is idle for 15 minutes, the user is connected to the server (not disconnected the RDP session, just to connect to the server).  The user must log into the server every time that happens.  We tried adjusting the Remote Desktop Session Host settings and changed the Session time limits, but this isn't the parameter we are looking for.  We have looked extensively through the default domain group policy and see nothing active to this behavior.  We examined local group policies and studied the session time limits in the user and computer configuration > policies > models Admin > RDP >... session host and it is has anything configured here which could trigger this behavior.

  Yet once, it connects the disabled user, not closing the remote session.  We have also examined the user account for this user and looked for resume posting require logon settings (although with SBS, it is not even there to adjust the display settings).  I had partner Microsoft supports focus on this during one hour (he didn't use too much of my time to support) and they have been unable to resolve within an hour.

  Help, please!

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Why the defalut printer set from the server that allows users to change at the level of the Office?

  In 2003 server-side if you set the defalut setting double-sided and print black and white and users at his desk required single color face they could change just to have a job.  The very next time they needed to print it should be indented for the default server double-sided black and white.  Now, in Server 2008 this is not the case, you can assign one of the side server, but the user can change the setting single-sided color and next time they'll print is not defined by default return on the server side.  Any ideas?

  Hi JrJoseph2469

   

  I would recommend checking the Microsoft TechNet community. Please visit the link below to find the community that will provide support for Windows server-

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope this helps.

• How to warn the user that the application is about to disconnect automatically?

  If a user leaves his workstation unattended for a certain period of time, the Apex application disconnects automatically from the server.  The user is not warned about this and if they attempt to save some data on the current page, they don't realize that their data was not recorded until they click on the "Save" button.  At this point, the values of page element empty out and they realize that their data has not been saved.  It is the current page allows many lines to affix and the user can waste a lot of time entering data which will fall into the compartment bits.

  Is it possible to make my Apex application notify the user that the application has been automatically disconnected?

  Better yet, the user can be notified that the app is about to disconnect and the opportunity to extend their session?

  Thank you!

  Kim

  What APEX version do you use?

  The following link, Although unsupported by Oracle, contains a plug-in (I used) for the expiration times of session allowing notifications customized (about to cut etc..).

  http://www.apex-plugin.com/Oracle-Apex-plugins/dynamic-action-plugin/skillbuilders-session-timeout_188.html

  Keep in mind, it's good for APEX 4.0...

• How to register ActiveX exe server for all users

  Hello

  I'm aware that with newer versions of the CVI and Windows when you generate an ActiveX exe server, it records only the server for the user profile.  I read one white papers OR who said that computer administrator may register the server for all users.  I am an administrator for the development of PC we use.  I went to the command and he ran as the administrator of the PC.  I then navigate to the path of the exe.  I published the regserver command.  Unfortunately, I am unable to distinguish if the server exe was registered for all users or if it combined again to my user profile.  Our server exe is called by another program of the CVI.  To validate if the server exe had been registered for all users, I had a user who had not built server exe on the development PC connection and try to start the server within its own CVI program exe.  When this has been attempted, the user receives an error "class not registered".  The user was not able to successfully launch the exe of the server until it has built on the PC itself.  It does not appear that the administrator regserver command worked to save the exe file of the server for all users.  Is anyone aware of any steps that I may have missed?

  I'm working on a Windows 7 with Service Pack 2 for LabWindows/CVI 2013.

  Thanks in advance.

  You will probably have to use Google.

  http://social.msdn.Microsoft.com/forums/en-us/0022ca21-CAA2-4be5-b519-757ff9daf7fb/how-to-register-3...

  or maybe http://social.msdn.microsoft.com/Forums/vstudio/en-US/4fb96971-53a1-4e25-bc75-b49cfaf4d574/problems-...

• Printer Officejet Pro 8620: How to reset the Server Web integrated (built-in web server) on the printer Officejet Pro 8620 Pro?

  The password has been reset, but we cannot go beyond the server request the user name and password to change the other settings.  We have not had any problems to set up the printer to the computer and we are able to print and use the printer.  We just need to find EWS to change other settings.  We use Windows 7.

  Hi there @Mariko23

  Welcome to the forums,

  I understand the SAP you request a user name and password and you're looking to reset the built-in Web server to access accordingly.

  I suggest try to restore default network settings on the device, which should help you.

  On the printer, select Setup, network configuration, network by default, Yes, restart the printer.

  Good luck, I hope this helps

  

• When you use the feature of period of Parental controls for my child's account, the session is saved, and although very convenient for the user, it's boring for the parent. How can I disconnect this acct when it expired already?

  When you use the period of Parental control feature, acct of my child receives the 15 min and 1 put min warning, and then the closure of the session. However, any Web site that it has a really annoying music keeps playing even when I connected under my account admin the only way I can disconnect the acct with Parental control game is to restart my whole machine. Is there another way to disconnect the user standard acct with this feature of limitation in time game? THX.

  Hi marion_librarian

  Thank you for using the Microsoft Answers Forums!

  This is the problem of design, the session remains active in the background, however, so the next time they connect, they can pick up where they left off without losing any of their work.

  In case if you complete the program, there is no these settings in the parental control to close the program, you can disconnect the program using the Task Manager.

  Check the link for more information:

  Explore the features: Parental controls:

  http://www.Microsoft.com/Windows/Windows-Vista/features/parental-controls.aspx

  Set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  NOTE: When you log in as an administrator you can connect to the wide of other users. Follow these steps to log on to the account with Parental control and/or any other user.

  1 click-right on the taskbar and open the Task Manager.

  2. Select users

  3. right click on the user name you want to disconnect, and then click close session.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.