How to allocate memory for string

Similar Questions

• Tecra A8 - 103 - how to increase memory for video card?

  Hello

  does anyone know how to increase the memory for the video card on my Tecra A8-103?

  I've heard that I can 'take' of RAM memory and 'Add' to video memory card, but don't know how? I just live in the BIOS, but have not seen this feature?

  I need, because, when I work in Visual Studio .NET and pass code for fashion design, an image disspears and I have to wait 15 to 30 seconds until :(((back what the image

  Therefore, I do not think that increasing memory video card will solve this problem?

  Thank you x 10 in advance

  You cannot pass the VRAM chips, they are soldered to the circuit board.

  On some machines, you can dynamically increase the VRAM by installing more RAM System. Enjoy reading your user manual.

• How to increase memory for my Jdeveloper 12.1.2.0.0 weblogic Server?

  Hey everybody,

  As my title suggests, so I try to increase the memory for my weblogic server in my 64-bit windows machine 7, with 8 GB of ram.

  Values seem to be: arguments of memory in JAVA: - Xms256m-Xmx512m - XX: PermSize = 128 m - XX: MaxPermSize = 512 m

  I did some research on this forum and I added to my jdev.conf:

  AddVMOption - XX: MaxPermSize = 1536M (in this one I only changed the value)

  AddVMOption-Xmx1536M

  AddVMOption-Xms1536M

  And I've changed that: MEM_ARGS = "- Xms1024m - Xmx1024m" in my startNodeManager.sh file

  I always get the same line in my server but I need to change the values as I do not get the server to run my application very well (it is stuck in the loading of my databases and graphics) and I think he will continue until I get an exception of heap error.

  Any ideas on how to change this?

  Kind regards

  Frederico.

  Hi Frederico,

  That's what I did. At the start of my WLS, I saw this line;

  C:\Users\alanz\AppData\Roaming\JDeveloper\system12.1.2.0.40.66.68\DefaultDomain\bin\startWebLogic.cmd

  I went to this file and added set MEM_ARGS =-Xms512m Xmx1024m - XX: PermSize = 512 m - XX: MaxPermSize = 1024 m

  Restart the server. However, because this file is created by the configuration file, the values may be lost during the installation of extensions (as States hand file in a comment)

  I hope this helps.

• How to get memory for a virtual machine?

  Hi all

  In vSphere Client > select a virtual machine > summary under general tab, shows:

  Guest OS: Windows XP

  VM version: 7

  CPU: 1 vCPU

  Memory: 1024 MB

  General memory 103,58 MB

  With PowerCLI, how to recover this figure "103.58' for VM 'vm123 '?

  Concerning

  marc0

  You can get the overhead of the memory of all your virtual machines with:

  Get - VM | Select Name,@{N="MemoryOverhead; E={$_. ExtensionData.Runtime.MemoryOverhead/1MB}}

  Best regards, Robert

• How to allocate memory

  Hi all
  
  The allocation of the memory (RAM) for the new installation of oracle.
  
  RAM memory: GB n
  Processors: m
  
  PGA =? %
  BMG =? %
  
  Temp = TS? Is this related to the RAM/virtual memory
  
  Oracle 10.2.0.4
  operating system: AIX 5.3
  
  Thanks in advance

  There is no hard and fast rule for the allocation of memory to any instance. Up to a few methods used for the assignment.

  SGA_TARGET = (TOTAL_MEM * 80%) * 20% to 40% for an OLTP system

  PGA_AGGREGATE_TARGET = (TOTAL_MEM * 80%) * 20% for an OLTP system
  PGA_AGGREGATE_TARGET = (TOTAL_MEM * 80%) * 50% for a DSS system

  Where TOTAL_MEMORY is the total memory available to the system. If multi-instance applications running on the machine, the values must be adjusted accordingly.

  Once the databases work with all its strength, adjust the values of parameter from different views.

• Satellite T130 - how to allocate memory on the video card?

  Hi all

  You just bought a T130 has 4 GB of ram.
  I would attribute this to the video card.

  How can I do this, I do not see it in the BIOS, normally there is a setting to change AGP aperture but I can't.

  Does anyone know how to do this?

  Hello

  This setting is controlled by the driver of the software or the hardware itself and it cannot be changed. However, you really don't need to worry; If more RAM is required (almost always because of the game) it it will get to the need.

• Create endpoint network Stream - pre-allocation for strings

  Hello

  I would use really allocation entry mode to pre-allocate memory on my RT goal. My concern is how to allocate memory for the size of the string.

  Because of the documentation

  "pre-allocate specifies that memory allocation buffer occurs when the end point is created. Wired for the type of input data determines the amount of memory allocated for each item. If a greater element is added to the buffer during execution, the extra memory is allocated dynamically. "

  I understand that if I am wiring constant string to the category data, 40 to the size of the buffer I receive buffer to 40 channels. String but how long? A single character?

  I don't want to let the Manager of memory to run after the creation of endpoint, so I would allow large memory space (for example 40 string, 10 characters each).

