How to add a USB microphone?

Similar Questions

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• How can I add a USB host controller high-speed to my PC?

  My OS is windows xp home edition. I get this message that the HI-SPEED device attached to Non HI-SPEED USB Hub.

  The USB Composite device is a USB HI-SPEED device and will function at reduced speed when plugged into a port not HI-SPEED.

  There is no host controller USB HI-SPEED installed on this computer.

  Recommendation: You add a USB host controller high-speed on this computer in order to get maximum performance.

  So, how can I add this USB host controller high-speed to my PC? Is - this material I must add and physically install to my PC?

  As always, any help is greatly appreciated.

  Thank you!

  drake68

  Hi Drake,

  Review the devices USB connected to your PC and make sure that there is not a USB 1.x device connected to the same USB HUB (front or rear).  USB 1.x devices will cause the USB HUB at the bottom shift to 1.x speeds.

  You have an old PC (2002), it is possible that your PC does not have a USB HUB 2.0.  In this case, you need to install a USB PCI adapter card.

• How can I download photos in Gallery windows on USB microphone please

  HOW CAN I DOWNLOAD PHOTOS IN GALLERY WINDOWS ON USB MICROPHONE PLEASE

  HI Margaret Winwood.

  There is no way to directly copy the photos from Windows Photo Gallery into the micro USB drive.
  You will need to manually copy the pictures from the original location of the pictures on the computer, and then manually copy into the microphone connected to the computer player.

  Try the following steps to copy photos in the micro drive.

  (a) right click on the photo in Windows Photo Gallery and then click Open file location.
  (b) now right-click of the photo, click on copy, then open the Windows USB drive and paste it.

  Windows Photo Gallery: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

• How to set up a USB Microphone and a headphone audio jack at the same time on Windows 7?

  I recently bought a CAD u37 USB microphone for use in various records and a commentator game on Youtube when I came across a problem. When I plugged the microphone all other sounds immediately extinguished and I couldn't hear the game. I tried to unplug and re - plug in the headphones and the microphone, even play with no helmet without result.

  I did some research and found out it's because the microphone is automatically configured for audio input and output and the card sound/headset, not having a configuration. I've recently considered buying a $5 female jack audio converter USB to work around this problem.
  Will this work, or just be a waste of money? Are there simpler solutions like a flick of a switch of audio control panel configuration? Are there any programs that will allow me to configure the audio and input output? Is it still possible? Thank you!

  Hi Ben,

  I suggest you try to connect USB female to the converter audio jack, this should help to solve the problem with simultaneous USB microphone and audio input jack using headphones.

  If you have any more questions, respond to this post with the State of the question. I'll be happy to help you.

• How to add contacts to my Apple Watch?

  Can someone explain how to add contacts to my Apple Watch 2, watch OS 3

  Hello

  Apple Watch is not a Contacts application and it is not possible to create new contacts on your watch.

  When make calls or send new messages, existing between in contact with instead are selectable via the phone and applications or Messages using Siri / the microphone to dictate a phone number:

  Instructions are available here:

  • Messages: https://help.apple.com/watch/#/apd92a90f882
  • Calls: https://help.apple.com/watch/#/apdc38d7a95e

• How to add a monitor HP Envy 23 IPS to a desire to tilt all in one

  We have a 27-k150xt want tilt all-in-one with the Windows 8.1 operating system.

  How do add us a HP Envy 23 inch monitor IPS P # E1K96-60001?

  Thanks in advance for your time and help!

  Hello

  The HDMI port on the tilt is IN a port. You need something similar to the following device (called USB video adapter):

  http://www.harveynorman.com.au/Targus-USB-3-0-superspeedtm-dual-video-adapter.html

  Kind regards.

• How to use a USB stick for extra storage

  I try to add the storage to my macbook air 11 inches so I have a USB to sd card and I was wondering how to add this on my main hard drive storage.

  Thank you!

  TheTrueTechie,

  Did you plug in the USB cable to your laptop?

  (psssst: you may want to consider another forum ID/handle)

• The Yeti USB Microphone Blue is compatible with iPad Air?

  Hi all

  I recently bought a Yeti USB Microphone blue after reading was consistent with an iPad (iOS 9.2) of Air using a powered USB hub and cables needed.

  I have the mic plugged into the USB hub powered through cable, the iPad plugged into the hub via iPad charging cable and the hub plugged into a socket via the supplied adapter. The iPad, however, does not seem to recognize the microphone at all. Is there something that I am missing or something that maybe, I do not consider?

