3 color separation - viewable problem with high-pass filter help
Hello and thanks in advance for your time and help!
I fix a color image created with color separation negatives, 3 images black and whites (captured on photographs) combined in the RGB layers to create a color image. The original negatives have been very badly damaged, so the alignment and the correction was quite complicated.
I'm finally get closer, but there is still a lot of blotches that I have a problem fixed, where each of the channels have been under/over exposed, creating stained yellow or green, etc.
I tried to use the high-pass filter and discovered, he shows me exactly my problems - of the high-pass filter usually makes all grayscale, however I see blue exactly where I need to make a correction - see screenshot.
How can I selectively change this field! Other ideas for filters or way of singling out this broken capillaries to make adjustments? Editing is really not help color balance, I tried also to hue/saturation, but I am not able to isolate problem areas.
< < second Image deleted by Mod, in accordance with the guidelines of forums > > >
If a channel in the filtered image is useful and then load it and use it as a layer mask (and change with the curves and the additional filters needed).
Tags: Photoshop
Similar Questions
-
PHOTOSHOP CC - problem with the LIQUIFY filter
After the last update of Photoshop CC, liquefy filter stop works well
Is one of my favorite filters, how can I solve this problem?
It is possible to regress to an earlier version of photoshop CC?
Hi alexstaffa,
The problem with the Liquify Filter has been fixed in the last update.
You can download CC2015.1.1 from this link and install it: keeping up to date of Photoshop
-
I have a problem with the Liquify Filter
I have a problem with the Liquify Filter.
After you make the corrections in PS 2015.1 release seems to me the area I made the corrections made as if she was overexposed
I apologize for my English
Known issue. Adobe work on a fix. No ETA when the fix will happen.
In the meantime, you have several options, in successive order, based on the convenience of quality of life:
- Hold down the ALT (Opt on Mac), click and hold the filter in the menu bar > drag on toward the bottom to liquefy > release. This temporarily disables the GPU acceleration. Note that it will take more time for your images to deal with but they will treat as before.
- Use the 8-bit instead of 16-bit images images.
- Click Edit > Preferences > Performance and disable your GPU in the upper right, under "Settings of the graphics processor." Note that this will disable the GPU acceleration in all areas in Photoshop; you need to return to reactivate it to other filters.
- Use a previous version of Photoshop.
-
How to apply the high pass filter on Smart Object
Hi all
I'm trying to apply a high-pass filter on a dynamic object. Is this possible? -When I select the high-pass filter, choose my RADIUS and click OK, it applied the results to the entire layer. I expect the image below...
... but I don't get it.
I hope that makes sense, because I'm having a hard time to explain. Basically, I do not see my image (as in the first photo above), I see the high image passed instead.
Jeff
Be aware that happens if you hide the effect of the dynamic object, you will have just the layer mode to overlay, which isn't want you want if you will exacerbate. You want the mask on the layer itself.
-
Problem with the radial filter, I can´t see the elliptical marquee
Hello! I have a problem with the radial filter, I can´t see the edge, the elliptical marquee when I select, the effect so I can´t change the Center or the size. How can I see it again? Thank you
Press the "H".
-
HP Color Jet CP5525: problem with upgrading the firmware on cp 5525
Hello!
Just upgraded my HP Color Jet CP5525 firmware "cljCP5525_fw_2305090_000453".
It seemed very well att first, but after a print I get error message 80.00.04 'problem with jetdirect '.
Any suggestions?
Fixed streaming t back to factory settings. Strange solution, but I stopped Esser with it now ha ha
-
Color laserjet 4600 - problem with one color (yellow) for the most part does not print
Colors look purpleish when printing photos. It turns out that this is a problem with yellow print.
We tried to replace the yellow toner cartridge, and it was not fixed.
PQ troubleshooting, the yellow page is empty except for a thin (16th of an inch) to 99% a horizontal line at the top of the page.
In the configuration page, all the different areas that should have the yellow are mostly empty, with the exception of the same sort of thin horizontal line at the top of each of these areas. After updating the firmware from 03.001.0 to 03.016.0: in addition to what is described on the configuration page, some of the fields in the configuration page that should be yellow, have a pale magenta and more this yellow line.
