How to cancel a license key after my computer has been stolen?

My computer was stolen along with my license key active for adobe acrobat XI.

Can you explain how to cancel this activation key to make it available on my new computer?

Thank you very much

Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations

If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server

Tags: Adobe

Similar Questions

  • instructions on how to get your photos back after your computer has been deleted and the

    my computer has been deleted and my photos from my photo file. so I wonder how I can get all my photos if I can at all... my computer was giving me problems and saying that the hard drive has been mess up so I went back and restored my programs and it restored everything but my photos and other files, that I would just get my photos.

    How exactly do you run restore?

    If you have used a disk recovery or a recovery Partition...
    to reinstall your system as it was when you first
    bought it... your personal files may be missing
    unless you do backups on an external support.

    There are programs of software designed to recover the
    deleted files. The following freeware is an example...
    a Google search will find more.

    If there is no file on your hard drive with
    not been crushed... There is a little chance that
    You may be able to recover some of them.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Recuva - file recovery
    http://www.Recuva.com/

    Introduction of Recuva (tutorials)
    http://docs.Piriform.com/Recuva/introducing-Recuva

    The following article can be also worth a visit:

    How to recover files deleted with free software
    http://Lifehacker.com/393084/how-to-recover-deleted-files-with-free-software

    Good luck.

  • How do to get the documents after the computer has been infected by a virus and wiped

    Hello

    My laptop works most completely and there was a humming noise whenever I tried to start. I learned that the laptop was corrupt. I was informed by the customer service to clean the laptop. In doing so, all parameters resumed those available at the time of the purchase in 2008.

    How can I recover all my documents, pictures, etc.?  I take the laptop to a computer technician to help with this.

    Can also advise you how to make a backup of all items stored on my laptop please.

    Kind regards

    J.

    Wiping the phone clean and restore to factory condition as advised by "customer service" (that may be), you actually deleted all the files that were on the computer. Recovery, even by a specialized at great expense data recovery company will be at best fragmentary.

    I'm moving your question to the forum space Windows for system repair and recovery, where it is possible that you may receive some additional tips, but I think that you can simply cut your losses at this point. If there is a hardware problem that caused the initial symptoms, it is likely that you will face more questions and data loss unless you get the hardware repaired/replaced.

    -steve

  • After that computer has been idle, error installation about DriverCure

    Get the message box on my screen after that computer remained inactive during the night of DriverCure saying Setup error. I was not able to locate to uninstall / reinstall. I don't remember always to help or even try to load this product. How can I get rid of this?

    If you go to start and type msconfig. Then go to the tab startup look to see if you see a program called DriverCure here. If so, then uncheck the box and restart your computer to see if you get the Setup error.

    Before going any further, do a manual system restore point.
    Right-click on the computer icon in the desktop, then choose Properties
    In the left pane, click System Protection
    Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    In the System Protection dialog box, type a description, and then click on create.

    If you find DriverCure, then look at the location and copy the path. It would be something like: HKeyLocalMachine\Software\Microsoft\CurrentVersion\Run
    Then go to start, type regedit. Then highlight the path you have copied, if drivercure present in the key, and then delete it.

    Then reboot and see if you still see the same error install DriverCure.

    Please answer back with an update.

    Sincerely,.

    Marilyn

  • If my product key of windows 7 has been stolen

    What I have to do, if my Windows 7 product key been stolen?
    If I blocked this key, then the window of my own system will be expired?

    How Windows was purchased?  What kind of a system?  There is no need (or way) to get any blockage.  If you are really worried about it, I call Microsoft and ask them directly, you will get better information.
     
    Use mechanisms to report on this page:
     
     
    and/or:
     
    Read the facts of the case:
     
     
    and consider the assignment in one of the real-forums, they will have more specific information on what could happen if your key has been copied by a person - but I wouldn't go off the deep end - stay cool.
     
     
    "farrukh.shami" wrote in message News: 718bd022-948a-46b7-b762-21c299872b95...

    What I have to do, if my Windows 7 product key been stolen?
    If I blocked this key, then the window of my own system will be expired?

