How to "approve this ipad."
software last updated 31/03/16 now im getting message to "APPROVE THIS IPAD' QUESTION what should I do to remedy this? Please
You must approve the device for use of Keychain
http://www.idownloadblog.com/2013/11/01/how-to-set-up-icloud-Keychain-iPhone-IPA d - mac /.
This could help as well.
Frequently asked questions about iCloud Keychain - Apple Support
Tags: iPad
Similar Questions
-
My iPad detects inactivity while I'm listening to a story. Then he slips into the mode "sleep" and interrupts the story. Any suggestions on how to avoid this?
Setting to never by using the auto-lock settings application.
Settings > general > auto lock > never
-
I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly. It never happened until this update. How to fix this problem?
Hello kellyfromrexford,
I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s. To determine what application or process affect the life of your battery, take a look at the information in these resources:
On the use of the battery on your iPhone, iPad and iPod touch
Maximize the life of the battery and battery life
Take care.
-
How to clean my iPad to have more space for the future. I don't know how to clean?
Use this iPad for five years.
I would like to clean.
Any help!
Brij
What follows has a few recommendations: http://www.macworld.co.uk/how-to/iphone/19-tips-make-space-on-iphone-how-clear-s pace-on-iphone-3524712 /
-
How cancel a monthly fee for storage space I need is no longer? Does anyone know how to do this?
You can change the storage volume by selecting a new plan directly from your iPhone, iPad, iPod, Mac or PC (for example, a plan of 5 GB to replace a 200 GB plan). The downgrade will take effect after the end of your monthly or annual subscription in progress.
iOS
- If you use the iOS 8 or laters, go to settings > iCloud > storage. If you are using an older version of iOS, go to settings > iCloud > storage and backup.
- Click Change storage Plan.
- Press Downgrade Options and enter your Apple ID.
- Choose a different plan to use when the expiration of your current storage plan.
- Tap done.
OS X- Choose the Apple menu > System Preferences, and then click iCloud.
- Click on manage in the lower corner on the right.
- In the upper right corner, click Change storage Plan.
- Click Options to Downgrade.
- Enter your Apple ID password, then click on manage.
- Choose a different plan to use when the expiration of your current storage plan.
- Click done.
-
No dialog "approve this computer."
Since the 10 update on my 5s iPhone iOS, I have the opposite problem of the loop of 'trust' that many have, in my case, whenever I want to import photos in the Photos app, it says, please press the dialog box "approve this computer" on the iPhone, but there is no dialog box. Without it, I can't unlock the phone, but then I don't have the ability to remove photos when importing...
Greetings jsegel,
Thank you for using communities of Apple Support.
I understand that after updating to iOS 10, no longer you receive the alert of confidence on your iPhone when it connects to your computer. I know that it is an important alert, because it allows you to import photos from your iPhone to your computer. I have something I want you to try.
Please see about the alert "to trust this computer" on your iPhone, iPad or iPod touch, more precisely, this section:
Get help
If you type Trust or don't trust, but iOS do not accept your answer, or if the alert of the trust does not appear, follow these steps. Try again after each:
- On your computer, especially with 10 Windows, make sure you have the latest version of iTunes.
- Disconnect, then reconnect your iOS device.
- Restart your iOS device and your computer.
- Reset the settings for your confidence.
- On your iPhone, iPad or iPod touch, go to settings > general > reset > reset Network Settings.*
For more information, contact Apple Support.
See you soon.
-
fingerprint sensor does not work for my iphone 16 6 GB pls help how to solve this problem?
I have iPhone 6 grey 16 GB of model space suddenly my fingerprint sensor no longer works.
When I try to set touch id always displays "failed please go back and try again".
Please guide how to solve this problem.
The warranty expired 3 months ago
See this support document to help solving the problems of contact ID. If all else fails, then make an appointment at the Genius Bar from the Apple Store supplier or Service Center authorized Apple closest to have the material examined. They will explain your options. Use touch on iPhone and iPad - Apple Support ID
-
How can I return Ipad lost the Original owner
How can I return Ipad lost to the Original owner. I found this in a restaurant and he didn't. is it possible to give that ipad
Of course, follow this:
Report a lost or stolen - Apple Support Apple product
Please send back
EDIT: of course, you can leave in the police station the nearest and the report as lost, place, time, etc. or to personnel in the site you found.
-
I did a reset on my iPad 2 and now it has an error message when I connect to my computer to access the backup. bed the error message, this iPad cannot be used because it requires a newer version of iTunes. How to upgrade the version of the ipad?
Take a look at the article, download the latest version of iTunes - Apple Support
-
Is it possible to transfer videos from the iPod from someone else on my iPhone? How to achieve this?
Depends on the model of iPod exactly.