Our technician came several times and has so far tried to replace the hvps, scanner laser, toner alignment and trainer kit Board. Nothing has improved the question. Then for the replacement is the regulator dc ($1000).
Anyone here have an opinion on what could cause this problem? It seems they are just throwing parts at home and we're about to tell them to give up.
It wasn't the dc controller. I figured out well out - somehow, there was a spring missing behind one of the speeds in the train of drum roll.
-
Problems with high solution Adobe programs
Hello, I have a few problems with my screen solution and Adobe programs. My pc has a very high screen solution, and it creates problems with the Adobe programs such as photoshop, illustrator, InDesign and so on. If the texts in the programs become very little and it is impossible to work with her. I tried to get help with it professionals at the school, but they couldn't fix it. Because they said that this is a problem with Adobe, not my pc programs. Please help me
Hi fatoumata,.
If you are having problems with Photoshop Cs6 check this thread on high-resolution screen Windows 8.1 CS6
For Photoshop CC see HiDPI and Retina Display support FAQ for Photoshop
Kind regards
Assani
-
At the time I upgraded to Panther snow, I experienced a loss of use of the function scanner on my printer HP 4500 scanner so that I am able to use the printer function. I was advised to try to solve the problem with a Capture of Image Download. Where can I get the right version and how should I proceed? Is it free?
The communication problem that prevented initialization of the printer by the CCM has been resolved by removing the plug from the printer into a power strip and attaching directly to the socket in the wall. Thanks to the Member who posted the idea.
-
Hello
I have a performance problem involving high line response to locking conflicts that I can't wait.
The application updates the specific table about 1200 times for my AWR report representing 2 hours.
This update represents 98% of the db_time and wait to enq: TX - line lock conflict is:
-83 796 waiting
-245 441 seconds
The application updates a row both an unprecedented SELECT UPDATES. This is the query:
Update my_table set creationtime =: 1, modificationdate =: version 2, =: creationuserid 3, =: fortesting 4, =: 5, modificationuserid =: participation_uuid 6, =: actimenucontact 7, =: allegroid 8, =: campaign_uuid 9, =: desjardinsemployeetype 10, =: effectiveparticipationtype 11, =: family_uuid 12, =: fetchpasseport 13, =: 14, healthratingfilldate =: hoursofsleeptimecommitment 15, =: igaid 16, =: initialsubscriptiontype 17, =: minutesofsleeptimecommitment 18, =: goal 19, =: partner_uuid 20, =: 21, promotionalemails =: 22, readrules =: sccsubscriptionprovenance 23, =: = subscriptionprovenance 24,: 25, supportemails =: where the 26 uuid = : 27 and = version: 28
Clause where is filtering on uuid which is the primary key of my_table.
The uuid is a specific user and two users would not update the same row, what could be the reason for this wait event?
Thank you
Why guess when you know.
Watch ASH data for these events to the queue.
He'll tell you sql id as well.
-
Hi all
I have a question about the high pass filtering in LabVIEW simply based on observation, have never been taught directly on the filters.
A signal of high pass filtering, with a Butterworth IIR filter (2nd order) for example, around the time Fortran, = 0 there is a transition from a high-intensity "false" at a rate expected, as the officer although this is achieved thanks to a program as I have nothing else to hand at the moment. In order to minimize the importance, for the rest of the filtered signal, you can increase the sampling time, change the filter settings or even add time of additional levy in order to truncate it.
Is there an established method to get around this? The reason why I ask is because I'm trying to distinguish accurately Laminar and turbulent parts of a signal of speed but on time = 0, in a completely laminar signal, our method returns false positives for the presence of turbulent structures. I assume that this will always be the case, but it is better to ask first and concluded later!
Thank you.
All filters have a transient initial. You must wait until it has settled on or try to compensate for the spike in some way. Transitional measure also depends on the input (including any noise) signal, it is generally not possible to compensate exactly.