  Any help on this would be much appreciated.

  Happy 2016!

  According to the website of Blue, all their microphones are compatible. They say however that not all powered USB hubs will work. They do not say why or how whether your choice will be. They mention a Belkin 4 port.

  The other thing I noticed... they use on an iPad analog 30PIN connector 2. Maybe the lightning digital connector is not compatible.

  http://bluemic.com/blog/2011/03/snowballonipad/

• Computer recognizes the usb microphone and the head set with the sound prompt but not instructions to continue.

  Original title: usb speaker and seeded

  c.p. recognize the usb microphone and head studded promp sound but no instructions to continue. I am trying to add voices or narration to my editing of soundtrack.

  Hi Billylambert,

  1 Windows operating system you are using?

  2. What is the brand and model of headphones and microphone?

  3. what video editing software do you use?

  4. were you able to use the device before without any problem?

  5. have you made a recent software or hardware changes to the system?

  If you are using Windows 7, you can try to run the Audio recording utility and check if it helps.
  Open the troubleshooting of Audio recording

  For more information, see the article:

  Connect one microphone, music player or other audio device to your computer

• How to add HP Photosmart 5520 to the HP Solution Center

  Can someone tell me please how to add my new HP Photosmart 5520 in the HP Solution Center.

  My other printers HP added autumatically when I installed them, but this one did not.  I have spent quite a long time and can't find anything on how to do it.

  Thank you

  pinkcloud

  PinkCloud,

  Welcome to the HP Forum.

  You must install the full features software for your printer: Printer Wizard (the new name for the Solution Center) is installed as part of the installation of the printer software.

  General instructions to install the printer software

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open e-all-in-one printer, HP Photosmart 5520 drivers
  • Enter your operating system from the menu drop-down
  • Click NEXT and scroll down
  • Find the category driver - software product installation
  • Select the base driver, e-print, or a full features software
  • Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  •         Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  •         Scroll through the list of videos back until you find the video that best fits your situation.
  • Connection USB: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including Manual, pages How-to's , Troubleshooting and SOLUTIONS section and alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs-Up Kudos to testify and say thank you.

  Although I strive to reflect best practices of HP, I do not work for HP.

  When the answer is a good patch or solution to your Question, click accept as Solution !

• USB Microphone setting

  Suppose I have a USB microphone, with technical specifications, 16-bit, 48 kHz. Now, when I change the setting in the Audio hardware preferences, selecting anything other than 48K of the questions? Futher when you save an audio file, can I save it to higher bit depth. If Yes, how is it possible, as the microphone is only sending 16-bit per sample at a rate of 48K, and we are recording at the depth of bit higher and higher sampling rates.

  subhashishd58601764 wrote:

  Suppose I have a USB microphone, with technical specifications, 16-bit, 48 kHz. Now, when I change the setting in the Audio hardware preferences, selecting anything other than 48K of the questions?

  Once you have selected the device, then in theory you could save in any case; but only if you let the operating system, which it would almost certainly be automatically re - sample. So, a record at 48 k is definitely the way to go. If you need the result to a different sample rate, let hearing then - much higher quality conversion.

  Futher when you save an audio file, can I save it to higher bit depth. If Yes, how is it possible, as the microphone is only sending 16-bit per sample at a rate of 48K, and we are recording at the depth of bit higher and higher sampling rates.

  You can save to a greater depth of bit - but all that will happen is if, for example, you have saved in a 24 bit file, the 8 least significant bits are backed up by zeros.

  Bottom line - your microphone provides a binary stream of 16-bit 48 k. Nothing you can do will improve the quality of this; You'll end up just using more storage for the same signal, and if we re - sample on the way, a lower result.

• First CC 2014 and Samson C01U USB microphone

  Hi, I have a problem with a samson C01U USB microphone because it does not recognize first cc 2014 in the hardware section (mac version). It's curious because hearing recognizes perfectly, it works well. Any solution? Thank you

  Pausoka wrote:

  Hi, I have a problem with a samson C01U USB microphone because it does not recognize first cc 2014 in the hardware section (mac version). It's curious because hearing recognizes perfectly, it works well. Any solution?

  Using microphones USB pr on OS X can be difficult.  Run the utility of setting up Audio and Midi (part of Mac OS X) and create a new aggregate device.  Says, add the micro USB as "entry", so that any device output you use (Line Out, integrated, etc.) as output.

  After return to proportional representation in the config of Audio material , choose this new global device as the audio device.  As you put the MIC and your output devices, you will be able to use it as an input and output device.

