How to set up a clean boot in order to update

Similar Questions

• Step by step how to set up bios to boot XP Lenovo 3000 K series?

  Hi all

  IM has been trying for several days to install xp on my PC, but it does not work. Ive also tried to install recovery DVD that Ive got with the PC but each time it seems same message that Ive had a problem with my HDD and the fourth to solve the problem in the BIOS. I tried Hurd, but no luck. I know that I've to change the AHCI RAID but I can't find this option in the BIOS.

  I have to please anyone can give a step by step how to set up bios to boot XP on Lenovo 3000 K Series.

  Thanks in advance.

  Hello

  Ive solved the problem by removing the battery for a few minutes clear the BIOS.

• How can I perform a clean boot in Windows XP?

  I have a program (ATGinaHook.dll) that I can 't find to uninstall; It aims to prevent the upcoming welcome at startup screen and it is new and I don't put it here (knowingly). I asked and got an answer that by starting the system in a State of clean boot, it might be useful.

  Do not click on answer if your question is not answered. I remember that a long time ago, I installed a driver for a wireless adapter. It looks almost like a flash drive, but it allows you to connect to a wireless connection on desktop computers that have no wireless devices. When I installed using configuration, it disabled my home screen. The computer should start up and go to a classic windows screen asking me to login with my password which was totally empty, because I have not set a password. I thought that maybe you used an identical to landmines wireless adapter in the past. If that were the case then I would have been able to solve your problem. I think it might be something you might have installed. He is not very smart to simply get the .dll file and remove it because the .dll files are generally large system. So basically deleting it could probably make the situation even worse than it is already. By chance, there is a lenovo with a fingerprint reader to your computer? All the posts I've seen on the talks from the internet to a kind of fingerprint reader. Look at these forums, I do not know if they will help you.

  How to get XP Welcome screen ?
  How to restore the XP Welcome screen?
  What is ATGinaHook.dll ...?
  How to restore the XP Welcome screen
  Windows Welcome screen replaced by finger print...

• How to set up a program capable to receive Vista updates?

  I have a laptop HP using very limited course of Vista.Of I'm getting with vista even though I personally like to use vista he no longer works for the times re changing...

  Where should I go from here? I can't afford a new laptop!

  Thank you for any input on this!

  Vista gets updates for April 2017... http://Windows.Microsoft.com/en-us/Windows/lifecycle

  Perhaps now you enough money to buy a new PC... Or to buy a 10-Windows CD and do a clean install. So you have time to run again...

  Or you have problems with Windows Update? (If I have misunderstood something)

  While waiting, you SHOULD back up your files on hard extern and USB drive, because you can't "afford" a system-chrash and lose your photos, documents and other personal stuff.

• How to set the property on a orginOfOrder order REST

  Just started to work with the REST api and building on some harniess/poc test.
  
  What I have so far is the following:
  
  Result RestResult = RestComponentHelper.getPropertyValue ("/ atg/store/order/purchase/CartFormHandler", "order", null, mSession);
  String responseData = result.readInputStream ();
  
  This property returns back
  {'order': "order [type: default;]"} ID: o54180002; Status: INCOMPLETE. Transitional: false; profileId:24549804; ]"}
  
  
  I want to do is be able to set originOfOrder on the order.

  What you were doing in your code, it's that you have called the method CartFormHandler.getOrder () customer thru REST.

  If you want to set a value any order, you must write you still own method and call from your code.

  Peace
  Shaik

• is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?

  Original title: Dual boot

  My XPpro on a former player, was upward. then, I got another new drive, installed Win7Ultimate.  Well, I got the OLD disk works with XP on it.  But, some of these apps DO WORK not on Win7.  so, at least for now, I have two drives installed on the same computer.  is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?   Operating systems already are on 2 different disks.

  Hello

  How to set up a Dual Boot Installation with Windows 7 and XP
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  Definitive dual-booting guide: Windows 7, Linux, Vista and XP step-by-step
  http://apcmag.com/the_definitive_dualbooting_guide_linux_vista_and_xp_stepbystep.htm

  Dual Boot computer preinstalled Windows 7 with XP
  http://www.howtogeek.com/HOWTO/8790/dual-boot-your-pre-installed-Windows-7-computer-with-XP/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to do a clean boot

  Trying to follow these steps to install the download 1.11 frame that I got erroe code 80073AA2 and I don't know how to do a clean boot. If anyone can help.

  Step 1:
  Download the stand-alone package of the update from the Microsoft Download center, put the computer in a State of startup boot, then try to install.
  Put the update number in the link below to find:
  http://www.Microsoft.com/downloads/en/default.aspx

  Step 2:
  Put the computer in a clean boot state, then check the issue.
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to solve a problem by performing a clean boot in Windows Vista or in Windows 7?
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Trying to follow these steps to install the download 1.11 frame that I got erroe code 80073AA2 and I don't know how to do a clean boot. If anyone can help.

