The airPort Extreme has green light, but nothing can connect to it.

My 5th generation AirPort Extreme suddenly stopped allowing all devices connect via WiFi or Ethernet. I can't see it in the AirPort Utility, I can not access it via the browser, and I've rebooted several times without success. I'm afraid, it may have just died, but I'll try to revive because while I can buy a new one, I hate the look of the new units. Any suggestions?

Try powering down of the entire network... all devices... in any order you want

Wait a minute

Start the modem and let it run a few minutes

Start the AirPort Extreme and run a full minute

Keep a minute out one at a time until the entire network is back of boot devices

Report on the results

Tags: Wireless

Similar Questions

  • Add a second macbook air, now the airport extreme has stopped working

    I got a new (for me) 2012 macbook air to replace my MBA 2010 last night. I had another macbook air on the network to download some files in iCloud. As soon as I started the MBA new upward across the network crashed. (Features were always connection ac Airport Extreme router, green light, but no internets).

    Restart the router helped briefly before the problem comes back. When I connect with the new MBA, I had seen an error there are two Macbook Air on the network and it was changing the name of one of them.

    I read somewheres that download great traffic and a lot of features sometimes overwhelms the airport extreme (huh? not very extreme), so I made the turn power off the wireless on iPad, apple tv and the old MBA. This, most reboot the router and the modem seemed to do the trick for a while, until that there no more.

    I read around DiscoveryD and the problems with Hello. Will try this angle when I go home.

    I see here that maybe I need to reset (rather than just reboot) my router now that there's a new kid on the block - the new MBA.

    Any other ideas?

    Where did you got your 'new' MacBook Air? Apple or an evening private? If the latter, it can be configured as such not "play well" with your existing home network. If you have received this by a private party, I strongly suggest you reload a clean version of the feature of MacOS X. In this way you will start with a Mac "out-of-the-box" and should have an easier time getting connected to your network without problem.

  • The Airport Extreme has download slow unless its an apple product

    I need help.  I have an Airport Extreme router.  I run a HP all in one office, two smart TV, Wii and two boxes on my router.  Not all work at the same time, nor do two pass at the same time.

    I check my router on Mac speed: 100 Mbit/s easy.  I check my iphone: 100 Mbps.  I checked the HP desktop computer: 30-50 Mbps.  I haven't checked the Wii, Smart TVs do not open always Netflix, my boxes go slow and buffer for long periods of time.

    There must be a setting that does not allow non-Apple products to run more slowly.  I pay 100 Mbps and expect to receive 100 Mbps on the Airport Extreme for all products, not just Apple products.

    What I could try or have I missed that should be done so all non-Apple products get the speed of download and Apple products?

    I called support and they had me change the channels in the configuration of the Airport Extreme wireless.  That did not help.  I changed them back and now the iPhone runs slower, below 50 Mbps upload when you fill out a speed test on www.speedtest.com.  I'm sitting in the same place.  It makes no sense at all.

  • I intalled Creative Suite 6 on my iMac and the serial number has been validated, but when I connect activate the software, it is suspended until I have the strength of smoke activation. No error message; I have no problem signing in the case.

    I installed Creative Suite 6 on my iMac (Yosemite) and the serial number has been validated, but when I try to connect to activate the software, it is suspended until I have force the activation of quit smoking. No error message; I have no problem signing in the case. Help?

    Hi Jdburton,

    Please check: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    Concerning

    Megha Rawat

  • Airport utility show that airport extreme has a problem, but it remains inaccessible

    My Airport extreme began to play up.  As you can see in the picture, it seems to have a problem and cannot be opened for editing.  I tried several times to do a hard reset and reinstall my setup.  It works and the network remains functional, but after a few minutes, the Base Station will appear with this warning sign.  Any ideas on how to solve this problem?

    A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:

    • Run the AirPort Utility.
    • Select the base and then station, select change.
      • Note: You may need to use the option "configure others...". "to access the base station. Enter the IP address of the base station, the default value is: 10.0.1.1 and base station administrator password when you are prompted.
    • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
    • If you have entries here, select it and click then the minus sign "-" button to remove it.
    • Click on update and allow the base station restart.
  • The AirPort Extreme has it double bands?

