How to change power mode using powershell script?

Similar Questions

• How to change security issues using alternate email address

  How to change security issues using e-mail. That you send e-mail to?

  Forgotten security issues

  1. If you forgot the answers to your questions of security of Apple ID - Apple Support
  2. Apple ID - all about Apple ID security issues
  3. Contact Apple for assistance with the security of the Apple ID - Apple Support accounts
  4. Security issues

  If you don't have an e-mail address of relief already implemented, then you will need to call Apple (point 3) for repair.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to enable HTML access in the office pool by using PowerShell script?

  Hello

  I use to create pools of auto related clones using a script PowerShell/PowerCLI Office. The script provides all the parameters required for the Add-AutomaticLinkedClonePool cmdlet and there is a lot of it! Creating pools in this way allows me to save about 100 clicks per pool.

  Now I want to enable access HTML for each pool, but I can't seem to find the name of the parameter.

  I checked the properties of the object returned by Get-pool-pool_id w7mw620 and compared to other similar properties office pool where access HTML has been disabled. I coulnd't not see any differences in the property values, which seem to make a significant difference for the setting "enable access HTML '.

  There was a property named "calculatedValues", which was true for one and False for the other office pool. I don't know what is the meaning of this property. Help the cmdlet Add-AutomaticLinkedClonePool or AutomaticLinkedClone-set to list this property.

  So... How can I set the property to allow access HTML from a PowerCLI script?

  Hello, in response to my own question again...

  On the basis of the above VBScript example, I invented this PowerShell code snippet that does the work of activation / deactivation of HTML access to one or more funds pools, by adding or removing 'BLAST' to the allowed protocols. It's a beast of a code, and I think that this code can still be optimized/shortcut. It works for me. It allows the use of wildcards to select a number of pools of office to toggle HTML access to.

  To use it, just customize two variables constant to match your environment:

  $dn must maintain the name of the root of your ADAM database. I think that this name is the default, but I don't know about you.

  $domain must maintain the computer name or address IP and/or port number where the ADAM database is stored. You must also have sufficient permissions to connect if it is something else then "localhost".

  function Set-BCPoolHtmlAccess ([string]$Pool_id, [boolean]$HtmlAccess) {
  <#
      .SYNOPSIS
          enables or disables HTML Access to the given VMware View desktop pool
      .DESCRIPTION
          This function enable or disable HTML Access to a desktop pool, by modifying
          the "pae-ServerProtocolLevel" property of the associated object in the ADAM
          database via LDAP. This property is a multi-valued attribute contains a array
          of string, which designates
          by which protocol desktops can be accessed. It valid values are "PCOIP",
          "RDP" and "BLAST". Controlling the existance of the string "BLAST" determines
          if the pool is accessible through HTML Access. The parameter Pool_id determines
          which object is modified.
      .EXAMPLE
          Set-BCPoolHtmlAccess "W7ST620" $True
      .PARAMETER Pool_id
          the pool_id of the desktop pool of which to enable or disable HTML access. Wildcards are allowed!
      .PARAMETER HtmlAccess
          Boolean value to set the HTML Access to.
      .OUTPUT
          None
      .NOTES
          Written by Paul Wiegmans on 31-8-2014
          "pae-ServerProtocolLevel" is a multivalued attribute, which is a little difficult to
          write correctly to the object.
          http://www.selfadsi.org/write.htm
                  Google "powershell ldap multi value property"
          http://jdhitsolutions.com/blog/2011/12/updating-multi-valued-active-directory-properties-part-1/
  #>
      $dn = "DC=vdi,DC=vmware,DC=int"   # root OU of VMware View ADAM database (CUSTOMIZE ME)
      $domain = "LDAP://localhost:389/$dn"  # connect to the ADAM database (CUSTOMIZE ME) 
  
