Update Windows shows about 100 updates important to apply. How would you recommend I do. I'm afraid to apply the patches to 100 at a time. Those who would be safer to start with? Thank you
The manufacturer has replaced the HD on my computer laptop 64 bit Windows 7. Update Windows shows about 100 updates important to apply. I can't find patches that I had previously applied in the list of applied hotfixes or patches to apply list. I don't understand why this is. How would you recommend I do. I'm afraid to apply the patches to 100 at a time. Those who would be safer to start with?
Thank you
Hello
I suggest you only begin to install the important updates (recommended) first and later if you want you can install optional updates. All Windows update are safe to install and it is important to install the update and recommended by Microsoft. It keeps your computer safer and your software current to date and if you want Windows to install important updates as they become available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically.
For more information, take a look at the following link:
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates
Tags: Windows
Similar Questions
-
Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES
Anyone tried the installation with the new Option of software updates?
I'm going to install grid RAC 11 GR 2 and I intend to do the following steps:
(1) install the Oracle Grid Infrastructure 11.2.0.2 patch group
(2) make all configurations with YES
(3) create ASM disks
(4) install Oracle Database 11.2.0.2 software only
(5) apply recommended patches 11.2.0.2.2 Oracle (12311357) and 12431716. (Ref. MOS doc [756671.1 ID])
(6) create the RAC (advanced option) with DBCA database
With these steps:
Grid and ASM disks would be configured without the recommended patches, but the database will be created with applied patches.
I would not do a "Software only" install IM and then apply the patches because later I would have to manually do all the configuration steps.
If I use the Option of YES software updates to apply patches, YES makes the adjustment, and then I would set up the GRID with YES?
Quote from Oracle® Setup Guide Network Infrastructure 11 g Release 2 (11.2) for Linux - E17212 number of part-11:
'Use the feature of dynamic download and apply software upgrades of software updates as part of the installation of the Oracle database. You can also download updates separately using the downloadUpdates option and later to apply during installation by providing the location where updates. »
I could not find more detailed information on this feature in the documentation and MOS.
Thank youHello
You can download the latest updates and patches to help with option - downloadUpdates
./runInstaller -downloadUpdates
You can use this note:
* How to download the latest updates and patches using 11.2.0.2 YES [ID 1295074.1] *.
Don't miss...
* Error: INS-20704 while installation 11.2.0.2 with Option 'use downloaded software updates' [1265270.1 ID] *.
: Note ensure that the user download the updates of patches have own/correct permission to download updates to patch to MOS (My Oracle Support).
Do not use the directories/tmp/oraInstall * for the download location. New bug 9975999Documentation explaining...
4.5.1 running Oracle Universal Installer
Download of updates before Installation
http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/inst_task.htm#BABJGGJHKind regards
Levi Pereira -
I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?
Have you done something after their show.
-
Hi all
I am new to ORACLE RAC, I just want to know how to install or upgrade existing oracle 11 GR 2 on CARS.
We have RAC on solaris 10 64-bit. Here is the result of the database instance.
SQL > SELECT * FROM SYS. V_$ ACTIVE_INSTANCES;
INST_NUMBER INST_NAME
----------- ------------------------------------------------------------
1 testdev1:DEVT1
2 testdev2:DEVT2
So on sever testdev1 whe running instance DEVT1 and break in testdev2 DEVT2 is running.
Current database version is 11.2.0.1.0... I want to update, or apply the patches 11.2.0.2.0 scheme.
I want to do the upgrade out of Place (i.e. create new oracle home and install oracle)
I successufully standalone update DB (No. CARS) but I'm not having experience in the CCR.
Can you please guide me, or send me the link of the document that I follow to upgrade database RAC 11.2.0.1 to 11.2.0.2.0
See you soon.MOS Doc-things to consider before moving to 11.2.0.2 Grid Infrastructure/ASM [ID 1312225.1]
Steps to upgrade 11.2.0.1 RAC to 11.2.0.2
http://abbasocp.blogspot.in/2012/03/steps-to-upgrade-11201-RAC-to-11202.html
http://askdba.org/weblog/2010/10/steps-to-upgrade-11201-RAC-to-11202/ -
Everything by applying the patch Patch 18345006 as explained in Doc 1981206.1 , in the phase to apply it, I get the error
AutoPatch error:
You must be in Maintenance Mode to apply the patches.