    I'm looking into buying an AirPort Extreme. Support double bands? If Yes, can I set up so that the two groups have the same network name, and the device can choose which one to use?

    Support double bands?

    Yes, by default.

    can I set up so that both groups have the same network name.

    It is the default set up for AirPort Extreme.  It is also possible to assign different names to the bands 5 GHz and 2.4 GHz if you wish.

    and the device can choose which one to use?

    In theory, Yes. In practice, things don't always work out so although theory suggests, you need to check and see how well facilities choose their connections in your home.

  • Why is my slower than wifi ethernet download speed when using the airport extreme?

    Hi all

    This is my first post here, so please bear with me. I currently own stunted 2011 Macbook Pro 13 inch and an extreme A1521 from the airport. My ISP has promised 50Mbps downloading and sending 10 Mbps. When I connect my MPro via ethernet/wi-fi to my modem I get as promised. When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok. However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps. Anyone know how to fix this?

    If you check the 'fine print', your ISP has promised "up to" 50 Mbit/s and 'up to' 10Mbps.  The ISP might provide more than that during periods of slow activity, like the days of the week during the day, but much less during evenings when there are many more users on the Internet.

    When I connect my MPro via ethernet/wi-fi to my modem I get as promised

    I assume that you meant to check the Ethernet connection, you disable WiFi on Mac when you do this. And unplug the Ethernet cable when you check the speed of the WiFi, correct?

    If so, this tells you that the Ethernet port to both the modem and the Mac work properly, and WiFi work correctly as well.

    When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok.

    If this tells you that the Ethernet connection between the modem and the AirPort Extreme works correctly, and wireless works fine on the AirPort Extreme.

    However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps.

    Well, you know that the Ethernet connection between the modem and AirPort Extreme works because you can register 48 Mbps Wireless.

    Thus, the possibilities are narrowed to two elements at this stage:

    (1) the Ethernet cable is defective or making intermittent contact. Try another Ethernet cable, to ensure.

    (2) If you have turned off AirPort Extreme and rebooted several times, and you know that the cable between the Mac and AirPort Extreme works properly, then you have reduced the question down to the Ethernet on the AirPort Extreme, which is probably defective switch.

    If you have not already done so, try other ports Ethernet on the AirPort Extreme.

    As a last resort, perform a reset material on AirPort Extreme and put up again. To perform the Hard Reset... power on AirPort Extreme for a few minutes, then hold it pushed in the reset button on the back of the unit (near the AC power plug) for 7-8 seconds and release. Allow a minute for the AirPort Extreme restart orange light flashing slow.

    I once went through two consecutive airport extremes with the same question about 8 months ago, so it can happen.

    If you're still having problems, then it is time to take the AirPort Extreme of Apple Store... If you have one near you... or contact the Apple Support directly by clicking on 'Contact the Support' in the upper right area of this web page.

    Good luck!

  • Failure of the Airport Extreme and Airport Express

    Airport Extreme not to talk to the device POE from the antenna of radio after a thunderstorm (lightning).  Plug the POE ethernet cable directly into Mac works.  Airport Express lights.  Airport Extreme appears, but there is no internet connection.  A port can be fried on the Airport Extreme?

    Yes, but unfortunately the port that will blow is that ethernet is plugged.

    If it's WAN then you do not have a way to use the airport as a router... only a bridge device.

  • Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

    Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

    The airport connects using DHCP in Bridge Mode

    The router address is 192.168.80.1

    Address IPv4 is 192.168.80.2

    DNS server is the same as the router, but grayed out

    Mac Mini IPv4 Address is 192.168.80.3

    IPv6 automatically configures

    Also updated the firmware of the airport; no change.

    ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

    Any ideas to fix?

    Thank you.

    Post edited by: en maschera

    but my my Mac mini does not connect to the internet.

    The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

    Hello

    Network preferences may be damaged.

    Open the Finder. In the Finder menu bar, click go > go to folder

    Type or copy paste the following text:

    / Library/Preferences/SystemConfiguration

    Click OK, and then move all files in the SystemConfiguration folder to the trash.

    Restart your Mac. See if that makes a difference.

    Your Mac will generate a new SystemConfiguration folder for you.

