How to apply the patch to power supply in an environment of dataguard

Similar Questions

• How to apply the Patch

  Dear friends,
  
  My current database is 10.2.0.1.0. I checked my setting compatible file init.
  
  I would ask my patch to upgrade to 10.4.
  
  Its a file exe and when I run I don't know if I should install it in the same folder and the same House. I tried different location House and different but it says that it must be in the current House.
  
  Otherwise, it shows errors awt.dll is not available, written by another process. I did stop my database and stop all the necessary services.
  
  I also tried to use the same location but different host.
  
  Please guide me on how to go about it.
  
  I'm working on Windows Server 2003, Enterprise Edition.
  
  Thank you.
  
  Published by: user645399 on 24 Sep, 2010 09:53

  user645399 wrote:
  If my existing Oracle home is Ora1 and located at c:\oracle\products\db_1, can I install this patch exactly at the same House and the same?

  Yes. In fact, the section that you pasted said to do exactly this.

  You must install it in an existing base of Oracle 10 g Oracle home.

  The reason for which you found the file misuse is probably because you have some software running that uses binary files in the Oracle home. This could be a database, customer, no matter what.

  If you really believe that you have everything off then the next action plan, I would recommend would be to put Windows Services to manual and reboot the server. So try and apply the patch. I've seen this behavior before in a Windows environment.

• How to control the TTi QL564P Power Supply with USB connection?

  Hello

  When I connect the TTi QL564P power supply via the USB port I see not on MAX (peripherals and interfaces) the virtual serial connection. With GPIB, everything works great!

  I already downloaded the latest drivers on the site of the IFG.

  And I created a simple VI like this:

  OPEN--> VISA VISA WRITE ('V1?") --> DELAY (0.1 s)--> READING of VISA--> VISA CLOSE

  (works via GPIB, does not work via USB)

  VISA OPEN I have the name of resource VISA only the LPT1 and COM1 ports available... so where is the USB port (this virtual serial port, case)?

  VISA GPIB resource name is the ALIAS that I set on MAX...

  Thanks for the help

  OK, the solution was... on the front panel of the power supply, I replace the USB bus (I had default GPIB )

• How to apply the patch in oracle 12 c

  Hello

  Is there a correct way to apply a patch in oracle 12 c.

  Database is up and running (in open mode / read, write)

  No application is connected to the database

  But it seems that his is not successful.

  [oracle@localhost 19504744] $ opatch apply

  Setup Oracle interim Patch version 12.1.0.1.10

  Copyright (c) 2015, Oracle Corporation.  All rights reserved.

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  Check the environment and performing preliminary controls...

  Skip patch 19504744 list of patches to apply: this patch is not required.

  After ignoring the patches with missing components, there are no patches to apply.

  OPatch Session is complete warning.

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  
  

  cat /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     OPatch invoked as follows: «apply - invPtrLoc /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc»

  [December 7, 2015 02:06:59]     Could not make central inventory using NGOUI; oracle.sysman.nextgen.utils.NextGenInventoryUtil

  [December 7, 2015 02:06:59]     YES-67077:

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  YES location: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oui

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     History of patch file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-1]: after call to installInventory.getAllCompsVect (): 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-2]: before loading cooked a stop: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-3]: after loading before loading minipatch and rawOneOffList list in a cooked off: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-4]: after completing cookedOneOffs and when the inventory is loaded...: 23 (MO)

  [December 7, 2015 02:07:01]     Check the environment and performing preliminary controls...

  [December 7, 2015 02:07:01]     Checking for conflicts between the colonies...

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail start-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Adapter can go list: 19504744

  [December 7, 2015 02:07:01]     Not need adapter list:

  [December 7, 2015 02:07:01]     List of self-catering maps:

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail thin-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Intra-conflict control PASSED

  [December 7, 2015 02:07:01]     Checking whether Oracle Home has components required by tasks...

  [December 7, 2015 02:07:01]     Check if the "19504744" patch is a patch of no-op.

  [December 7, 2015 02:07:01]     Opt. comp. not in inventory OH: oracle.rdbms, 12.1.0.2.0

  [December 7, 2015 02:07:01]     [oracle.rdbms, 12.1.0.2.0]

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not required.

