Satellite 100-049-engraver of DVD writes only a few files and then fails

Similar Questions

• Windows 8 stuck in reboot loop ' your pc encountered a problem and needs to restart. We collect only some error information, and then let's restart for you"

  My laptop was working fine last night, but I left it on and unplugged and he died. This morning, I'm an endless loop of ' your pc encountered a problem and needs to restart. We collect only some error information, and then let's restart for you"

  the message appears for a second and then the VAIO logo reappears before the pop blue screen for a second. This goes just forever with no additional info. I can see an additional line appear on the blue screen every time everything as it turns off so it is unreadable.
  Help please?
  more information: the percentage never bar going past 0% it pop right to the top and back immediately to the VAIO screen.

  Hi Wesley,

  This problem could be due to corruption of the system files, I suggest you try to perform auto repair using Windows 8 disc of Windows recovery environment (WinRE) and check if it helps.

  To run auto repair on follow computer Windows 8 as follows:

  a. Insert the media (USB or DVD) and restart your computer.

  b. press on the key F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.

  c. once the Windows Setup window appears, follow these steps:

  d. click Next and select repair your computer.

  e. you will see an option to choose and then a blue screen. Choose the troubleshooting option and select advanced options.

  f. you can choose automatic repair of the advanced boot option.

   

  Keep us updated on the status of the issue.

• Wiindows problem 8 -:(votre pc tombé sur un problème et doit redémarrer.) We collect only some error information, and then we'll restart for you

  I own "Lenovo Ideapad Z570-1024 AFU" model computer laptop, which came with windows 7 Home Premium. I've updated with "Windows 8 Pro.

  I had a problem in my laptop and lenovo people changed my laptop motherboard. From there I'm not able to boot in Windows 8 OS and it is continuously restart saying: "your pc encountered a problem and needs to restart. We collect only some error information, and then we'll restart for you. "You can search internet error: WHEA_UNCORRECTABLE_ERROR.

  I tried all recovery options and reset options proposed in the Windows 8 Pro DVD. I tried to install the new copy of windows 8, but still, I get the same error.

  Now the hard drive is empty with no BONE in there. But yet when I try to install 'Windows 8 Pro' is a short walk, and after that start the same error mentioned above.

  Is - this hardware problem? or incompatibility problem?

  Please help me to get this resolved.

  Thank you for your valuable time and information.

  In my case, a hardware problem blocks the installation of any form of windows (windows 7 or windows 8). Yet once, I gave my laptop to the manufacturer to correct the hardware problem (motherboard problem). This time they say «it could be a CPU problem» I'm waiting to listen to their share of the final solution.

  Once again thank you for your suggestion. Implement these if the people of Lenovo does not solve my problem.

  Kind regards
  Srini

• Satellite L350D works for a few minutes and then stop completely

  Hi all!

  I'm having a weird problem with my laptop Satellite L350D-216
  I have used for a long time in a row and is starting to show some strange vertical lines on the screen and the kind of activity let go and then it went completely black
  Since then if I disconnect and leave it for a few hours switches normally and work for 5/10 minutes and turns black again.
  It happens after I worked on it for about 20 hours straight or Yes (can be linked)

  What I tried:
  -Turn on with battery only
  -Turn on only with the ca
  -Remove all and to hold off key for 1 min and then try again the two above

  When it comes on everything seems to work 100% without problem but don't lasts no more than 10 minutes as I said

  Any ideas?
  Thanks in advance

  I can't say for sure, but the problem may be material high temperature. Satellite L350D is not the latest model cell phone and if you use enough difficult I guess laptop is full of dust and cannot be properly cooled.

  Maybe the laptop needs to be cleaned.
  > When it lights up everything seems to be working 100% without problem, but does not last more than 10 minutes as I said
  One more thing: do the quick test. Start your laptop and enter the BIOS settings. Leave it for a while and check if the same thing will happen again.

  Please post comments.