    Then open AirPort Utility located in HD > Applications > Utilitiies

    Make sure that both Internet and Extreme are green.

  • The Airport Extreme 2 to died (light orange) 5 years

    A few days ago my MacBook pro let me know he could ' t locate the time capsule and hand't stored in more than a week.  I checked the other computers in the House, I discovered that they were all not finding time capsule not more.  When I checked the device the light was green, and all machines were connected to the wifi signal that he died.  I unplugged the Airport Extreme and gave him a minute or two and it reconnected.  I never heard the spin drive up so I guess the hard drive should have failed a few weeks ago.  After power cycling the light remains orange solid, and wifi no longer works.  Airport utility will not find the device.

    My questions are:

    Why if the wifi work until it's the power to bike after the hard drive failed?  The fact that the wifi does not work now shows that I should just trash and get a new one?

    Should I just install a new hard drive, if so where can I get the disk image format?

    Thank you for reading this!

    Why if the wifi work until it's the power to bike after the hard drive failed?  The fact that the wifi does not work now shows that I should just trash and get a new one?

    It worked because the TC was functional, even if the hard drive was not... If you open airport utility you should have seen a hard drive error, but he might have ignored, so... in fact the main light must have been orange flashing not green.

    The TC is designed to test the hard drive when starting... If it fails the TC does not start.

    You will have an indicators of solid orange color which is hard drive failure.

    If you open the TC you can replace the drive. See https://www.ifixit.com/Device/Apple_Time_Capsule

    Should I just install a new hard drive, if so where can I get the disk image format?

    Once you install the disk simply go to the tab of disc airport utility and erase the drive... which will set it up properly.

    One thing to consider is the economy... a TC 5 years really may not be worth a repair... power supplies can also go wrong.

    If it's a Gen3 and when you open it is brand Delta power, then it might be interesting to replace the drive... a Gen4 usually also would be worthwhile. Disk 4 Gen is WD green... and he might have lost format rather that died... you could so be able to simply delete it.

    Tell me the A1xxx of the base model and I can help you understand what to do... I've fixed hundreds of them.

  • Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

    Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

    Hi carlottav39691716,

    Please see the following links:

    Error 43 - I can't download any adobe apps CC or creative cloud Manager

    Creative cloud, re-install-Dungeon error 43

    Error in downloading, installing or updating Adobe Creative Cloud applications

    Let us know if that helps.

    Kind regards

    Sandrine Bani

  • How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

    I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

    1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

    2. can someone tell me how to change the password used to connect to my wireless network?

    Thank you very much!

    Chris

    If a firmware update is available, AirPort Extreme flashes orange.

    The most up-to-date version of the firmware is 7.7.3.

    You can see what version you currently have the following on your Mac...

    Open Finder > Applications > utilities > AirPort Utility

    Click on the image of the AirPort Extreme

    Look for the Version

    If the new firmware was available, you will see a button update here

    To change the wireless network password...

    Click on edit in the window smaller than you watched just to check the firmware version

    Click on the Wireless tab at the top of the next window

    Go back / change the wireless password and enter a new password

    Do the same thing to check

    Click Update at the bottom right of the window and give the airport a minute full for restart

  • The Airport Extreme WiFi intermittent 2nd generation

    I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

    My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

    Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

    I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

    I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

    Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

    Thank you!

    The question is the 2nd generation AE is now too old.

    I would say the power supply (external or internal) is dying.

    It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

  • the Airport extreme, giving a slow wifi connection

    Hello

    I've got my download speed of 200 Mbps cable company. I checked a good signal by plugging directly in he back of the Modem (to remove the photo Airport extreme wifi.) ... I have 221Mbps actually...

    However, once I'm going to plug in the Airport Extreme and text my speed on wifi, I get only between 24 Mbps or max after several trials of 54 Mbps on download... I should get just under 200 Mbit/s because of the normal fall through wifi... However, not to the extreme I loss I get...

    Tuesday Apple Support has helped me to perform a reboot of the router and I have been good to get 198Mbps... It is here 2 days later and I'm back down to 24 Mbps...

    I tried to redo the reboot: unplug the unit, hold down the reset button, then while holding down the reset button, add power on and continue now stuck until it flashes yellow... But curiously, after it flashes it goes straight to the green... (never asking me to airport utility to add a password)

    My Wifi speed stink...