  [December 7, 2015 02:07:01]     CheckMissingComp: hash match, re - build SWFs

  [December 7, 2015 02:07:01]     YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [December 7, 2015 02:07:01]     UtilSession: N-apply is.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     The following warnings occurred during execution of OPatch:

  ([7 December 2015 02:07:01] 1) YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  [December 7, 2015 02:07:01]     Finishing UtilSession in Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  1. not a correct way to apply the patch

  2. you must stop your database - instance. Since patch applies it would execute a re-release of links (as the binaries are access it would apply)

  Look in your current patch its not needed

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not necessary. (if you can't find the question)

  
  

  Please refer to the documentation opatch 12 c, atleast see the patch readme.txt (Please spend some time this basic thing every DBA should do - do not jump).

  
  

  Update:

  
  

  Check the environment and performing preliminary controls...

  Jump list of patches to apply 19504744 patch : this patch is not necessary.

  
  Clearly it indicating information
  

  -Pavan Kumar N

• How to apply the patch for Hyperion System 11.1.1.3?

  Hi all
  
  We are on Hyperion System 11.1.13 and we intend to switch to IE8 by the company. I know that there is a possible problem with IE8 with space work and financial information. When I did the research, it shows that we must apply the following hotfixes. I've done system Hyperion 11 facilities several times but I never have patches. Difficult to apply patches and correct possible risks if we do not? can someone please post how to apply patches?
  
  EMP Workspace (with patch 9314073), Financial Reporting (with patch 9657652).
  
  Thank you

  Opatch backup means more likely to make a backup of the phone book file Opatch, regarding installing the patch instructions must be reading me.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to apply the Patch to install CD

  I would like to integrate fixes from build 515841 on a CD (in fact, a USB key) trying to install ESXi5 469512 transformation.

  Is this possible?

  What is the purpose of the 'UPGRADE' on the CD directory. Could it be used to update an installation? Its content looks like a zip of maintenance.

  You can use to create an ESXi installation with a custom set of ESXi image updates and patches using ESXi Image Builder CLI.

  See the link below

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=/com.VMware.vSphere.install.doc_50/GUID-48AC6D6A-B936-4585-8720-A1F344E366F9.html

• lyingWhen application of a fix via ADOPTION, he failed with the AutoPatch error: you must be in Maintenance Mode to apply the patches.

  Everything by applying the patch Patch 18345006 as explained in Doc 1981206.1 , in the phase to apply it, I get the error

  AutoPatch error:

  You must be in Maintenance Mode to apply the patches.

  You can use the AD Administration utility to set the Maintenance Mode.

  I'm on Oracle EBS 12.2.4, Windows 2008 R2 x 64, 2 appl_tops not shared and the error occurs on the primart node.

  How I applied the patch

  source, run fs

  adoption phase = apply patches = 18345006 = no allnodes

  The issue was that my tns ifile was entered incorrectly for _PATCH entered tns. After having corrected the phase to APPLY fine.

  Apparently, the maintenance mode error is just a smoke screen

• Update Windows shows about 100 updates important to apply. How would you recommend I do. I'm afraid to apply the patches to 100 at a time. Those who would be safer to start with? Thank you

  The manufacturer has replaced the HD on my computer laptop 64 bit Windows 7.  Update Windows shows about 100 updates important to apply.  I can't find patches that I had previously applied in the list of applied hotfixes or patches to apply list.  I don't understand why this is.  How would you recommend I do.  I'm afraid to apply the patches to 100 at a time.  Those who would be safer to start with?

  Thank you

  Hello

  I suggest you only begin to install the important updates (recommended) first and later if you want you can install optional updates. All Windows update are safe to install and it is important to install the update and recommended by Microsoft. It keeps your computer safer and your software current to date and if you want Windows to install important updates as they become available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically.

  For more information, take a look at the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

• How to apply the 9874305 patch

  Hi all
  
  I must apply the patch 9874305 .
  
  Read me file that I found no instructions how to apply this hotfix, even on applications of services should be upwards or downwards.
  
  Here's this file
  
  Help, please
  
  Kind regards.

  Salvation;

  can we apply this action plan onlline productuion instance is turned?

  All first please do not post details of notes metalink on a public place because of the interoperability pollicy, thatswhy Please edit your first post.

  Secondlyi the readme file does not, you must close your apps services but either incidentally, I recommend nearby services and apply the fix. Second present before patch be sure whether or not you have 6372396 on your system. If you are at this level or higher

  1. close apps services
  2. use adadmin and take your system in mode manitanance
  3. fix appy using adadmin utulity
  4 turn off the manitanance mode
  5 open services
  6. check simultaneous and run only one application and make sure that its compliated

  Respect of
  HELIOS

• How to apply RUP6 (patch 6728000) during the installation of the single node?