If the iPod is supported you can try using AirDrop: How to use with your iPhone, iPad or iPod touch - Apple Support AirDrop
If this is not the case, there are applications in the App Store that will allow you to send files, including videos taken with the iPod and who reside in the film to other devices.
https://iTunes.Apple.com/us/app/photo-transfer-app-easily/id365152940?Mt=8
Photo transfer app allows you to quickly copy pictures and videos from your iPhone, iPad, Mac or PC using your local wifi network.
You can't send videos that are stored by default Apple video App.
-
How to activate my ipad ios 90.3 pre-installation please help me
I need help to activate my ipad before you install ios 9.3 I have try all the way, but it didn t work
I need help to activate
It depends on what state you are in. Do you need to backup you ipad?
My ipad before you install ios 9.3 I have try all the way, but it didn t work
What do you have. Step by step.
------------------------------
Re-boot ipad.
Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.
https://support.Apple.com/en-us/HT201559
Force power down if above give it trouble you.
At the same time hold the sleep/wake button and the Home button. Ten seconds or more. Keep until the Apple logo appears.
more information on the re-start:
http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm
This these tips from MichelPM to improve performance:
https://discussions.Apple.com/message/29504169#29504169
https://discussions.Apple.com/message/29504311#29504311
Restore factory settings by loading the latest version of the ios that will support your machine:
(1) make a full backup of your device if necessary. Is two times better - cloud and computer.
https://support.Apple.com/en-us/HT203977
(2) three methods of restoration of your ipad. [simple as abc]
2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."
http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US
2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:
http://support.Apple.com/en-us/HT201263
3.c) as a last resort, you might consider DFU (Device Firmware Update). This could void your warranty.
-
How do my mini iPad 3 factory reset if I can't go to the settings page?
How do my mini iPad 3 factory reset if I can't go to the settings page? The screen of my password doesn't let me in the iPad.
See if this helps: https://support.apple.com/en-us/HT204306
-
IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.
How to solve this problem? Is there someone who has the same problem?
Howdy,
Thank you for using communities Support from Apple.
I see you try to get your iPhone to interface with the stereo in your car via Bluetooth. For setting this up, please follow the steps below.
If you use Bluetooth
- Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
- On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
- Restart your iOS device.
- On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
- Update your iOS device.
- Install the updates to the firmware of your car radio.
- If you still not connect, contact Apple technical support.
Help to connect your iPhone, iPad or iPod touch with your car radio
See you soon.
-
Recently, I replaced my NETGEAR wired router with a NETGEAR WNDR3300 Wireless Gateway. While I am able to share internet access both wired and wireless, on my PC I have shared my printer and several directories. My wife's PC does not show my PC in the network, but if I ping my PC against hers, it solves the IP address, but the ping times out in vain. This network allows to work with the original router. I show PC my wife on the network on my PC. Since my PC can not be seen on his PC, I can't add the printer shared on his PC. How to solve this?
Configure the firewall on each computer to trust the local network and allow the sharing of files and printer.
More than one firewall running is likely to cause problems. Select McAfee or Windows Firewall and disable it.
I suspect that McAfee needs to be configured to approve the new router network. I don't know what version of what McAfee product, you have, but here's how to do it on the program McAfee Security Center provided by Comcast:
1 double-click on the Red M in the system tray.
2. click on Internet & network .
3. click on Configure .
4. by firewall protection is enabled , click Advanced .
5. click on networks .
6. If your router network does not trust , click Network, click on edit and select Trusted then in the menu.You can also get help in forums Community of McAfee .
-
I can not connect on DPS App Builder. This error occurs: ERROR this account does not have permission to access the App generator. Learn more about how to fix this.
Then you need to either:
(1) sign up for cloud creative then you can build a simple edition approx. attention however: this approach will no longer valid as of May 1, when we withdraw support for a unique creative cloud and unique edition apps are only on devices iPad.
(2) sign up for a full license of DPS. You can request information on prices using Adobe | Request for consultation.
Neil
Maybe you are looking for
-
HP Presario CQ58-100SY: no network adapter, Windows 10
Unfortunately, it is not possible to use a wired on HP Presario CQ58-100SY, network connection because there is only a visible and usable under Windows wireless adapter. I tried to install a driver located on the page for HP Presario CQ58-100SY, but
-
Cloning of an external drive for Time Machine
If I want to create a clone of my HD bootable, can I use an existing external drive that is used for the TM? Or would I need to create a partition in the drive and the clone to this partition? Or, finally, if you clone a drive with SuperDuper! or CCC
-
Dear friends, I need algorithm / VI to check a table that contains items and loop start tags (text) (While and For) and (for End) and End While loop end tags. Loops can be nested to any level and can be mixed (While loops inside loops and vice versa)
-
OfficeJet Pro 8610: Failure to scan in Officejet Pro8610
When I try to use the scanner I get a meassage saying "Sanner failure: unable to scan, copy or send a fax. The unit is connected to a wifi network and I can print fine from my computer or smart phone, but no ability to analyze, it worked without prob
-
Is this a real Windows/Microsoft Update or an attempt of hacker to access information?