      $root = New-Object System.DirectoryServices.DirectoryEntry $domain
      $query = New-Object System.DirectoryServices.DirectorySearcher
      $query.searchroot = $root
      $query.filter = "(&(objectCategory=pae-DesktopApplication)(cn=$pool_id))"
      $pools = @($query.findall())
      $propname = "pae-ServerProtocolLevel"
  
      foreach ($pool in $pools) {    
  
          $poolobj = [ADSI]$pool.GetDirectoryEntry()
          $protocols = $poolobj.$propname
          $desiredprotocols = @()
          foreach ($protocol in $protocols) {
              if ($protocol -ne "BLAST") {
                  $desiredprotocols += $protocol  # save a list of all existing protocols
              }
          }  
  
          if ($HtmlAccess) {
              $desiredprotocols += "BLAST"
          }
          write-verbose ("Desktop pool " + $poolobj.name + " gets protocols: "+$desiredprotocols)
          $poolobj.$propname = $desiredprotocols
          #$poolobj.$propname = @("PCOIP","RDP","BLAST")  # to reset to normal values
          $poolobj.CommitChanges()
      }
  }
  
  $pool_id = "W7S*"                  # pool_id of pool to set protocols of
  Set-BCPoolHtmlAccess $pool_id $false
  Set-BCPoolHtmlAccess $pool_id $true
  

  Have fun

  Post edited by: Sikkepitje

• How to change the text after the script to the Calendar Wizard creates a calendar

  I mainly work with Photoshop, so I am new to the world of InDesign.  I put my options for the Calendar Wizard script, it goes through the motions, making the calendar and then shows my finished product.  The problem is that it lists the year alongside each month: may 2012 June 2012, etc, and I need to remove '2012' of each of them.  I know that the font styles updates the entire calendar when they are applied, so I hope that it works in a similar way.  I guess it is a very simple task if you are familiar with the program, haha!

  Thanks in advance for any help!

  It sounds more like you ask how to delete 2012 of several pages, and not how to change the script to not put 2012 in all first. If I'm wrong about this, you may want to ask on the Forum script.

  An easy way to remove 2012 is to use find/replace. If you are looking for 2012 and do not fill the field exchange, she will replace 2012 with nothing. In the Find/Replace window, there is a field that will allow you to search for the location of the cursor to the end of the current history, the history, the stories in the document or all open documents. If you set it to the Document, you can use the search button to find the first instance, and if you want to remove it, you can hit replace them, replace/find (what will change and find the next instance), or change everything. I would replace/find, in case you have 2012 on another part of the calendar that you want to keep. You can also have it search the text only when it has a particular paragraph or a character style and put in place the same or a different paragraph or character style. To do this, click in the boxes of Format change or find. To clear out them, hit the small icon of the Recycle Bin next to the field.

• At the point of the map, how to change the font used

  Hello

  I want to change the font used in the bubble in Mappoint. I don't talk about boxing of text or the text size, I just want to change the police and use "Microsoft sans Serif".

  Is this possible?

  How to do?

  I used Windows 7,

  Best regards

  You can ask in the following forum because they are more likely to have relevant experts:

  Highway, streets and Trips, MapPoint .

• How to change a procedure using sqlplus...

  command to change a procedure using sqlplus

  Hello

  Laughing says:
  command to change a procedure using sqlplus

  You cannot change a procedure in the way that you can, say, ALTER TABLE; all you can do is CREATE OR REPLACE PROCEDURE..., with the definition of the whole procedure.

  Do the actual editing in a text editor. Any editor will do. You can even use a word processor, if you think to save it as text only.

  If you don't have a copy of the procedure as it is, and then use dbms_metadata, or query a view of data as all_source dictionary to get a.

  In SQL * Plus, run the file that you have edited by saying:

  SQL>  @pathname\filename
  

• How to change Windows registry using JNI to 64-bit JVM?

  OK, so I used ICE_JNIRegistry.dll for editing the windows registry in my application. It works perfectly fine when running a 32-bit Java virtual machine, but I want to know if there is anyway to change the registry of windows to a 64-bit jvm. I, are a response to the google search, but couldn't find a solution. Someone knows how to do this with or without ICE_JNIRegistry.dll?

  847265 wrote:
  I want to know if there is anyway to change the registry of windows to a 64-bit jvm.

  I guess you could write a .vbs (VBScript) file and run it from your Java program. Some examples of using this approach to solve other problems.
  http://www.Java-forums.org/advanced-Java/40925-printing-Excel-document-without-opening.html#post189415
  http://www.coderanch.com/t/529390/Java/Java/find-Windows-special-folders

  In case you are not familiar with VBScript, there are a number of registry associated samples here:
  http://www.ActiveXperts.com/activmonitor/windowsmanagement/scripts/OperatingSystem/registry/#CRK.htm

  Browse all sections of the
  http://www.JavaWorld.com/JavaWorld/JW-12-2000/JW-1229-traps.html

  DB

• Browsing articles Appassure - found some useful powershell scripts

  Sometimes when I have a few minutes I decide to see what are the most recent KB articles for spare appassure.  Sometimes they have a few useful scripts, YMMV.