• Impossible to read only to delete files and folders.

  read-only cannot be removed some of my folders and files and I need to do that for my win7 upgrade moved to a new folder, so I can start to install, anyone who can help?

  Hi JornSoer,

  We can try 2 things...

  1. click on start-> run, type &-> cmd-> ok. Now browse the path where your readonly file (easy to open file in my computer and copy the address, now in the command prompt, you can paste the path prefix cd.) It will be c:\ > cd .

  now Type-> attrib - r *. *

  This will remove all files readonly in the folder.

  You can check it by typing-> attrib

  now refresh your folder in my computer and check if it is not marked as readonly.

  2. you can try to take ownership of the folder again by the method listed in http://support.microsoft.com/kb/308421.

  I hope this helps. Option 1 can work for you...

• 'Read only' look for files and folders

  I think a virus entered in my computer and changed 80% of my documents and files in a 'read only' appearance, even if they are still available to make changes and can be saved with the changes. This has happened after the repair of the system by restoring to an earlier date.

  1. Why do you have this happen: was it really a virus?

  2. How can I go back to the previous 'typical' aspect of the documents and records?

  Hello

  What security program is installed on the computer?

   

  Method 1: Strange behavior could be due to the virus.

  Since you can now access files and folders, you can run the virus scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Method 2: You can also check:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

• Delete only a few files from the recent open those

  I would like to delete some files in the recently opened files only leaving the most used in the list, that is, I don't want to delete all the files in the list, the only option I have in the menu. I managed to do that but can't remember how I did. I use PS CC 2015.1.2.

  Do not delete the files; Move them to another location. Then, click on the files in the list of recent files. Photoshop will not find files and removes them from the list.

  You can then return the files to their original location.

  There is no other way to selectively remove the files in the list.

• Satellite 2450 S203: Cannt burn DVDs but only of CD

  Hi my computer allows me to record on CD, but not on DVD. Should what drivers I download?

  Satellite S2450 - S203

  Help!

  Hello

  This has nothing to do with the wrong drivers or missing drivers!

  Are you sure that the internal laptop drive supports burning DVDs and not only reading DVD and CD RW?

• Satellite A50 - starting possible USB DVD writer external?

  I have a Satellite A50-11 four years old, I need to format a partition of the hard drive (the one with XP) installed but my DVD burner is broken.
  My BIOS supports booting by an external DVD burner? Where it shouldn't, should I have any other possibility?

  Thank you

  I doubt that this could be possible

  As far as I know the BIOS supports booting from HARD, ODD, LAN and USB FDD (floppy) disk

  See you soon

• DVD - RW DVR-K17LF for the Satellite series does not read DVD but only to CD

  Hello

  I have a serious problem with my DVD player.
  He stopped to work. I mean, he's not reading CD but not DVD discs.
  I don't know what the problem is.

  I went on the internet and found no solution.

  Please help me.
  It is not a software problem, because my laptop does not start the DVD, but due to the CD...

  Hello

  The issue could be linked to the anomaly of the player's laser lens.
  Maybe the lens can not handle the DVD because of a physical constraint.
  In most cases, the lens can not calibrate properly and therefore different media would not work.
  In this case there is not much to do in most of the cases that the drive needs to be replaced.

  But maybe you could try to clean the drive s laser lens using a cleaning professional who could be bought from the other computer dealers.
  I don't very well if this will help but it s worth to try m

  PS: Try this:
  Remove the drive from Device Manager, access the registry and remove the filters top and bottom of this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the laptop and check the functionality of s by car.

• Satellite L550D R815 - engraver of DVD not recognized in external programs

  I have a problem, my dvd burner is not recognized by external programs such as Ace CD Burner or CdBurnerXP. I can burn DVDs and CDs in windows, but I want the added functionality of these external programs.

  I searched on the site of toshiba for updated drivers, but there are none, and Googling TSSTCORP CDDVDW Ts - l633P Ata Device (this is what is listed under my CD-ROM in Device Manager) gives no useful result.

