How to apply the high pass filter on Smart Object

Similar Questions

• How to avoid the transparent background, white in smart object (psb) conversion when the image track high fidelity that we have the ability to ignore track of white up to 16 colors.

  I have an image psd file in photoshop cc 2014 the layer background transparent. I wanted to convert to vector. The best option I've seen was converted first to a smart object in photoshop by layer-> Smart objects-> convert to smart object. then he exported a CPS. Then I opened the file in illustrator and applied image tracking tool, but the background transparent got converted to white but I had the option to skip white up to 16 trace of color. But in the case of Conversion of high fidelity, the option do not know white is not available, what do I do now?

  After using the Trace of the Image and expand the result, just find a part that is filled with white and use Select > same > fill and just delete.

• 3 color separation - viewable problem with high-pass filter help

  Hello and thanks in advance for your time and help!

  I fix a color image created with color separation negatives, 3 images black and whites (captured on photographs) combined in the RGB layers to create a color image. The original negatives have been very badly damaged, so the alignment and the correction was quite complicated.

  I'm finally get closer, but there is still a lot of blotches that I have a problem fixed, where each of the channels have been under/over exposed, creating stained yellow or green, etc.

  I tried to use the high-pass filter and discovered, he shows me exactly my problems - of the high-pass filter usually makes all grayscale, however I see blue exactly where I need to make a correction - see screenshot.

  How can I selectively change this field! Other ideas for filters or way of singling out this broken capillaries to make adjustments? Editing is really not help color balance, I tried also to hue/saturation, but I am not able to isolate problem areas.

  

  < < second Image deleted by Mod, in accordance with the guidelines of forums > > >

  If a channel in the filtered image is useful and then load it and use it as a layer mask (and change with the curves and the additional filters needed).

• How to apply the filter to a specific column condition, but not to the report?

  Hello
  
  I'm having a problem in the application of a filter to one of the column condition.
  I have a scheme with the table around 10 dimension tables and a fact. My requirement is to provide a count on the table of facts with associated with some other columns in the dimension tables.
  
  Lets consider a scenario with tables as sales (Fact), region (Dimension), Year (Dimension), Type of sale (Dimension).
  
  Now my requirement is to highlight the fields
  
  City (Region) - city
  Year-
  Sales Count (dirty table) - number of all sales of the fact table
  Sales Count (dirty table) - count of all sales of the fact which type of sale table is 'Cash'
  
  Here, my question is how to apply the filter condition of Sales Type = 'MONEY in' only on one of the Sales Count column that comes from the fact table. I want to be ordered for the fourth column, the filter condition.
  
  Can someone let me know how?
  
  Thank you

  You must do this:

  1) click the button column fx sales. (This procedure does than on fact, not attributes.0

  2) click on the filter button.

  (3) select the size of sales from the left Type "selection list."

  (4) in the filter window, enter CASH, and click OK.

  This will create one filter on sales 'use' size 'type sales' as the filter. It willl filter only to this column.

• How to apply the AUTOFILTER on interactive report.

  Hello
  
  I'll have a report / form based on assume that the table EMP
  
  Page1 - Interactive (report)
  Page 2 - form
  
  report query-> select * from EMP;
  
  1 has created a new employee P2_EMP ('ABC') on page 2 and SAVE the record.
  2. as soon as I save the record on page 2, the control returns to Page1 (Interactive report)
  3. on page 1, all the Archives of the employees are displayed.
  
  What I want to, whenever I create a new employee P2_EMP = 'ABC' and SAVE the record, control on Page1 (Report) but only recording with employee P2_EMP = 'ABC', should be displayed on page 1...
  
  HOW can I achieve., I mean how to apply the AUTOFILTER on Page1 (interactive report)
  
  Currently, I have to manually apply the FILTER on page 1 (employee = ABC), I want to avoid.
  