  Dear
  
  On single node configuration, we have installed Oracle Apps R12.0.4. Now I need to apply RUP6 (patch 6728000). In what order should I apply the patch? According to my knowledge "u*.drv" type patches must be applied to both AS & DB level. I thought to do like this covered, Source Apps*.env, AS stop, mode adadmin (interview), adpatch, startAS. But DB must be up & running in this process. After that, I have to apply this hotfix on DB also stop DB &?
  
  Need help!
  
  Concerning

  Naya,

  I thought to do like this covered, Source Apps*.env, AS stop, mode adadmin (interview), adpatch, startAS. But DB must be up & running in this process.

  Fix.

  After that, I stop DB & also the application of this fix on DB?

  No, because you have already applied the patch as a user applmgr and already patched the application layer as well as the database layer. Thus, simply disable maintenance mode, start the services application, and access the application.

  Make sure that you follow all the steps in the Readme of the patch and (Note: 743368.1 - Oracle E-Business Suite Release Update Pack Readme, release 12.0.6).)

• Equium A200-1VO - what could be done to improve the situation of power supply?

  I recently bought an Equium A200 1VO as one second laptop - my other (an Aspire) is excellent, but a bit heavy in the basket to autour. Anyway, it seemed fabulous value and has worked very well so far - but I just discovered a catch today, the low battery life. I understand that this gap is shared with most of the other laptops of a comparable weight.

  In any case, I wonder what could possibly be done about (I often use my laptop while on the move, in locations without power outlet available, and less than 1 hour of power is very restrictive (I know powersave and others)-especially compared to my other laptop which is about 3 hours on battery)?

  Is there a portable power charger (the type with which you can load to the top of their rechargeable batteries on the sector, then take them and be able to charge mobile phones, iPods, etc. several times without needing an external power supply), as the Proporta one, who could charge a laptop as well (well, this laptop)? And how about the 9 cell Li-ion battery that sell Toshiba (or for that matter, one 6 cells)?

  How long will pretty much those give me? Are there other types of batteries that can be purchased for an extra life?

  Any suggestions on how I could get more autonomy would be most appreciated.

  Hi guys

  > what could be done to improve the situation of power supply
  You could buy a stronger battery which delivers more power for a long time
  You should take a look at the value of mA; more better ;)

  Also please don t forget that the Vista operating system needs more power as an early OS like XP.
  Vista needs more power because it wastes more computing resources.
  I read that a same notebook would run 2 times longer on battery with preinstalled W2K or XP.

• Strange worker has no reasons when applying the patch 17529626

  Dear all,

  I am applying the patch 17529626 on platform EBS R12.1 Linux X 86-64. So I am facing the following problems:

  1:

  An error occurred during re-Association of the application programs.

  Continue as if it was successful [No.]: Yes

  I answer 'Yes' to continue such patch recommended in some other discussions of Oracle.

  2: after spending the step that precedes the adpatch blocks in the following lines:

  IMPOSSIBLE: folder ap_holds_all.xdf worker 1.

  IMPOSSIBLE: folder zx_import_tax_lines_gt.xdf worker 2.

  ATTENTION: Fix the worker failed above the Manager to continue.

  
  

  I checked the logs of the worker, and I got the following:

  1:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  INFO: An additional column LAST_UPDATED_BY exist in the target database

  The AP_HOLDS_ALL table is absent from the LAST_UPDATED_BY column

  WARNING: The missing column is NOT NULL and there is no default to apply

  Add a nullable column with the statement

  Executing statement

  ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Start time for the above statement is kills Sep 20 23:42:21 THIS 2015

  End time for the above statement is kills Sep 20 23:42:21 THIS 2015

  Error in the statement ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 Oct 23:42:21 THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:42:21

  Assignment 2:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  The ZX_IMPORT_TAX_LINES_GT table is missing the column ATTRIBUTE1

  Executing statement

  ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Start time for the above statement is kills Sep 20 23:41:59 THIS 2015

  End time for the above statement is kills Sep 20 23:41:59 THIS 2015

  Error in the ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 23:41:59 Oct THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:41:59

  So I checked the two tables for these columns:

  DESC AP. AP_HOLDS_ALL: LAST_UPDATED_BY NOT NULL Number (15) exists

  DESC ZX. ZX_IMPORT_TAX_LINES_GT: Attribut1 VARCHAR2 (150) exists

  Now, I'm confused and I don't know how to solve this problem, please help?

  In addition, I tried to restart the worker through adctrl, they have been restarted but still runing for a very long time!

  Thank you very much for your help!