  Step 1:
  Download the stand-alone package of the update from the Microsoft Download center, put the computer in a State of startup boot, then try to install.
  Put the update number in the link below to find:
  http://www.Microsoft.com/downloads/en/default.aspx

  Step 2:
  Put the computer in a clean boot state, then check the issue.
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to solve a problem by performing a clean boot in Windows Vista or in Windows 7?
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Maybe you should read what you posted...

  In step 2, the writer has already noted article for instructions on how to clean the boot in Vista.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to solve a problem by performing a clean boot in Windows Vista or in Windows 7?
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  In the case of a doubt watch the video in the article above.

• How to clean boot

  How to clean boot

  Hello

  read these tutorials

  This article describes how to start your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot". This article also provides information that you can use to o solve conflicts of service or application.

  http://support.Microsoft.com/kb/331796

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  http://support.Microsoft.com/kb/929135

• How do I restart the computer after the clean boot

  Hi, I need to know how to reset my computer to start as usual after a clean boot troubleshooting, to reset the computer as usual, thank you very much.

  Hi Eric,.

  To help you with your concern on how to reset after you perform a clean boot, please specify below:

  • You try to turn on and off your computer?
  • What version of Windows are you using?

  Kind regards.

• How to download Guided Help for the clean boot

  I would like to learn more about how to perform a boot clean and when you go to:

  http://support.Microsoft.com/default.aspx?scid=kb%3ben-us%3B310353

  Here, there is a hyperlink to:

  Download Guided Help

  When I click on it using Firefox there is a download for 310353.exe which is a binary file of opening http://download.microsoft.com

  the file is then saved and it appears in the download

  clicking on it opens an executable file.  Are you sure that you want to run 310353.exe?

  Do you want to run this file?

  Yes and then choosing this computer produces Guided Help can not be downloaded right now, please try again later...

  After many attempts, it does not download.

  When I click on it using IE it opens a file download 310353.exe application 134KB

  He then opened editor packages GSA ACW Micrsosot Corporation

  When executed, it opens

  Guided Help

  You want to run Guided Help on this computer or on another computer?

  Choose this computer and clicking next product

  Guided Help can be downloaded right now

  Please try again later or visit the help and support web site for more information.

  I went to this menu during about a week and it never download Guided Help.

  How to solve this failure to download so that I can learn about the clean boot and received interactive help?

  The information (not the ms response) that I had on http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B310353

  is there any information to download.  The link still works, but the information for the download/installation has been removed.  And a return at a later date to check will therefore end in place with guided help can be downloaded right now.  It only works if the information has been restored.

• Windows Exployer will not respond in 'Normal Mode', in 'Safe Mode' or in 'clean boot '. "Fix it" even does not work. How can I fix this problem?

  Windows Explorer does not work in 'normal', in "Safe Mode" Mode or in "clean boot".  Same 'Fix it' does not.  How can I fix this problem?  I have Win 7, 64 bit.  Thank you.

  Hello

  1. do you receive any error messages?
  2 has there been any changes made on the computer before the show?

  Method 1:
  If this solves the problem, you can run check and the (SFC) System File Checker tool. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem persists, you can create a new user account and check if the problem still persists.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3:

  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
   
  I hope this information helps!

• How do I set up a dual boot Vista and XP with 2 hard drives?

  Dual boot Vista and XP with 2 hard drives

  I tried to get my computer has a separate hard drive put in place that lets me run Windows XP or Windows Vista. I tried the path of the CMD, but I could do things wrong with that because the news NTLDR appeared much too different info from Vista. Currently, I have deleted this change to the startup configuration. I want to know what I have to do to get these two to be able to boot. I noticed problems similar to mine, but the answer always seems to be a software that would cost me money.

  Thank you

  Tevans95

  Hello Tevans95,

  You cannot install two different operating systems on two different disks. For a dual-boot environment, you must install both XP and Vista on the same drive with different partitions.

  In addition, you must install Windows XP first and then Windows Vista.

  You can check the items below which will give you information on Dual boot.

  Install multiple operating systems (multiboot)

  Set up a dual-boot system

  Change the default operating system for startup (multiboot)

  There is no software that can help you to install XP and Vista on different drives.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• After doing a "clean boot" and then begins a reset, how do I activate the starting aps in the Configuration of the system when the "Activate" button is low?

  I just ran a "clean boot" on Windows 8.  Now, I'm trying to reset my computer but when I enter msconfig - System Configuration - Services - the "Hide all Microsoft Services" checkbox is more verified and the "Disabled" button is available, the button "Activate" is low.  According to the instructions on support.microsoft.com/kb/929135 should show the opposite, and I have to uncheck 'Hide' and 'Activate' all access points.  What can I do to activate the aps and finish reset correctly.

  Hello

  Are you trying to reset the computer to start normally after a boot minimum troubleshooting?

  If Yes, then I would like to inform you that once you select Normal startup under Startup selection all services and startup items will be automatically activated. You just need to restart the computer to start the computer normally.

  Please answer us on the State of the question to help you further.

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more

  My daughter's office got fried during the last storm, even though she had a surge protector.  Obviously the power company line was bad.  The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more.  When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help.  Debbie

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the scan tool (SFC) System File Checker and check if it helps.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833

  Method 2:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  Hope the helps of information. Please post back and we do know.