How to change files in a Linux vmdk

Similar Questions

• How to change IP host on Linux/RHEL for virutal host only network?

  I have a Windows XP guest running on RHEL 6.2 host.  I'm using VMware Workstation 8.0.3.  I have a network card only virtual host without DHCP.

  My guest must use 190.168.128.1 through 190.168.128.9 ip addresses.  However, this suspended with the 190.168.128.1 automatically assigned host address.  I can't find a way to change the address of the host.  I would like to 190.168.128.10.

  Strangely, my virtual network cards do not appear when I click on the network icon in the taskbar.

  Previously, I had this setup configuration up on top of a host Windows 7 and I could easily change this setting if the properties of the virtual network adapter.  In Windows, when a new virtual adapter is added, it appears in the list of available adpater.

  Thank you

  Marty

  but in my file/etc/vmware, I have only one file for vmnet8 and not 1 and 2.  They are present, if I run ifconfig.  Also, if it's important, I do not use DHCP on each host only virtual network.

  You will need to add the following in the file networking/etc/vmware/networking as root and then reboot the host.

  With the machine virtual shutdown, not suspended and VMware Workstation closed...

  In a Terminal:

  su -
  nano /etc/vmware/networking
  

  Add the following under code: answer Yes to VNET_1_VIRTUAL_ADAPTER

  answer VNET_1_VIRTUAL_ADAPTER_ADDR 190.168.128.10
  

  CTRL + O to save Ctrl + X to exit

  Restart the system (shutdown - r now) If you want to do it from the Terminal.

  There actually is a way to stop the VMware Network Services to then modify the file, and then restart services and without having to restart however I do not have orders in hand for a restart of the host must take care of it.

• Change file associations

  I need information about how to change file associations.

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  Simply ONE method to do so.

  The above is very good and covers programs by default file association.

  See you soon.

  Mick Murphy - Microsoft partner

• How to change the virtual IP addresses in 6.5.1 on the Linux host?

  I am running Workstation 6.5.1 on a 64-bit Linux host (Fedora 10).

  The application of "Virtual Network Editor" is distinguished by its equivalent in Windows.  It is quite reduced in functionality.

  What I need is a way to change the virtual IP addresses.  In the editor, I can only change the overall range of subnet (network address and the sous-masque).  It works very well.  However, I can not change the individual IP addresses in there.

  In particular, I need to change:

  .1 = the host itself

  .2 = services internal VMware (server proxy DNS, router, gateway, NAT, DHCP etc.)

  How can I assign these on Linux?  Pour.2, I saw the "nat.conf" file in the directory/etc/vmware, under the number of the device (in my case vmnet8) vmnet.   Pour.1, I've seen this in a number of places, the DHCP server, and others.  Where does get this information from VMware?  What I don't want is to have to change this IP address in many places, because it will become easy to get out of sync.

  If I just use "ifconfig" to change the IP address, it is an approach of brute force that works, but of course it will not survive a reboot.

  Traditional networks of the host Linux tools are unaware of the vmnet addresses.  Somewhere, they are configured with VMware, not the distribution of the host.  So, I wonder where it is.

  Thank you!

  Josh

  Josh,

  Here is what I do on my VMWare Wks 6.5.2:

  Files to edit:

  1 /etc/vmware/vmnetx/dhcpd/dhcpd.conf

  Change the following:

  (a) range

  (b) option domain-name-servers {10.10.10.254}

  (c) {10.10.10.254} option routers

  2 /etc/vmware/vmnetx/nat/nat.conf

  Change the following:

  (a) {10.10.10.254} ip - address of the NAT gateway.

  3 /etc/init.d/vmware script

  (a) check a function called vmwarestartvmnet()

  (b) after the/vmware-networks - the beginning of the line, add:

  ifconfig vmnetx xxx.xxx.xxx.xxx {ip host address we want to}-> vmnet1 ifconfig 10.10.10.253

  This works perfectly for me. The only thing is that, once you change these files, make sure that you get a copy of them. Otherwise after any update or configuration change who will be overwritten.

  I hope that VMWare will come with a better way to do that instead of hacking these files manually.

  HTH,

  -Daniel.

• How can I change the default applications (Linux)?

  I have a RealVideo server, and I want to use RealPlayer to open different types of content such as audio/x-pn-realaudio, and text / vnd.rn - windows

  For some types, I get a drop-down list that says "realplay (default)", but it isn't so it's Totem, which is crippled by RedHat, it won't play anything, except, perhaps, Ogg. I can choose the real realplay while browsing, which works but is tedious - my .mailcap file has all these types listed as using realplay is what I expect to be used.