  Is it possible to do constant connection string (for example with 10 characters) or I have to put my string specific to the cluster size?

  Another question of trival perhaps, is - it possible to check what size buffer was allocated by this VI?

  Kamil

  Hello

  Here is some additional information on the allocation of memory for network streams:

  http://www.NI.com/white-paper/12267/en/

  My guess is that in order to pre-allocate buffers to not scalar data types, you'll write 'false' elements of the size desired in the stream to read or to flush out these elements "dummy" bevore using the flow in normally.

  Best regards!

• Allocate memory

  Hi all, I'm new to programming and I'm studying LabVIEW myself. I wrote a Mathscript code on the block diagram, it works correctly and I recorded it. But after I have opened the same code and it does not work and it says "LabVIEW: memory is full...» "I checked the solution but I don't know how to allocate memory in LabVIEW. It's weird because I saved only a few files.
  I'd really appreciate your help. Nice day!

  What are typical input values rlo all controls?

  (For example if your "sampling rate" is equal to zero, you won't miss memory, of course.)

• allocate memory and call the dll function that writes to the pointer

  Hello!

  I have a DLL that has a function as in the following example, I need to call from labview. In C, I need to allocate memory for data and of course the struct. I add the pointer and the length of the data to the struct and call the function with the struct. The function itself inserts values of the struct and affected memory. Someone at - it a working solution how this can be done with Labview?

  typedef struct Thestruct
  {
  UINT16 val1;
  UINT8 val2;
  UINT8 val3;
  DataLength UINT16;
  UINT8 * data;
  } T_Thestruct;

  MY_API status MY_API_CALL udaReceive (handle, T_Thestruct * args);

  I tried in labview (see photo), but I only got values inside the structure as well as the 1097 error, reserved memory included values as before.

  OK, I found the soluton to my own problem. Alignment on the struct must be corrected in Labview. There must be a value between dataLength 2Bytes dummy and the pointer.

• error 1097 after the call dll function that allocates memory inside

  Hello!

  When a one call my duties in my dll of LabView, I get an error 1097. My function takes a few arguments, and then allocates memory for the measure.

  He doesn't have pointers to this memory area, it's just allocates this memory for himself. I don't know what could be the problem, no doubt, I'm missing something.

  Could you please help?

  Best regards

  Tamas

  
  

• recommendation of the memory for the guest operating system

  Hi guys,.

  I need some advice

  I have a pile of vsphere 5 made of 2 servers on each server that I have on 5 VM

  (1) domain contoller 2008 standard edition + dhcp + dns

  2) exchange 2010

  (3) file server

  (4) primavera

  My question is what is the recommended memory and cpu for these VM configuration? I'm a bit confused

  What happens if I don't set up the limits and booking hotel and leave all default? What is the point of the week in this configuration? If I leave all default each VM does not use memory a cpu as it needs?

  Thank you specify in advance

  To add the tips of memory... Many people allocates memory for the virtual machines that will never be used, and ultimately you consume the memory of your host much faster than necessary. Start low when allocating memory to a virtual computer. Adding memory is simple to make, after you have collected on the functioning of your host performance data. The Performance tab will show you what is happening.

  Mike

• Satellite P300-1EI (PSPCCE) - how to allocate more memory to the graphics card?

  Hello

  I have a laptop toshiba satellite P300 with this graphics card: ATI mobility radeon HD 3650.
  I want to allocate more memory for this graphics card. How could I do?

  I can't do this in my bios, I don't have this option...

  Another way?

  Hello

  Something like that is not possible because the graphics card driver it controls automatically.
  If the graphics card would need more graphics memory then the driver assigns the amount of necessary RAM automatically.

• put db failed for "cannot allocate memory".

  Hi exports BDB.

  
  

  I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:

  (1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)

  (2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?

  (3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?

  (4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?

  (5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?

  BRS,

  Min

  Hi Min,

  The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.

  (1) the memory will be allocated heap if you have not defined a function alloc.

  (2) all databases in an environment share the same cache (16 m here).

  (3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.

  (4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:

  https://forums.Oracle.com/thread/2560134

  The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.

  To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.

  Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.

  This thread can help you on this:

  https://forums.Oracle.com/thread/2557981

  5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.

  Kind regards

  Winter, Oracle Berkeley DB

• "Impossible to allocate 0.000 MB of memory, or decrease memory for rendering of thi requirements

  Why I get this message, it is a new computer (MacBook Pro)
  

  Intel Core i7 2.7 GHz

  8 GB 1600 MHz DDR3

  Intel HD Graphics 4000 1024 MB

  584,48 GB of free space.
  

  "Impossible to allocate 0.000 MB memory, decrease memory for rendering of this framework requirements, or install more RAM... »

  
  

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• How can I order additional memory for my HP Mini 210-2001sd PC computer

  How can I order additional memory for my HP Mini 210-2001sd PC computer

  Here is a link to a seller.