How to change the USE_INDIRECT_BUFFERS parameter

Similar Questions

• How to change the PCTFREE parameter for an existing table

  How to change the PCTFREE parameter for an existing table?
  
  Guys can you help me please

  Hello

  Of course it is possible.
  In this case you would export the table from the database (using old style exp)
  Start the import with the index_file option to generate the table/index instructions
  Modify the file created and updated the PCTFREE and remove any that need to be performed (default, if I remember correctly, he comments on the statements of the Index)
  Run the file for the table and the index created
  After that start the import with the option "ignore = yes".

  Make sure that you export only this particular table using "tables =
  Also in importing the "ignore = yes" will also be important data that still exists.

  In my view, however, this is not what you want to do. It's more complex, sensitive failure and the table should be deleted, so users are affected unnecessarily long.

  Success!
  FJFranken

• How to change the parameter default slot 'Style layer'-'Stroke '?

  Whenever I use "Layer Style"-> "Stroke", the default value is always red for 'Color' and 3.0 for the 'size '.  I would like to change the size and the color by default, so that I don't have the change of these parameters each time that I use "Style of layer"-> "Stroke".  Anyone know how to change the default settings?  Thanks in advance.

  Preset animations are the way to go. I have a library of more than 200 that I created to speed to the top of my work. Learn how to create them and use them by typing "create a preset" in the search help field in the upper right corner of the AE and dig through the resources you will find. The first link will get you started: using After Effects | Animation and effects presets overview

• Satellite A210-109: how to change the color temperature of the display?

  I want to know how to change the color temperature of the screen of my laptop? Theres no option in the ATI catalyst and no toshiba utility, where I can change this? I have the latest installed toshiba display drivers.

  Hello

  you mean the gamma settings? I don't know if the ati drivers are able to do, but you can try the program "powerstrip" (www.download.com/PowerStrip/3000-2086_4-10395724.html), which can change the color and the parameter gamma for graphics cards.

  Just give it a try and you will get your favorite color settings. :)

  Welcome them

• How to change the application installed HARD disk?

  My PC following setting:

  C: is for Window XP OS

  D: is installed application

  because the disc is not enough space and need to buy a new SATA III HARD disk after formatting under drive Z:

  I copy everything in D: z: readers and I would exchange the disks for the following parameter:

  D: old drive will become Z: drive for backup

  Z: old disk will become D: drive for installed application, because many applications and installed adjustment use the D: drive for application, so I'd like to preserve the D: drive for application, but I get no idea on how to swap the disks.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  This article describes how to change the drive letters on drives:

  "How to change drive letter assignments in Windows XP"
    <>http://support.Microsoft.com/kb/307844 >

  HTH,
  JW

• How to change the Legacy USB Support on hp phoenix h9 - 1215t?

  I was wondering if anyone knows how to change the option of existing usb on the phoenix from HP support. I tried to find on the BIOS, but I had no chance.  I want to change it, is because I want to use my hardrive external without unplugging and pluggin it back everytime I turn on my computer.

  Hello

  I see that your particular PC is not active UEFI. You can check that the information provide in the BIOS.  Version 7 is not UEFI. If you start in the BIOS (tap button to power up the ESC) and then press F10 computer for installation.  Now, go to storage topics and then select Boot Order. You should be able to move the hard drive on it to the top of the list of Legacy devices and then save the settings.

  I saw on some latops legacy USB option as a separate selectable parameter.

• Change the INITRANS parameter to the existing blocks

  Version 11.2.0.2.0

  Hello guys, got little stuck to change the INITRANS parameter to a table partition. The table is partitioned by range.

  To change the INITRANS and PCTFREE for new block that will be generated, I can use the following statement.

  ALTER TABLE < table_name > PARTITION EDIT < nom_partition > INITRANS < value > < value > PCTFREE;   (but this change will apply only to newly created blocks and not the existing blocks).

  I try to change the existing blocks too, so when I read the thread on otn How do I change initrans in the partition table? he said to use the 'MOVE' clause, so I used the following statement.

  ALTER TABLE < table_name > FILM PARTITION < nom_partition > INITRANS < value > < value > PCTFREE; (they said that this measure will apply the change to exisiting blocks as well), but when I executed this statement I got the following error message.

  ORA-14020: this physical attribute may not be specified for the partition table.

  Can someone tell me where I'm wrong and I have to do correctly to apply the change initrans and pctfree to existing blocks of the table too?