  Finally, you want to create a new audio track which is mono only.  This track allows to record from the microphone.

  That should do the trick for you.

• Two USB microphones on a computer = a track, two voices... right?

  Hey everybody,

  I apologize for my ignorance, but I have a long list of things to learn about technology, and I learned a lot about computer specifications and features, so I went a little bit. I just finished a list of parts for a custom version, and once this is done, I need to establish a method for the monitoring of sound. I saw on a few threads here that you cannot build two microphones mapped onto a separate track each unless you use a pre microphone or mixer with multiple microphone inputs... and it's unfortunate, because, after spending more than $1 k for the computer, I'm not really willing to spend hundreds more on an intermediate device , microphones, stands, pop filters AND cables. Other than the microphone preamp, it's at least two of everything, and it will get expensive fast.

  So... If I use two USB microphones on a computer with Adobe hearing, then the voice of every microphone will be record for a single track, correct? If I wanted to change the voice, I have to go until then individual time during the track instead of referring to, say, "A track to voice A" or "Track B voice B," right?

  House777 wrote:

  So... If I use two USB microphones on a computer with Adobe hearing, then the voice of every microphone will be record for a single track, correct? If I wanted to change the voice, I have to go until then individual time during the track instead of referring to, say, "A track to voice A" or "Track B voice B," right?

  Not much, so no chance to work at all, I'm afraid. Most people have a little trouble to make a USB microphone is working correctly, and I'm not aware of that anyone ever get both working at the same time. I'm not saying that this is absolutely impossible, but there is a good chance they are.

  The problem is that the hearing is focused on the ASIO, and Steinberg (who invented) have determined that because he hits his way in the OS to give you better performance of latency, you can only use one device at a time. And your USB microphone is a device. There is just an outside possibility using ASIO4ALL you can aggregate two USB devices I have the feeling that there is something else that could stop this work - these devices are very slippery, and pilots with them generally aren't much anyway. So you can try it if you want - but I think you would be wasting money. And above all that, you'd have no supervision available (limited to a new device), or if you purchased a USB microphone with a headphone jack on it, you would very quickly find embarrassing how what is...

  Which brings me to:

  After spending more than 1 k $ for the construction of the computer, I'm not really willing to spend hundreds more on microphones, an intermediate device, pop filters, stands, AND cables. Other than the microphone preamp, it's at least two of everything, and it will get expensive fast.

  To start, you can buy pop and stands filters independently, so it isn't in the equation. Cables really are not expensive (especially if you learn to do it yourself), and there are a number of mixers small enough at a great price with links of USB, and which also provide the replay and monitoring. For example, if you have purchased a Behringer Eurorack UB802, you could pan each microphone on the side of the stereo, and it would let you separate them. It's simple for this divided into a pair of mono channels, so that you can edit them separately if you wish.

  And your overall cost is going to be very similar. USB microphones is more expensive than their equivalents not USB, and something like the Behringer will make the difference. So for a similar expense, you will get a system that works, more viable output and some monitoring available. I would say it was a mistake, myself.

• USB microphone is not listed in the Audio of first drop down hardware

  Hi all.

  First of all, I would be grateful very gladly any idea here because I'm totally stuck with this tent to record a voice on the track.

  The title is pretty self-explanatory. I work on Mac OS X and first Pro CS5 and I would like to record an audio track, but the USB microphone is not displayed. I have already read several forum discussions and followed the steps, but this problem has not yet been mentioned.

  That's what I did several times without success:

  1 - Connect the USB cable and check that MacOS recognizes. It works very well.

  2 - in Premiere Pro mark taken as a track record. Error message because no input device has been declared.

  3 - premiere Pro > > Preferences > > Audio-Hardware-> no microphones on the menu drop down.

  4 - Open audio and Midi and I add all microphones to Premiere Pro (Line-In, built-in and USB device).

  5-return to step 3: reopen the project > > Preferences > > Audio-Hardware-> Line-In and integrated appears, but not yet of micro USB.

  I was able to record with the built-in microphone, but I don't know what is happening to the USB one. In fact, if I go back to step 4 and open the audio and Midi, boxes that I had checked once reappear unchecked.

  I don't understand what is happening. Thank you in advanced for your help.

  I'm a PC guy, but if I had your problem I would try to turn off the microphone integrated and entry at the level of the BONE, so that the only possible option for the operating system and applications of line would be the USB microphone.

  I use a Logitech USB headset and Pr CS6 has no difficulty to recognize or record with her.

  Jeff