  Thought I would like to highlight these two scripts, because they produce some very nice reports/graphs which can be easily added to a central intranet or something that allows you to monitor the current state (or a State over a period of 'x' days.

  support.Software.Dell.com/.../147582

  How to generate an AppAssure At-A-Glance remote reports for large environments (several kernels, remotely)

  support.Software.Dell.com/.../147577

  How to generate reports of At-A-Glance AppAssure for small environments (core, local)

  Note that the article refers to a nonexistent article, he should (probably) see 147577

  Anyway, just thought I'd share with you as I suspect few of us regularly visit pages KB, they do not have some useful info.

  Note, as WES has stated in the past, they do not support powershell, if it means that these scripts will break with newer versions or not, I can't say, I hope that they will be

  Bravo for that. These generate a nice report which can warn us at least failures trends.

• How to change the fonts used to display the list of emails on the homepage?

  Looking at my Inbox or other e-mail folder, the font used to display the list of emails in folders - gives me a headache.

  How can I change this font? Is there an add-on? Something in their profile?

  Ideally, I would like to change the background color of white also. (Perhaps the color on this page where I ask the question. "It's easy to read, the font and the color!)

  I've been a programmer in a past life, so I'm tech abreast. I am new to use Thunderbird (I used FF for several years.)

  Thank you!!

  Yes, to change the font, you can use this addon:

  • Theme font & size changer

  Also, try to use themes:

  • https://addons.Mozilla.org/en-us/Thunderbird/themes/
  • https://addons.Mozilla.org/en-us/Thunderbird/complete-themes/

• How to change the color using JavaScript

  How you specify the color of a shape by using JavaScript to animate?  The code below does not work.  I'm not find documentation on how to work with JavaScript in Animate out snippets of code in box provided.

  this.redBox.style.color = "#00FF00";

  this.redBox.style.color = "rgb (155, 102, 102);

  The API chart in canvas mode is CreateJS. CreateJS is very well documented.

  EaselJS v0.8.2 API Documentation: Graphics

• How to access the modules using the script?

  Hi can someone help me how to link to the module using script if you have ideas to share with the me...

  Thanks in advance

  (There are two ways to load the modules, 1) ModuleLoader class component ModuleManager 2).

  The ModuleLoader component's mxml, so I will not provide an example.

  The ModuleManger class is for loading modules via actionscript.

  Here is a link to resources on the loading of modules as well as the code example.

  http://help.Adobe.com/en_US/Flex/using/WS2db454920e96a9e51e63e3d11c0bf64277-7ffd.html#WS2d b454920e96a9e51e63e3d11c0bf69084 - 7 d 20

  -Darrell

• How to change system.mode?

  Hello
  
  I use elements not bound in a form to indicate a label
  This label is validated in a POST REQUEST by a select statement
  
  Select the label
  in: BLOCK. UNBOUND_ITEM
  from my_table
  where the...
  
  but after receiving the request on the form I have this message when I want to leave the form:
  «do you want to save...» »
  
  So I want to set system.mode to normal and not CHANGED...
  
  Can you help me???
  
  I WORK under 9I DESIGNER
  
  @Rosagio

  What is the version of the form that you use?

  You change the value of the data in your form, I doubt that you can change the: SYSTEM. MODE. Make sure that you do not change the value of any item database.

  If you are populating an element not db after QUERY shaped 10 g and make this message, you can set the property ITEM_IS_VALID of the element to TRUE and you will not get the message "do you want his...» ».

  SET_ITEM_PROPERTY('your_item', ITEM_IS_VALID, PROPERTY_TRUE);
  

  Tony

• Re: NB10-A-110 PU143E - Win 8 installation - how to change the mode UEFI

  I have preinstalled 8 win and want to win 7, but I can't see where to change the UEFI bios.
  NB10-A-110 - PU143E

  Hello

  You must update the BIOS.
  Then the UEFI /CSM mode must be visible in the BIOS, and you should be able to change it.