Lynn
-
I have a problem with the numbers. Help, please!
I have a problem with the numbers. I am trying to create a formula that can add a cell only when another cell with a pop-up menu returns on a specific pop. I can't ignore the cell if it is not on specific pop upward.
assuming the cell with pop's cell A1
and if the context menu contains items:
YES
NO.
MAYBE
and the value you want to add in cell A2
You can add the value in cell A2 when the context menu is 'YES' like this
= if(A1="YES", A2, "") +.
where
is the expression that adds other cells if you want could be another cell = If (A1 = "YES", A2, "") + B2
or a range of cells
= If (A1 = "YES", A2, "") + sum (B2, D2, G2:H5)
-
problem with tabs and filter the lines of memory cache
Dear all I have a problem with the oaf page has two tabs under two of them consists of a table and add the button to the row. Second tab, it's a detail of the first tab, which means that each line in the first tab may refer to one or more lines in the second tab, my problem is when I add the line in the first tab and go to the second tab to add lines to this line of the display of the page added all lines not only the matching lines.
my code:
1 - controller
When press Tab of Lot lines (partial action)
If (goLotsTab".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}String trxLineId = "38";//row.getAttribute("TrxLineId").toString(); "
AddLotParam serializable [] = {trxLineId};
am.invokeMethod ("getTrxLot", addLotParam);
}
What press Add button lines of lots (partial action)
If (addLot".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
String trxLineId = "38"; row.getAttribute("TrxLineId").toString ();
AddLotParam serializable [] = {trxLineId};
am.invokeMethod ("addTrxLot", addLotParam);
}When press Add a tab line (partial action)
If (addLine".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
am.invokeMethod ("addLine", params);
}Methods 2 - am
public void getTrxLot (String pTrxLineId)
{
OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
pTrxLineId = linRow.getAttribute("TrxLineId").toString ();If (!) VO.isPreparedForExecution ())
//{
try {}
String existringWhereClause = vo.getWhereClause ();
vo.setWhereClauseParams (null);
vo.setWhereClause("trx_line_id=:1");
vo.setWhereClauseParam (0, (pTrxLineId) Number);
vo.executeQuery ();
vo.setWhereClauseParams (null);
vo.setWhereClause (existringWhereClause);
}
catch (Exception exceptionl)
{
throw OAException.wrapperException (exceptionl);
}// }
following line is commented, but I think that it will contribute to the memory of the filter
cached data to be mapped.Rank [] lotRows = vo.getFilteredRows ("TrxLineId1", pTrxLineId);
}/////////////////////////////////////////////////////////////////
public void addTrxLot (String pTrxLineId)
{
OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
pTrxLineId = linRow.getAttribute("TrxLineId").toString ();If (vo.getFetchedRowCount () == 0) {}
vo.setMaxFetchSize (0);
// }VO. Last();
VO. Next();
Line = vo.createRow ();
row.setAttribute ("TrxLineId", pTrxLineId);
vo.insertRow (row);
row.setNewRowState (Row.STATUS_INITIALIZED);
}OK, I'll share my latest code using other
public void createTransaction() {}
OAViewObjectImpl vo = getXXSiteHeaderVO1();
If (! vo.isPreparedForExecution ()) {}
vo.executeQuery ();
}
If (vo.getFetchedRowCount () == 0)
{
vo.setMaxFetchSize (0);
}
String status = "incomplete."