You can use the AD Administration utility to set the Maintenance Mode.
I'm on Oracle EBS 12.2.4, Windows 2008 R2 x 64, 2 appl_tops not shared and the error occurs on the primart node.
How I applied the patch
source, run fs
adoption phase = apply patches = 18345006 = no allnodes
The issue was that my tns ifile was entered incorrectly for _PATCH entered tns. After having corrected the phase to APPLY fine.
Apparently, the maintenance mode error is just a smoke screen
-
With the help of adctrl while applying the patch ORS.
Hello
I installed the system of e-business suite R12 (12.0.4) on multi node. I now want to upgrade to 12.0.6. I would like to know if I can use adctrl to start several machine workers to reduce the time to patch upgrade. If so how can I start the worker to another machine?
Thank you
PrasadPrasad,
You have shared applications level filesystem implemented? If Yes, you can use "Distributed AD".
Note: 225165.1 - patching best practices and reduce downtime
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=225165.1If it is a conventional installation of several node, then I think you have to wait for the patch finish on the first node before running it on one or more other nodes.
Kind regards
Hussein -
Reporter mode physical log shipping standby when you apply the patch
I apply a (Group of hotfixes) processor for a dataguard primary and physical shall help Doc-ID 278641.1 . I need to temporarily stop archivelog shipment from primary to standby. The documentation gives this example of order:
ALTER system set log_archive_dest_state_X = reporter brought = the two sid ='* '
Where X is the number of destination used for shipment of recovery for the backup site.
So, what is the X? In online research, the answer is almost always Log_archive_dest_state_2. Questioning primary school, 2 is idle and waiting seems to be on 1, so I think I use 1. Which should I use?
On the primary:
Select the State, nom_dest, DESTINATION of v$ archive_dest where status = "VALID";
VALID
LOG_ARCHIVE_DEST_1
prod1s
VALID
LOG_ARCHIVE_DEST_10
USE_DB_RECOVERY_FILE_DEST
view the log_archive_dest_1 setting;
Log_archive_dest_1 SERVICE string VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE) prod1s = LGW R SYNC AFFIRM DB_UNIQUE_NAME = prod1s
LOG_ARCHIVE_DEST_10 string LOCATION = USE_DB_RECOVERY_FILE_DEST REQUIRED
view the log_archive_dest_state setting
VALUE OF TYPE NAME
------------------------------------ ---- ------------------------------
log_archive_dest_state_1 ENABLE stri
NG
log_archive_dest_state_10 ENABLE stri
NG
LOG_ARCHIVE_DEST_STATE_2 ENABLE stri
NG
activate log_archive_dest_state_3 stri
NG
activate log_archive_dest_state_4 stri
NG
activate log_archive_dest_state_5 stri
NG
activate log_archive_dest_state_6 stri
NG
activate log_archive_dest_state_7 stri
NG
activate log_archive_dest_state_8 stri
NG
activate log_archive_dest_state_9 stri
NG
On the physics of the day before:
Select the State, nom_dest, DESTINATION of v$ archive_dest where status = "VALID";
VALID
LOG_ARCHIVE_DEST_2
prod1
VALID
LOG_ARCHIVE_DEST_10
USE_DB_RECOVERY_FILE_DEST
VALID
STANDBY_ARCHIVE_DEST
USE_DB_RECOVERY_FILE_DEST
view the log_archive_dest_ setting
LOG_ARCHIVE_DEST_10 string LOCATION = USE_DB_RECOVERY_FILE_DEST REQUIRED
SERVICE string LOG_ARCHIVE_DEST_2 = VALID_FOR (ONLINE_LOGFILES, PRIMARY_ROLE) = prod1 LGWR
SYNC AFFIRM DB_UNIQUE_NAME = prod1
view the log_archive_dest_state setting
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
log_archive_dest_state_1 string DAVID
log_archive_dest_state_10 string ENABLE
allow the chain of LOG_ARCHIVE_DEST_STATE_2
allow the chain of log_archive_dest_state_3
allow the chain of log_archive_dest_state_4
allow the chain of log_archive_dest_state_5
allow the chain of log_archive_dest_state_6
allow the chain of log_archive_dest_state_7
allow the chain of log_archive_dest_state_8
allow the chain of log_archive_dest_state_9
DataGuard with physical standby
DB to: 10.2.0.4.0
No RAC, ASM or DG broker
Published by: JJ on May 2, 2012 10:05
Published by: JJ on May 2, 2012 10:05Hello;
You want this
ALTER system set log_archive_dest_state_2 = reporter; (you need to do to your log_archive_dest_state_n) DEST ID that apply to your system (looks like 2 also)
I'll post my full how patch is here a moment.