  Thank you

  Cut-n-pasted from SQL * Plus - 11.2.0.4

  SQL > set comments on

  SQL > alter table pt_range move partition p400 initrans 20 pctfree 10;

  Modified table.

  Concerning

  Jonathan Lewis

• How to change the date of transition to the jpuery.nivo.slider.pack.js (Dreamweaver template)

  I have a slide show, and the time is 2 seconds.  I wish I had a slide or fade right from one slide to another.  How do I do that?  I am able to change the pause time, but may not know how to change the transition.  Here is the part of the code:

  1. a.fn.nivoSlider.defaults = {effect: 'fade', animSpeed:50, pauseTime:2e3, startSlide:0, directionNav:true, directionNavHide:true, controlNav:true, is controlNavThumbs:fal, controlNavThumbsFromRel:false, controlNavThumbsSearch: ".jpg", controlNavThumbsReplace: "_t humb.jpg", keyboardNav:true, pauseOnHover:true, manualAdvance:false, captionOpacity:.8, prevTex t:"Prev",nextText:"Next",randomStart:false,beforeChange:function() {}, event: function () {}, {slideshowEnd:function(){},lastSlide:function(){},afterLoad:function()}} "}

  I can change the pause time (value 2 seconds now), but I tried to change the animSpeed for: 1 and: 100, but no change.  I tried to change the effect: "default", "fade", and

  "sliceDownRight" and others in the code below, which is beyond the performed: 'fade' code I'm working with.

  if(d.Effect=="Random") {var i = new Array ("sliceDownRight", "sliceDownLeft", "sliceUpRight", "sliceUpLeft", "sliceUpDown", "sliceUp DownLeft", "fold", "fade", "boxRandom", "boxRain", "boxRainReverse", "boxRainGrow", "boxRainGrowR everse") }

  Can anyone help?

  Thank you

  Most widgets have a constructor that allows you to apply changes to the functioning of the widget.

  Here is the constructor for the Nivo Slider settings

  $('#slider').nivoSlider ({}

  effect: 'random', / / Specify defines as: "bend, bland, sliceDown.

  slices: 15, / / for the animations of the slice

  boxCols: 8, / / for the animations of the box

  boxRows: 4, / / for the animations of the box

  animSpeed: 500, / / speed of slide transition

  pauseTime: 3000, / / how long each slide will show

  startSlide: 0, / / Set from slides (index 0)

  directionNav: true, / / next & previous navigation

  controlNav: true, / / 1,2,3... Navigation

  controlNavThumbs: false, / / use tiles for a control Nav

  pauseOnHover: true, / / Stop animation while hovering

  manualAdvance: false, / / hand strength of transitions

  prevText: 'Prev', / / Prev directionNav text

  nextText: 'Next', / / Next directionNav text

  randomStart: false, / / Start on a slide at random

  Beforechange: function() {}, / / triggers before a transition between slides

  Event: function() {}, / / triggers a transition between slides

  slideshowEnd: function() {}, / / triggers after all slides should have been disclosed

  lastSlide: function() {}, / / when the last slide is indicated

  postcharge: function() {} / / triggers when the cursor is loaded

  });

  The effect parameter can be one of the following:

  • sliceDown
  • sliceDownLeft
  • sliceUp
  • sliceUpLeft
  • sliceUpDown
  • sliceUpDownLeft
  • fold
  • fade
  • random
  • slideInRight
  • slideInLeft
  • boxRandom
  • boxRain
  • boxRainReverse
  • boxRainGrow
  • boxRainGrowReverse

• After that I changed the Duplex parameter on NIC's Service console, I am not able to connect the ESX host

  Hi all

  Please help solve my problem.

  After that I changed the Duplex parameter on NIC's Service console, I am unable to connect the ESX host. How can I reset the 100 MB NETWORK card duplex. Can someone help me please.

  Concerning

  Vijay

  Hello

  As the bulb you have two problems that are not related.

  (1) duplex setting, your switch and NIC must match. If one is assigned to auto-negotiation, then the other must be set to auto-negotiation. Personally, I tend to let auto-negotiation unless there is an absolute reason to spend. If you then turn on the both sides of the interface, the switch port and esxcfg-NICS allows you to change the duplex, etc.

  (2) passwords for root are not related to the network unless you have also run esxcfg-auth authentication remote.  The only time I saw what you have here is when the system is configured to try to authenticate remote and not locally.