  Thank you
  Deepak

  Hi Deepak,

  Could you have another element to the 1 'P1_NEW_EMP' page, pass this back into your branch when control passes from Page 2 to Page 1 and then put it as a condition of your report.

   select * from EMP
  where (employee = :P1_NEW_EMP or  :P1_NEW_EMP = '');
  

• High-pass filter question

  Hi all

  I have a question about the high pass filtering in LabVIEW simply based on observation, have never been taught directly on the filters.

  A signal of high pass filtering, with a Butterworth IIR filter (2nd order) for example, around the time Fortran, = 0 there is a transition from a high-intensity "false" at a rate expected, as the officer although this is achieved thanks to a program as I have nothing else to hand at the moment.  In order to minimize the importance, for the rest of the filtered signal, you can increase the sampling time, change the filter settings or even add time of additional levy in order to truncate it.

  Is there an established method to get around this?  The reason why I ask is because I'm trying to distinguish accurately Laminar and turbulent parts of a signal of speed but on time = 0, in a completely laminar signal, our method returns false positives for the presence of turbulent structures.  I assume that this will always be the case, but it is better to ask first and concluded later!

  Thank you.

  All filters have a transient initial.  You must wait until it has settled on or try to compensate for the spike in some way.  Transitional measure also depends on the input (including any noise) signal, it is generally not possible to compensate exactly.

  Lynn

• using PostDelayedCall how to get the value passed through void * callbackData?

  Can someone tell me how to get the data passed through void * callbackData?

  The following code, panel_ptr has the right address but still contains zero.

  void CVICALLBACK value_changed (void * callbackData)
  {
  int * panel_ptr;
   
  panel_ptr = callbackData;
  calculate_new_value (* panel_ptr);
  }

  int sign;

  Panel = 2;

  PostDelayedCall (value_changed & Panel, 0.2);

  The problem is using the callbackData parameter if it is a pointer, it must be a pointer to something which is still topical at the moment that the callback executes. That is to say, you cannot pass the pointer to a local variable in callbackData as when the callback executes the pointer is no longer valid. You can switch from its value, instead, in this way:

  ... SomeFunction)

  {

  int sign;

  ...

  Panel = 2;

  PostDelayedCall (value_changed, (void *) Panel, 0.2);

  ...

  }

  void CVICALLBACK value_changed (void * callbackData)
  {
  int panel_ptr;
   
  panel_ptr = (int) callbackData;

  calculate_new_value (panel_ptr);

  return;
  }

  There are many discussions on the forums on callbackData parameter that you might want to read.

• How to apply the "Slate Pro Light" using CSS font?

  Hello

  Could you tell me how to apply the font of "Slate Pro Light" using CSS? I have not found a solution for the 'Light' slate Pro variation selection.

  Thank you.

  I usually use the definition of CSS of police-family at the following address on my html and body elements:

  font-family: "Slate Pro", Slate, "Myriad Pro", "BBAlpha Sans", Helvetica;
  

  Potentially adding "slate Pro Light" should do the trick. Alternatively, you could take advantage of the make-weight property when you need a lighter framework:

  font-weight: normal|bold|bolder|lighter|number|initial|inherit;
  

  In this case, lighter, might do the trick?
  

• How to apply the strategy of UCS1.4 collection (1 d)

  Hi all

  I try to collect statistics on the performance of the network. but do not know how to apply the policy to the collection.

  Service profile, I cam see political Stats. But within the political framework of Stats, there are onlu available in config/choice is political threshold.

  Can someone help out me? Thank you very much!

  I think this is what you are looking for?
  
  UCS stores the past 5 statistics records at the "Reporting Interval" setting;
  
  There is no configuration to change that number.  You can put this interval out 8 hours but then you only get a snapshot every 8 hours. Trending or history retrieval would require an interval based extraction and storing application that utilizes the UCS XML API.
  This is a link to the UCS XML API information.
  
  http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/api/ucs_api_book.html
  
  

• How to apply the theme of Oracle Alta UI in ADF

  Hi all

  I use Jdeveloper 11.1.1.1.7.2 release1.