0. Disable log shipping from the Primary 1. Shutdown Standby 2. Install patch on Standby software only 3. Startup Standby in recovery mode (do NOT run any SQL at the standby) 4. Shutdown Primary 5. Install patch on Primary 6. Run SQL on Primary 7. Re-enable log shipping 8. Monitor the redo apply from Primary to Standby --- this will also upgrade the Standby See Oracle support article : How do you apply a Patchset,PSU or CPU in a Data Guard Physical Standby configuration [ID 278641.1]
Please consider old questions of closing some of you.
Best regards
mseberg
Published by: mseberg on May 2, 2012 09:16
-
The process that you follow to apply the patches.
I know that you guys wouldn't non-technical questions.
I was asked to create a document that describes the patches apply the entire process (gettinng approval of managers/users) for our RDBMS Oracle (10 g 2) final to actually apply the correction
In a production environment, when a DBA wants to apply a hotfix released by Oracle as PSU, CPU what the process follow the guy. What is the approval process we need to follow?Approval process that we follow is:
1 perform a upgrade of test with a replica of the production environment, test the application and make sure nothing don't breeze - this is the longest stage depending on the complexity of the application
2. Note the time taken by the process of upgrade, and post-upgrade above and discuss with the approval authority of necessary downtime
3. Once approved, inform end users (if possible) on the scheduled service break and the estimated downtime and still remember once a few hours before the actual upgrade processIf there is one bug fix to apply what needs a time out, some of the above steps are ignored - if this bug fix is essential from the point of view of functional and commercial.
-
Update failed. The update could not be installed (patch applies failed). He seems to want to upgrade 7.0.1 to 8. But when I click on the link, it does not offer updates, just all a band/reinstall! Where is the page of updates? Help?
You can try the alternative and easier way by downloading here
-
I tried several times to upgrade to Windows 7 Windows Vista Home Premium. It goes through all the steps, but at the last stage, at 62 he gets stuck, then stops, restarts and said then the upgrade has failed and that Windows Vista will be restored.
I found several sites that give a link to a Microsoft Fix It tool that should take care of this problem. I downloaded this patch Fix It, but the upgrade is still stuck at 62%. What can I do on this please?If possible, try to do a restore of Windows Vista and try the following:
1 disable any security software before you attempt to upgrade or do a clean install.
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.
Windows 7 Upgrade Advisor:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7 try the upgrade againAndre Da Costa http://adacosta.spaces.live.com http://www.activewin.com
-
Suite error encountered when the adstats.sql script runs along the sys user after the start of the database with the option limit:
SQL > @/ backup/adstats.sql;
Connected.
--------------------------------------------------
-adstats.sql started 13 / 09 / 2010 21:44:26 -
Checking the version of DB and collection of statistics...
declare
*
ERROR on line 1:
ORA-12801: error reported in the parallel query P002 Server
ORA-25153: Temporary Tablespace is empty
ORA-06512: at "SYS." DBMS_STATS", line 13591
ORA-06512: at "SYS." DBMS_STATS", line 13937
ORA-06512: at "SYS." DBMS_STATS", line 14015
ORA-06512: at "SYS." DBMS_STATS", line 13974
ORA-06512: at line 2
ORA-06512: at line 33 level
Can anyone help?
Thanks in advance,
UmairHello
I just used the TEMP for example. You should review your own storage space and adjust instruction.
You can change the temporary tablespace default:
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE temp1;
Herald tiomela
http://htendam.WordPress.com -
I use an old Dell XP Home Edition with SP2 preinstalled. 2 days ago at home, this laptop recognized and connected my network home wireless (802. 11 g Linksys). Today, at work, while sitting next to a wireless router, nothing (Mac Airport Extreme). I use a Belkin Wireless card. I'm not sure of the model of wireless card. Laptop is older and I am afraid to remove the card, but I will if necessary. Belkin Tech offers a WPA Librarians dwnld password to update my XP Op sys. She said that this update would allow my Sys OP to recognize an encrypted router WPA-2, which is how my work router is encrypted.