  The two problems are fixable by booting into single-user mode, set the duplex and reset the password.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• How to change the SGA and PGA in 10g r2 RAC

  Hello
  
  How to change the SGA and PGA in 10g r2 RAC, its Linux.

  Hello

  Here's the way I followed to change the SGA and PGA in CARS.
  --------------------------------------------------------------------------------
  Action plan to change the parameter memory in the environment(5/21/2010) of production

  Note:
  =====
  Practice must be done in the DEV/TST environment before going to Production.
  Although the procedure can be applied in the testing environment the evolution of values
  used in the test environment should be amended since number of RAM are not the
  even between the production and test servers.

  1 changes to these two parameters in one of
  the prod instance, e.g. PROD1
  ====================================================
  Connect as sysdba on sqlplus
  --------------------------

  Change:

  ALTER system set sga_target = 28G scope = spfile sid ='* ';

  Change:

  ALTER system set pga_aggregate_target = 4G scope = spfile sid ='* ';

  SQL > alter system set pga_aggregate_target = 4G scope = both;
  SQL > show parameter pga_aggregate_target;
  -should see the number altered on both instances

  Change:

  SQL > alter system set sga_max_size = 28G scope = spfile sid ='* ';

  SQL > alter system set sga_max_size = 28G scope = spfile;

  SQL > alter system set sga_target = 28G scope = spfile;

  3 stop PROD database (two instances must stop)

  $> srvctl stop database d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  4. establish the PROD database (two Forum should be high)

  $> srvctl START database-d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  connection in both cases as sysdba to check
  --------------------------------------------

  SQL > show parameter pga_aggregate_target
            
  SQL > show parameter sga_max_size
  -should see the number of change always there in both cases
  -According to step 1

  -After confirmation above two parameters are changed on both instances.
  -then make the syntax below in a case

  (5) check that everything is ok

• How to set the NLS_COMP parameter to the instance level?

  In Oracle 11 g, we can change the NLS_COMP and NLS_SORT setting at the session level. But how to put at the instance level. It has been said (see http://www.orafaq.com/node/91) which can be donw with the operating system environment variables. I did on Linux

  export NLS_COMP=linguistic
  export NLS_SORT=BINARY_CI

  Then check with

  select * from NLS_INSTANCE_PARAMETERS where parameter in ('NLS_SORT','NLS_COMP');
  PARAMETER                      VALUE
  ------------------------------ ----------------------------------------
  NLS_SORT
  NLS_COMP                       BINARY

  The parameter are undefined.
  
  ALTER instance does not work:

  ALTER SYSTEM SET NLS_COMP=ANSI; 
  ORA-02096: specified initialization parameter is not modifiable with this option

  How to configure the instance parameter?

  Try: -.

  ALTER SYSTEM SET NLS_COMP = ANSI scope = spfile;

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28320/initparams135.htm

• How to change the iPhone camera shutter sound 7

  How to change the iPhone camera shutter sound 7?

  Hello

  To adjust the volume of the sound of the camera shutter:

  • Use the settings ringer and alerts:
    • On iPhone 7 and iPhone 7 more, go to: settings > sounds and haptic.
    • (Other models, go to settings > sounds).
  • Or turn mute off / on using the switch on the side of your iPhone's ring/silent.
    • (The mute function is disabled in some countries).

• How to change the number of minutes for the exercise of the activity of the application

  How to change the number of minutes for the exercise of the activity of the application

  Hello

  It is not currently possible to change the goal of daily exercise.

  If you want to suggest that Apple consider adding this option, you can submit a request here:

  https://www.Apple.com/feedback/watch.html

• Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Greetings jenniferfrom46,

  From your post, I see that you are unable to make phone calls. I count on the ability to use my phone a lot to make calls, so I can understand your concern. I will be happy to provide you with some information for you.

  If you can not make or receive calls on your iPhone, this article goes on measures to take to help with the issue you are experiencing.

  Have a good!

• How to change the color of pre-rendered screen.

  My question is how to change the color of the page that is displayed before a site is fully charged. So let's say I go to a site where the background color is red. Before the end of Firefox loading it will appear as white. Also yes I have known that I have an add-on which changes the default color of YouTube. However the first picture comes on all websites no matter if their background is white or not.

  You can try the userChrome.css code or elegant.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  browser {background-color:#f0f0f0!important}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file