    What continues with this device... anyone have recommendations?

    I already proved the cable line and the modem (with the support of motorola)...

    Thank you

    Most likely you have a faulty AirPort Extreme. Please ask Apple to replace this unit for you.

    If you wish to renew a reset, follow the instructions very carefully:

    Turning off AirPort Extreme

    Wait 7 - 8 seconds

    Hold the first reset button... and hold in an additional 7 to 8 seconds while simultaneously you reconnect the power on the AirPort Extreme.

    Release the reset button to zero after the period of detention

    Allow a minute for the AirPort Extreme restart. The light will be Orange fixed for 15-20 seconds about, then turn to flashing orange slowly after about 30 seconds

    A slow amber flashing light... about once per second... confirms that the airport has been reset and you can set it up again.

  • The airPort Extreme (2007) and Time Machine

    Hi all

    I read the info "how to ask a good question" and apparently you need details. I'll try and be concise but informative with my problem. It has been a long journey to get to where I am, but hopefully, with a little help from this amazing community, I can get to my destination.

    Task

    To produce a backup solution Time Machine for the family spending as little money as possible and using the BRIC and broc, I already have.

    Equipment available

    I have a House with some ethernet cables for most rooms that through switches to allow a variety of, most entertainment devices to communicate. It is:

    1 x NAS/Media (ReadyNAS Duo v2) server,

    2 x TV (Samsung),

    2 x TEU (Beyonwiz),

    2 x Apple TV (a 2 nd generation the other is the latest version)

    2 x DVD players,

    1 x iMac.

    2 x 8-port switches,

    1 x 16 switch ports,

    1 x AirPort Extreme (2007).

    1 x Airport Express (age unknown but older than the extreme)

    1 x Fritz! Box 7490 Modem/Router

    Courses in place

    All the associated TV stuff are connected in 2 rooms through ethernet via switch 2 x 8 ports switch 16 central port and then to the Fritz! modem/router box.

    There are also all the usual WiFi going on with mobile phones, iPads and laptops.

    Remarkably, it seems just to work!

    However, I want to add some backup data on our computers. I tried to do by using the ReadyNAS as it is supposed to support Time Machine, but I can't it to appear as a backup destination. So, I thought, as I have AirPort Extreme, I add it to the network and attach a USB HDD for Time Machine since it is supposed to be easy. However, I've been home for hours and cannot make the HARD disk appear in system preferences/Time Machine.

    I plugged the Airport Extreme in one of the switches 8 port said to create a wireless network with the same details as the Fritz! The box according to another article of the support (Airport Extreme wired AND expand network - need of entry). Airport utility shows me Wi-wired connections and seems to work.

    I look at the AirPort Extreme disks tab and can see the attached USB drive here. However, it does not appear as a choice of drives available for backup in Time Machine preferences. I tried 2 different discs with the same result.

    The Question (finally)

    How can I get Time Machine preferences to show the USB disk attached to AirPort Extreme as a valid choice for backups? If anyone can give me a little help in the right direction, I would be very grateful.

    Thank you for reading this,

    Grant

    Unfortunately, the key here is that the version of AirPort Extreme you have does not officially support Time Machine backups on a drive to the USB port of the device.

    The only version of the AirPort Extreme, which will officially support Time Machine backups on a drive in the USB port on the airport is the 802.11ac current version that looks like a "tower". Older versions of 'flat and square' of the AirPort Extreme don't support Time machine with a USB drive attached.

    To check, please see "Time Machine in charge of USB drives" in this Apple support document... AirPort base stations: discs on USB - Support Apple

    Support for time Machine to USB drives

    OS X Time Machine supports compatible USB drives encrypted, related to the time Capsule (802.11n and 802.11ac) AirPort and AirPort Extreme (802.11ac).

    Given that the average life of most wireless routers lasts about 5 years, and your AirPort Extreme seems to be about 9, your AirPort Extreme did very well for you... much better than the average. It might be time to start thinking about a replacement who will be responsible for backups Time Machine... either a time Capsule (i.e. an AirPort Extreme with a built-in hard drive) or another AirPort Extreme.

Maybe you are looking for