  Concerning

  Moussa

  Please check

  Errors in applying the Patch 15966842: R12. AP. B (Doc ID 1535742.1)

  Patch is different but the error is the same

  concerning

  Pravin

• Apply the patches OBIEE 11 g

  Hi all
  
  Currently we use OBIEE 11.1.1.6.4 someone is 6.4 before patch. Now I need to apply 11.1.1.6.10 patch set. I download all the 6.10 patches.our weblogic server version 10.3.5.0
  Please help how to apply patches to the linux environment and can share any document to apply the patches.
  
  THX,
  ANI

  Make sure you have these configuration paths correctly using command line

  FMW_HOME = your installation directory eg:(/u01/middlewarehome/Oracle_BI1)
  $ FMW_HOME/Oracle_BI1 CD
  Export ORACLE_HOME = $PWD
  export PATH = $ORACLE_HOME/bin: $PATH
  Export JAVA_HOME = $ORACLE_HOME/jdk
  export PATH = $JAVA_HOME/bin: $PATH
  export PATH = $ORACLE_HOME/OPatch: $PATH

  If you have the wrong oracle_home then it will lift these errors

  It may be useful

• Update 11.2.0.1 to 11.2.0.2 and apply the patch set update. CARS CARS CARS

  Hi all
  
  I am new to ORACLE RAC, I just want to know how to install or upgrade existing oracle 11 GR 2 on CARS.
  
  We have RAC on solaris 10 64-bit. Here is the result of the database instance.
  
  SQL > SELECT * FROM SYS. V_$ ACTIVE_INSTANCES;
  
  INST_NUMBER INST_NAME
  ----------- ------------------------------------------------------------
  1 testdev1:DEVT1
  2 testdev2:DEVT2
  
  So on sever testdev1 whe running instance DEVT1 and break in testdev2 DEVT2 is running.
  
  Current database version is 11.2.0.1.0... I want to update, or apply the patches 11.2.0.2.0 scheme.
  
  I want to do the upgrade out of Place (i.e. create new oracle home and install oracle)
  
  I successufully standalone update DB (No. CARS) but I'm not having experience in the CCR.
  
  Can you please guide me, or send me the link of the document that I follow to upgrade database RAC 11.2.0.1 to 11.2.0.2.0
  
  See you soon.

  MOS Doc-things to consider before moving to 11.2.0.2 Grid Infrastructure/ASM [ID 1312225.1]

  Steps to upgrade 11.2.0.1 RAC to 11.2.0.2
  http://abbasocp.blogspot.in/2012/03/steps-to-upgrade-11201-RAC-to-11202.html
  http://askdba.org/weblog/2010/10/steps-to-upgrade-11201-RAC-to-11202/

• Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES

  Anyone tried the installation with the new Option of software updates?
  
  I'm going to install grid RAC 11 GR 2 and I intend to do the following steps:
  (1) install the Oracle Grid Infrastructure 11.2.0.2 patch group
  (2) make all configurations with YES
  (3) create ASM disks
  (4) install Oracle Database 11.2.0.2 software only
  (5) apply recommended patches 11.2.0.2.2 Oracle (12311357) and 12431716. (Ref. MOS doc [756671.1 ID])
  (6) create the RAC (advanced option) with DBCA database
  
  With these steps:
  Grid and ASM disks would be configured without the recommended patches, but the database will be created with applied patches.
  
  I would not do a "Software only" install IM and then apply the patches because later I would have to manually do all the configuration steps.
  
  If I use the Option of YES software updates to apply patches, YES makes the adjustment, and then I would set up the GRID with YES?
  
  Quote from Oracle® Setup Guide Network Infrastructure 11 g Release 2 (11.2) for Linux - E17212 number of part-11:
  'Use the feature of dynamic download and apply software upgrades of software updates as part of the installation of the Oracle database. You can also download updates separately using the downloadUpdates option and later to apply during installation by providing the location where updates. »
  
  I could not find more detailed information on this feature in the documentation and MOS.
  
  Thank you

  Hello

  You can download the latest updates and patches to help with option - downloadUpdates

  ./runInstaller -downloadUpdates
  

  You can use this note:

  * How to download the latest updates and patches using 11.2.0.2 YES [ID 1295074.1] *.

  Don't miss...
  * Error: INS-20704 while installation 11.2.0.2 with Option 'use downloaded software updates' [1265270.1 ID] *.
  : Note ensure that the user download the updates of patches have own/correct permission to download updates to patch to MOS (My Oracle Support).
  Do not use the directories/tmp/oraInstall * for the download location. New bug 9975999

  Documentation explaining...
  4.5.1 running Oracle Universal Installer
  Download of updates before Installation
  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH

  Kind regards
  Levi Pereira