    Bill Sanderson

  • Hello, my computer has been stolen, and now I bought a new.  I can't activate my license in Design on the new computer.  I don't know how deacivate.

    My computer was stolen I don't know how to disable and re-enable my driver's license.

    The email address I used when buying the license has changed as well.

    Could you please try another web browser.

  • How to recover programs lost after the computer has been repaired?

    Original title: ACER laptop help

    I recently had some work on my laptop ACER Aspire 5515 and the guy who worked on it took a bunch of programs out of my computer to help with the repair.  I don't know what all he took off, but I want to recharge my desktop computer with all of the programs that came with it when I bought it.  I do not know a program I want to come back is the one where I can play a DVD.  I can play is no longer a.  The initial problem was that my mouse arrow was frozen on the screen and would not move.  Any help will be greatly appreciated.

    Hello

    Check with the Acer support because they would have provided additional programs that came in the
    the factory computer. You can beed to buy the original installation so support these programs
    are provided in this topic. This disk should be pretty cheap since your already own Windows.

    Acer - USA - Service and Support - drivers
    http://us.Acer.com/AC/en/us/content/support

    Acer - worldwide
    http://www.Acer.com/worldwide/selection.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to re - install adobe creative suite 6 after my computer has been restarted

    I bought a copy of Adobe Creative Suite 6 (for Mac) of George Brown College in Toronto, Ontario, in 2014.

    Recently, my computer needs to be restarted, and now I have to re - install this program. I have a serial number and ID, but when I insert the disc, nothing happens, and I'm not able to enter this information.

    Can someone help me please in what concerns the reactivation of this software?

    Thank you very much.

    Shirley Lesch

    The following should be helpful.

    Download Adobe Creative Suite 6 applications

  • How to reconnect my remote site after that Dreamweaver has been charged on my computer?

    Once a system restore and Dream Weaver reloading I lost connection to my remote. All files the and remote are in place but the updated not validated at the remote site files? I don't want to reload all Web pages, because they are all on the server. Any way to re-login again? I tried to use manage sites to establish connections, but it does not work.


    Seems to me that you can download in the wrong place, or you can have a case mismatch in the name of the file.

    Make sure you have the root directory defined correctly in your FTP credentials and that you do not have this directory appear anywhere in your local files.

    For example, if the root directory of your site is "public_html" it must show in the field of root directory / Directory FTP host your site and NOT in the files of the window list. If it appeared also in your files window, you would be able to find your new pages at www.yoursite.com/public_html, which is obviously not wanted.

    Another question may miss the root of the server entirely, in this case, your files would be downloading to a top directory of your site on your server and totally inaccessible to the world online.

    A mismatch could take effect if you have index.html on the server, but the Index.html or INDEX. HTML on the spot. On Mac and Windows, all 3 of these file names are the same. They are not case-sensitive, but on the server, these are all 3 separate files. If this is the case of the navigation to the INDEX. HTML will give you the correct page online because it does not replace index.html.

    For this reason, it is always best to use lowercase names only when you are working online.

  • Webcam works only with Windows 7 after the computer has been cleaned.

    original title: Webcams

    I had to get my computer cleaned. After it was cleaned the windows installed person 7. I used Vista. I have a webcam built into my computer. I used to be able to use it to take photos and videos. Now, I can't. When I search for the webcam all I can find general information about it and its properties. Anyone know how I can get my webcam back up the way I used too?

    Hello

    Each manufacturer of system or camera maker provides their own software to control the camera so
    You should check with their support, their books online and ask in their forums (if any).

    You probably need to recharge the device drivers and camera control software (usually included
    with the drivers and installed at the same time).

    Login as an administrator.

    Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
    on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
    is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
    will update the driver stack.

    Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
    software (if not more recent get the same).

    Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

    Manually look at the sites of the manufacturer for drivers.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Then let windows updates on however prevent loading of drivers who are often older than the
    those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
    really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

  • After the computer has been infected with virus win32/cutwail.BA computer is very slow at startup

    My computer is infected with this wirus and my wirus program can not take it away from the computer, it make the computer very slow at the beginning, what should I do?