OADBTransaction txn = (OADBTransaction) getOADBTransaction ();
- oracle.jbo.domain.Date currentDate = txn.getCurrentUserDate ();
Line = vo.createRow ();
row.setAttribute ("TrxStatus", status);
- row.setAttribute ("TrxDate", currentDate);
vo.insertRow (row);
row.setNewRowState (Row.STATUS_INITIALIZED);
}
{} public void addLine (String pTrxHeeaderId)
OAViewObject vo = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();
VO. Last();
VO. Next();
Line = vo.createRow ();
int linNum = vo.getFetchedRowCount () + 1;
row.setAttribute ("TrxHeaderId", pTrxHeeaderId);
row.setAttribute ("LineNum", String.valueOf (linNum));
row.setAttribute ("SelectLineFlag", "Y");
vo.insertRow (row);
row.setNewRowState (Row.STATUS_INITIALIZED);
}
Public Sub getTrxLot()
{
LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();
Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();
linVo.setCurrentRow (linRow);
OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();
}
Public Sub addTrxLot()
{
LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();
Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();
linVo.setCurrentRow (linRow);
OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();
VO. Last();
VO. Next();
Line = vo.createRow ();
row.setAttribute ("TrxLineId", pTrxLineId);
row.setAttribute ("RowKey", new oracle.jbo.domain.Number (1));
vo.insertRow (row);
row.setNewRowState (Row.STATUS_INITIALIZED);
}
-
Help with the removal of the pixels of color to Bw Images with a grain filter
Hi, what is the best way to remove color pixles to convert images p.c. with a grain filter?
You say that the grain filter is presenting the color noise in an earlier B & W image? This filter Grain has a monochromatic setting? Or just add a B & W adjustment layer.
-
Nook Color ereader &; connectivity problems with router WRT610N
I recently bought a new Nook color ereader for my wife. As long as a network administrator, I thought that this would be an easy task to configure the ereader to connect with my Linksys WRT610N router on the 2.4 Ghz band. But I'm running problems when connecting. The question seems to have intermittent connection problems where the meals seem to see the wireless network, authenicates, tries to get an IP address, then connects for a short period or removes the signal very quickly while being right on top of the router with the device.
By the recommendations of various forums of Nook, I had the best luck with the following...
2.4 Ghz band settings
SSID: NookNetwork
Channel width: 20 GHZ
Standard channel: 9
SSID Broadcast: enabled
Security mode: WPA2 Personal
Encryption: AES
Passphrase: set out
Key renewal: 3600
UPNP: disabled
RTS: default
Defragmentation: default
Tag: default
However, the problem still resides in an intermittent connection to the wireless network. I also tried various arrangements of the channel to both channels 1, 6 and 11 with my best cponnecting chance to channel 9. I also played with the security and disabled all together and have plugged but always file (will not however run the unsecured network). Also try a tag value of 75, a framework of fragmentation of 2306 and 2307 RTS setting. My computer laptop while run and connect properly.
I use the latest software updated both on the color of the corner. I am at the end and have searched high and low to get suggestions, and have not yet reached a compatible connection. Please help... Thank you! And my wife thank you in advance! Smiles!
Mike
Hi death,
Thanks again for your comments and your concerns. Really appreciated!
I took your advice and contacted Barnes & Noble for a new replacement and am waiting for the reception of the new unit as I type. If all goes well, we have reduced the problem and the replacement ends at our misfortunes... smiles!
I'll let you know...
Mike
Maybe you are looking for
-
Anything El Capitan 10.11.4 printing displays only a header and footer or a blank page
I can't print the PDFs, preview or Acrobat. The pages are made on the monitor. Pages print blank pages. Cannot print copies of TurboTax. Print an e-mail by mail only prints the header - NO CONTENT! Hope someone can offer a solution. Thanks in advance
-
Tecra R840 - WLAN disable when LAN connected
In my business, use the Tecra R840 Notepad and to improve the situation, we are considering turning off wifi when we put on cable network. We found that the last other models from other manufacturers have this option in the bios called "WLAN / WAN sw
-
PAGE_FAULT_IN_NONPAGED_AREA
HelloWhen I went to put my PC Windows XP standby last night, I saw a message to shut down my PC in order to install a Microsoft Update, so I stop the PC. This morning, when I tried to start my PC, I get a blue screen with white letters indicating:"A
-
Is it necessary to have PowerShell on the computer?
Hello. I use Win XP Prof and IE 8. I had problems with Windows Update so I run the utility "FixIt" and it solved the problem of Windows Update, but "PowerShell" has been added to my list of program but does not appear in Add/Remove programs. Can I re
-
BlackBerry smartphone Will this phone have the feature of 3G?
Like the iPhone, "BOLD", etc. Will it have 3G?