HI Captben,
The patch file the Belkin tech was referring to can be found here.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Fix installation problem: "the update does not apply to your system.
Greetings and thanks for reading.
Currently, I am trying to fix a problem of high performance mouse. During the game, the mouse staggers moving (or 'looking', through the mouse) left or right . I tried two different mouse and the problem persists. The mice and their software, both work fine when connected to an XP system.
By raising the solution, I found this support page that seems to match symptoms more than all other pages (with the solutions, I have already tried) I found: http://support.microsoft.com/default.aspx/kb/932653/en-us?p=1
The page suggests that a service pack must be installed (already done) and otherwise, to try a fix .
I got the patch in question, but when trying to apply the patch I am presented with an error message:
"The update does not apply to your system."
I understand that this question would happen if I had chosen the bits bad operating system (I chose x 86 for my 32-bit system, rather than the x 64 bit), but I chose the right bit system.
I wonder how do I overcome this problem during the installation of the hotfix.
I want to emphasize: I updated all drivers for the system (I had to shell out money for a driver update program because you are looking for that many drivers manually is virtually impossible), including the specific software for the mouse, the firmware of the mouse... None of them solved the problem. This fix may be my only remaining option to fix this mouse and I am unable to continue without help.
Kind regards
Lukemousesupport12345,
Please post with the information requested here: what to post in the Windows Update forumExplain when you experience the problem. It is only in the games? If so, is it all games or only some of them?
Clean boot your PC then test the mouse and see if the problem persists.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
TouchSmart HP Envy 14 - laptop occasionally starts with black screen
Hello and thank you for taking the time to look at my problem. My laptop is a HP Envy Touchsmart 14 8.1 Windows running. The product name is HP ENVY 14 Sleekbook TS and the number is E0M45UA # ABL
My problem is that my computer occasionally starts with a blackscreen with my mouse in the Center. I can move the mouse but it will return to the Center after a few seconds. I can't seem to do anything but hold the power button and shut down my computer. After that I open it again, can I use my normal computer. I recently did an update of the BIOS of my computer and I don't know if that is causing the problem. How can I solve this problem?
Hi Shibein:
Thank you for your inquiry. You can run the HP Support Assistant click here to help solve the problems and search for updates. You can also run the ' HP PC Hardware Diagnostics UEFI" click here." "I am also sending documentation on " Touchpad, keyboard, or a mouse ",click here, and ' computer will start (Windows 8)"click here. If none of this has solved the problem, you can try to restore the bios updated"Bios restore" TouchSmart HP ENVY 14-k110nr Ultrabook support" click here, or restore your computer to a date when it was working fine. '" Here is a link to 'use the Recovery Manager to restore the software and drivers (Windows 8)'click here. If you need help can you give us the exact model on HP Envy Touchsmart 14 you have. "How can I find my model number or product number?" click here.
-
Somehow lost the toolbar that has the page back arrow and refresh and stop icons. How can I replace those and remove a toolbar that starts with the MOST VISITED and lists several SUGGESTED SITES.
Hello kittyheckel, please see the Navigation buttons such as back, home, bookmarks and recharge are missing. You'll want to disable the bookmarks toolbar and enable the navigation toolbar.
Maybe you are looking for
-
How to add black bars to a screen play?
I use a Windows 7 15-inch labtop. When I was playing a game, he had black bars on the sides (which I liked). When I changed the color to 32 bit and 16 bit, the game went in full screen When I changed it to 32 bit, but it still shows the game in full
-
LAN printer prints not - need to remove and add another printer to obtain a paper copy. Intermittent problem.
-
Is it possible to put a server on the DMZ SQL
Hi all He would ask about the deployment of PIX. Is it possible to put a server on DMZ SQL (or one of 5 exclusion inside the interface interfaces) and simply define a NAT to allow inside the user access to the DMZ? Also without allowing the outside u
-
What to do when dell studio one 1909 screen is not calibrated
I have effectively had to completely reinstall windows 7 on my computer due to a problem with the system and when I reinstalled all the software I found that when I start the software system touch will work on the login screen but once the computer i
-
Jabber - creating an AD authentication account
It is a very simple question for those of you who have already implemented, but I can't find an answer defenetive in the user guides. Currently, I run infrustructure TMS-VCS-Jabber with accounts created manually on the MSDS. There is a desire to move