  Can anyone provide your inputs on how to apply the theme of Oracle Alta UI in the ADF.

  For any consultation on Alta IU @ http://www.oracle.com/webfolder/ux/middleware/alta/start-develop.html

  Thank you and best regards,

  Miko Auntie.

  http://www.Oracle.com/WebFolder/UX/middleware/Alta/start-develop.html

  http://www.Oracle.com/WebFolder/UX/middleware/Alta/patterns/PageDesign.html

  http://www.Oracle.com/WebFolder/UX/middleware/Alta/new-dev-w-Alta-skin.html

  Oracle ADF: Customized design

• How to apply the mass PhysX to a w3d created with max

  Hell,

  I need to figure out how I can do to apply e.g. "mass" or "restitution" to some body created with 3d max and imported in Director w3d format.

  I know how to apply 'transform.position', 'transform.rotation' to a w3d created with max.
  and how to apply the mass and the return of an object that is created with lingo, but I do not know how to do mass a w3d created with max.
  Who is the syntax?

  Can you give me a hint?
  Thank you.

  It works for me :-)

  I sent you a private message.

• How to apply the gradient to the entire page

  Hello

  Can someone tell me please how to apply the gradient to the entire page as a gradient background color.

  I tried for centuries and can not see the routes to apply background color

  any ideas? step by step please I really get lost because I'm new to Indesign and do not know the names of all the tools.

  Thank you

  If you want to this gradient to print (or export) with the page, and then you have to draw a rectangle and fill with the gradient.

  If you want on a number of pages, put the rectangle on a master page. You might want to add a layer and move it to the back, put the rectangle on that layer, then lock the layer.

  Dave

• How to add the drop-down filter list in a dashboard button/menu

  Hi all
  
  I created a custom dashboard related activities, but I don't know how to put the drop down filter the list (for example, exercise & fiscal month) on top of the dashboard as Pipeline analysis (report SOD predefined) as well as the button 'Go '.
  Clues?
  
  Thanks in advance

  Hello!

  In the page analysis of the design, you must create a new dashboard guest.
  Go to Design Analisys, select a report type (doesn't matter which) e.g. addresses of account (1).
  Then on the top left of the page, you will see 3 icons, and the third is new dashboard fast....

  Once you have created your command prompt, you can save it as the other reports, and you can add it to your dashboard.

  I hope this will help, do not hesitate to ask for more!

  Max

• How to set the low-pass analog input (smoothing) on my DAQ configuration filter?

  I read the following of the PXI-6251 manaual:

  "On some devices, the cut-off is fixed. On other devices, this filter is programmable and can be switched to a lower frequency. For example, the hardware OR of the 628 x have a programmable filter with a cutoff frequency of 40 kHz that can be activated. »

  It does not explain how you know this value. So, I have the following questions:

  1. How will I know what the cutoff freq is on my device?

  2. How do I know if its programmable?

  3. how this program if it is programmable?

  I use the PXI-6251 in conjunction with the PXI-1031.

  Thank you very much.

  The PXI-6251 has no anti-aliasing/programmable filter. Bandwidth (-3 dB) small signal from the 6251 is 1.7 MHz.You will find these information in the specifications manual.

  If you need a filter, you must add the signal conditioning yourself.

  The 628 x M high precision tips are the only cards of the series M 'programmable' low pass filter. Check this KB for more details.

  I hope this helps.

  Luca

• How to apply the classic filter Design Express VI

  I use the digital classic filter Design VI design a bandpass filter (try to follow this example http://www.ni.com/white-paper/4460/en/), but then I can't locate

  Filter Express VI to use the filter

  

  The express VI filter comes with the LabVIEW base development system. It is found in the range of functions under Express > Signal Analysis > filter. Have you checked here?