  For a type, he immediately launches Totem, and I don't see that in the edit/preferences/applications list, so I can fix it.

  Come to think of it, he probably has got the Totem plugin installed. I do not know how to change which runs off completely

  Thank you.

  I discovered that the browser plugins wired totem of many types of content, regardless whether if the appropriate codecs are installed.
  I can't like you say disable the whole plugin, or it seems to disable content types individually using the plugin.disable_full_page_plugin_for_types configuration parameter in "subject: config" as shown
  http://kb.mozillazine.org/Opening_files_using_plugins, for example
  plugin.disable_full_page_plugin_for_types; Video/MPEG, video/x-ms-WMV

• How to change the location where the scan of the computer updates the file?

  I would like to know how to change the location where the scan updates the file.

  HI ROT2,.

  It depends what printer and the software you use?

  Normally, you will find a 'save to file Option save' like the screenshot below.

  

• How to change a file name in the Photos? (no title)

  I know how to change the title of a photo in the Photos.  But I do not see how you change a file name.  Can anyone help?

  Photos will not change an imported file.  The original master image file is preserved. You can't even change the file name.

  To change the name of the file, export the Photos photo: file > export, and then specify a different file name in the export Panel.

  Re-import the renamed picture, then delete the first version you imported.

• How to change untitle about writing about a measurement file

  How to change without title, untitle1... about writing about a file of measures. LVM

  REMOVE the convert Dynamic data.

  

• How to change download files where to go?

  My game downloads usually go in my download [Favorited] folder they will now one size full page and I can't access it.

  Hi, William,.

  How to change the location of file download in IE 9

  http://www.gHacks.NET/2011/02/13/how-to-change-the-file-download-location-in-Internet-Explorer-9/

• How to change the read-only, write protect status of files?

  Original title: change the State of the files.

  I have problems deleting files.  I need to know how to change the status of the files: e.g. "read-only, write protect, etc."

  Hi fbanks4,

  1. were you able to remove the files before?

  You can read the following article and try the steps to change the status of the read-only files:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to change a .mswmm file so I can upload it to Facebook?

  How to change a .mswmm file so I can upload it to Facebook?

  MSWMM files are only the project files that contain details of your film project. They are not convertible. You must first create/record/save the film. Under 'Tasks', you will see the option to create or save the actual movie on your computer.

• How to reverse change how open .dll files?

  How to reverse change how open .dll files? I changed accidentally, trying to open only ONE file, most of them to open with Microsoft Picture It! software and now some things do not load, and my USB ports are completely useless!  Help. How to reverse this mess? OR should I simply delete all these and download replacements? A lot of new files that I downloaded automatically changes in Pic! icons, once that they finish downloading... - and I cannot restore, because he says that nothing has changed.

  Thank you!

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest running the fix that is present in the link mentioned below and check if the problem is resolved.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2:

  If the problem started recently, so, I suggest you do a system restore and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST. How to change this default setting.

  When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST.  How to change this default setting.

  Hello combat

  
  Open Windows Explorer/Tools/Folder Options

  On the general tab, click the options you want.

  In the view tab, click the options you want.

  On the view tab, click apply to all folders.

  Click Yes, then OK
  
  .

• My files, folders and element names are colored which appear in blue, how to change them back to black?

  My files, folders and element names are colored which appear in blue, how to change them back to black?

  The names of files (text) for example appear blue, as if it were a hyper link, where normally they should be black. What can I do to change black?

  In general, folders with names of blue files appear in this way because the compression of files and folders is enabled for this file or folder.  To return only the names of files and folders back to the dark, disable compression of files and folders that show in blue now.  Right-click on the folder, select Properties, and then on the Advanced button and that is the option.

  writing in the new message: * e-mail address is removed from the privacy... *

  My files, folders and element names are colored which appear in blue, how to change them back to black?

  The names of files (text) for example appear blue, as if it were a hyper link, where normally they should be black. What can I do to change black?

• I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player. How to convert files in a file type supported?

  Original title: M2TS

  I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player.  How to convert files in a file type supported?

  Hello

  The files have already been burned on a DVD and therefore cannot be converted. However, you can download and install third-party codecs to play .m2ts files.

  Codecs: Frequently asked questions

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.