    Hi Andersjohansson,

    Method 1: To fix the performance issue, follow the steps mentioned in the link below

    Optimize the performance of Microsoft Windows Vista

    http://support.Microsoft.com/kb/959062

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance


    Method 2:
    if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3: Run Microsoft Security scanner (MSS) for any threat of remnant and try to correct

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: Infected files can be deleted from your computer; There is a chance of data loss.

  • Programs and software disappeared after my computer has been reformatted

    I recently had a PC virus on my desktop. I have and I was told that they had to reformat my PC. I have no idea of the land of what that meant except my original software and programs have DISAPPEARED. I do a lot of the event flyers and programs for Church functions and the program that was installed sucks. I can't for the life of understand me. I do my flyer for the Easter Services. The budget is tight!   So right now I can't afford to purchase the software and download on my PC. Are there programs that are free to use for my purpose without installing something on my PC; and it is FREE to use?  In any case help I would be very happy. Thank you.

    You need to reinstall your programs from the original media you receieved when you bought them. Reinstall your data from backups that you perform regularly.

    If you do not have the programs, you will have to buy them or Google for alternatives. Nobody here knows what to tell you, since we have no idea what you're talking about.

    If you do backups of data, you're out of luck.

  • Internet E8 freezes, usually after the computer has been idle for several hours or overnight

    When I run internet explorer fix - it tool, it gives me an error message - "has encountered a problem and cannot continue." What is one to do?

    Hello

    • What fixit did you run?

    If your Internet connection is very slow, you can follow this link.

    http://support.Microsoft.com/kb/926449

    You can also try this link.

    http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

    Note:

    Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  • Help for resettlement after that computer has been deleted.

    So the difficulties technical, my computer has been deleted, but I have some backup on an external hard drive, such as my Adobe Photoshop application and folder. I tried to open it but I got "error 16" so I followed the steps in Mac Os to solve this problem, I did. And it still does not work. If someone could help me with this since I was a photographer and need my CS6, I would be extremely grateful. Thank you.

    Transfer of programs will not work.  You must install using the installation files and your serial number.

    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

    You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • When I connect to the adobe page with my adobe id, I see onl "free membership". Its my right adobe id. I'm invited into a "working group" how to enter the license key I bought?

    When I connect to the adobe page with my adobe id, I see onl "free membership". Its my right adobe id. I'm invited into a "working group" how to enter the license key I bought?

    You accepted the invitation? If not please accept and share the results. Please try different browsers in case you are unable to accept it.

Maybe you are looking for

  • Satellite A200-13O: Vista Ultimate to basic installation help

    I need assistance to the full installation of Windows Vista Edition in my A200-13O.My current operating system is Windows Vista Basic and I want to upgrade to Windows Vista Ultimate.Based on the download section of driver I need the following drivers

  • ENVY4507: PAPER PHOTO NOT PICKED UP.

    My desire 4507 all-in-one printer works fine EXCEPT that it won't pick up and print on A4 240gsm photo glossy paper.  It works very well with paper 135gsm and, also, 4 "x 6" photo paper 170gsm weight. "   Regular printer paper is fine too, but it won

  • Square signal of function generator does not have any straight edges

    Hello, everyone! In my job, I need to see the charge and discharge of capasitor. I have to use a schema on the photo attached to power the capasitor, because I'm going to replace it with thermoresistor, requiring a certain exact current level. I use

  • Avoiding the turtle .svn folders to appear on pallets of Labview

    Hello I use TortoiseSVN for the version control and loading pallets of Labview, the .svn files are also loaded and they appear on the pallets. Is there a way to avoid this? Thanks in advance.

  • Problems with Sims 3, iTunes, Windows 7, and shortcuts :/

    Recently I installed the Sims 3 World Adventures... I never had the chance to play because he went all funny :/ In any case, I've uninstalled it, but all me shortcuts from desktop and my shortcuts on the start menu still had the logo of the Sims 3...