  If it's any help the device type is listed as: Dvd/Cd Rom and manufacturer readers is (Standard CD-ROM drives)

  All do you know of any other driver that I can use to make accessible to other programs? You can provide any help would be greatly appreciated.

  Thank you

  Bob Fischl

  Edit: I found the program included Toshiba dvd burner and it recognizes.

  > I found the program included Toshiba dvd burner and it recognizes.
  Thanks for the comments!

• How to save only a few forms and historical research

  I want to only do Firefox back up my personal emails and never save anything else (if someone has used my computer and uses e-mail address for example).

  When you autofill forms that you can use, try this addon -Auto form fill. I have not tried this and do not know if this supports the recording of information by user, instead of each site.

  Another option is to protect your profile with a password and allow other users to use a guest profile. This extension, which, oddly does not not part of the Addons.Mozilla seems to make this password protect profile in Firefox.

  I'm not 100% sure why this extension is not part of the site on Mozilla Addons, so I ask you to try first before you install it for everyday use. And of course, please save your profile data before trying these extensions.

  Thank you

• fwrite error: try to write 26 bytes of file and the problems

  I'm writing 26 Hex bytes data file using fwrite and I have unknown problems because of which has written 27 bytes

  /////////////////////////////////// Code ///////////////////////////////////////////////////////////////////
  FILE * READ;
  READ = fopen ("DataReceived.dat", 'w'); opening the file for writing

  unsigned char data2send [26] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
          
  data2send [0] = 0xEB; conferment of the data
          
  data2send [1] = 0 x 90; conferment of the data

  data2send [10] = 0x08; / / data assignment
           
  crcsent = calCRC16 (data2send, 24); calculation of 24 bytes CRC and the addition of crc (16 bit) to last two bytes of data
          
  data2send [24] =(crcsent>>8) & 0xFF; Added to the second last octet CRC
          
  data2send [25] = (crcsent & 0xFF);   CRC has added up to the last byte
         
  If (ComWrt (coms, data2send, 26) == 26) / / send data to com port
  {
               
  fwrite (data2send, 1, 26, READ); ===> writing data in the file where there is problem
      
  }
  /////////////////////////////////////////////////////////////////////////////////////////////////////////////

  Production (WRITTEN in the file) should be:

  0xEB 0 X 90 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 x 00 0x0A 0xA1

  Output that I get the file (which is incorrect) and do not do because I've specified 26 bytes to write

  0xEB 0 x 90 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 x 00 0x0D 0x0A 0xA1

  How 0x0D is added to my data, even though I'm only add data Byte 0,1,10,24,25

  When I write 26 bytes then how 27 bytes are written to the file?

  Thanks in advance

  arfaoui

  I can only imagine that the problem may arise from opening the file in text mode and write on it (0x0A) a line break character: the system can automatically add a CR (0x0D) in order to maintain the standard CRLF. Try opening the file in binary mode instead (fopen with "wb" specification).

• I have problems with my internet connection only, it keeps freezing and then ask 'end now' and give me and error report. How can I fix it?

  I no problems with any other part of my computer this. I spoke with the standard of the internet, and they said it was something wrong particular to my computer only.

  Hello

  -Did you change on your computer before the show?

  Follow these steps and check if the problem persists.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  If the Internet works in safe mode with networking, I suggest you to start your computer in a clean boot State in order to eliminate conflicts of third party software.

  Note: The steps in the article to restart your computer as usual.

• Unchecking read only attribute on files and folder, subfolders does not persist

  I'm trying to disable the read-only attribute in the properties of a folder in the file system.  I uncheck this attribute, I say, too, that he would do that by clicking on apply, then it does to all files, folders, and subfolders... etc and it does.  Then I click ok to close the properties box.  If I reopen it the properties box, the read only attribute is on again once.  I tried several times but keep having the same problem.  I am logged in as administrator.

  How to keep turning off the read-only attribute?

  Do you mean that the read-only box is blue? This does not mean that the read-only attribute is on.

  See this: http://www.vistax64.com/tutorials/107890-read-only-file-folder-attribute.html