How to clear the Application Server Control logs?

Similar Questions

• for the application server control console

  Hi all
  
  OS: OUL5 x 64
  EBS R12 12.0.6
  
  In the readme file of patch 7272722 session
  
  5.1.2 apply Oracle Application Server 10g Release 3 (10.1.3) Patch Set 4
  (10.1.3.4.0)
  The following procedure describes how to apply the set of patches:
  1. If you are applying to a 10 g 10 g Release 3 (10.1.3) Patch Set 4 (10.1.3.4.0)
  Module 3 (10.1.3.0.0) Oracle home and your system uses Enterprise Javabeans
  3.0 applications, then you must undeploy your applications before you apply
  the patch.
  
  
  The following procedure describes how to cancel the deployment of the applications:
  one.
  
  Connect to the Console of the Application Server under the same user name command
  than the one used for the original installation. If the application is deployed
  to a specific instance of OC4J, and then access the OC4J home page for the
  See also: "Introduction to Backup and Recovery" in the Oracle
  Administrator's Guide on the server application for more information
  on Oracle Application Server backup and restore.
  
  Question:
  
  How can I check if my application uses of EJB?
  How to connect to the application server control console to run the task above.
  My ebs url: http://prod.xxxx.com:8010
  
  Thanks in advance.
  Tom

  Tom,

  -How will I know if EBS r12 12.0.6 using the EJB or not?

  In my view, it is not applicable to the installation of R12, you can omit this step. If you have a stand-alone server Oracle AS10g and you must apply this hotfix, you must then check if the EJB is used or not.

  Kind regards
  Hussein

• How to separate the application server and web server on the level of physical servers?

  I want to separate the application server and web server: locate on different hosts. Generally, we use Weblogic ACE. In the future maybe use Apache Tomcat as web server.
  Example,
  192.168.1.10 - as - Weblogic application server / module EJB
  192.168.1.11 - as a Web server - Weblogic / WEB module (can be - Apache Tomcat)
  
  Impossible to find examples and resources about it on google.
  Thank you.

  So, if we're looking for a subject such as:

  try {
      someEJB = context.lookup("ejb/Videotheek#model.logic.Videotheek");
  } catch (NamingException e) {
      e.printStackTrace();
  }
  

  If the EJB application is clustered in an object of type ' ClusterableRemoteRef (-4005477377232786958S: 172.31.0.107: [7003,7003,-1,-1,-1,-1,-1]: [8351443287261246917S:172.31.0.107:[7002,7002,-1,-1,-1,-1,-1]:ScriptDomain:VideotheekServer1/292])/289 172.31.0.107:ScriptDomain:VideotheekServer2 - 4005477377232786958S:172.31.0.107:[7003,7003,-1,-1,-1,-1,-1]:172.31.0.107:ScriptDomain:VideotheekServer2/289,-' is returned, which is part of the wlfullclient.jar.)

  You can try using the EJB or the annotation of the resource (do not know with certainty if Tomcat is favorable). For annotations work, you must use version servlet 2.5 or later. JNDI research work in a general such as for example Tomcat servlet container.

• How to get the Application Server computer name?

  I'm redirecting to a jsp fails to logon page using oracle's 10 g.
  
  Can you please tell me how to get application server name of the computer on which I run my ACE? I don't want to hardcode the link to the jsp example page
  
  http://MyMachine:7778 / MyPage.jsp
  
  I want to get dynamically AS the machine name (I can't access the data due to the error log). Please help in this regard.
  
  Thank you

  Hello

  You can use in your forms integrated GetVar tool_env.:

  TOOL_ENV. GetVar('REPSERVERNAME',l_report_server);
  TOOL_ENV. GetVar('URLSERVER',l_urlserver);
  TOOL_ENV. GetVar('APPLICATION',l_envid);

  where the first parameter is a parameter defined in the file your application server .env.

  -Mohamed Dadi

• How to determine the Application Server Edition (no version)

  Hi all
  
  We have Oracle Application Server 10 g 10.1.2.3.0 installed but I'm not sure if the enterprise or Standard Edition is installed. Is there a way to determine which edition is installed?
  
  I posted the contents of the file $ORACLE_MID_HOME/config/ias.properties below if it helps:
  
  [ComponentConfig]
  Apache.LaunchSuccess = true
  J2EE. LaunchSuccess = true
  WebCache.LaunchSuccess = false
  JServ.LaunchSuccess = false
  Portal .LaunchSuccess = false
  Wireless.LaunchSuccess = false
  Discoverer.LaunchSuccess = true
  Personalization.LaunchSuccess = false
  Forms.LaunchSuccess = true
  Reports.LaunchSuccess = true
  UnifiedMessaging.LaunchSuccess = false
  SPOM LaunchSuccess = false
  OID. LaunchSuccess = false
  DAS. LaunchSuccess = false
  DIP. LaunchSuccess = false
  OCA. LaunchSuccess = false
  ProcessConnect.LaunchSuccess = false
  IntegrationB2B.LaunchSuccess = false
  WORKFLOW. LaunchSuccess = false
  MODOSSO. LaunchSuccess = true
  JAZN. LaunchSuccess = true
  IntegrationBAM.LaunchSuccess = false
  [InstallData]
  Version = 10.1.2.3.0
  InstallType = company
  Components = Apache, J2EE, WebCache, JServ, portal, wireless, discoverer, customization, reports, forms
  IASname = as_mid.app01.domain.com
  InstanceNamesList = as_mid.app01.domain.com
  IASpassword = 058de5526c44ff19229742d633e2d995e7359684684460ecc8
  IASSvcpassword =
  Username =
  InfrastructureUse = true
  DatabaseManagedClusterSupport = true
  OIDhost = app01
  OIDport = 3060
  OIDsslport = 3131
  SSLOnly = false
  VirtualHostName = app01.domain.com
  InfrastructureInstallOnRAC = false
  JRERuntime =
  JRELocation =
  [InfraStructureDatabase]
  InfrastructureDBCommonName = asp.domain.com
  [EMConfigData]
  IMAdminSupported = True
  IMServerLocConfigurable = True
  IMReposAdminSupported = False
  CentralAdminSupported = True
  MRAdminSupported = True
  FarmAdminSupported = False
  
  Kind regards
  Leigh.

  Hello

  As far as I can see there no edition information in the YES program.

  But since you have installed forms, in my view, it must be an Enterprise edition.

  >
  Components = Apache, J2EE, WebCache, JServ, portal, wireless, discoverer, customization, reports, forms
  >

  Forms is only available with Enterprise Edition:
  http://download.Oracle.com/docs/CD/B14099_19/core.1012/b14128/editions.htm

  What about Peter

• How to rename the report server name

  Hello
  
  I would like to know how we can rename the report server. We have dev and environment in the same network of prod and it seems that the name of the report server must be unique.
  
  I followed the following link and also changed the $OH\sysman\emd\lastupld.xml file.
  How to change the name of report server?
  
  When I try to run the report, it still doesn't seem to work. Then, in the 'Application Server Control', I am unable to see the renamed server name.
  
  Please provide any information.
  
  Thank you

  Perhaps.

  If you talk about the forms Dev tool there are several ways to do so. I could try, it's find and replace SQL inside forms to see if the report server is hardcoded.

  Get an example on my end.

• How to clear the administrative events - Event Viewer log

  Hello:

  Anyone know how to clear the administrative events log listed under custom in the event viewer views?

  All the logs listed in Windows logs do not have options to clear, but the back above.

  Thank you

  ColTom2

  Hey Colonel,

  It is because this isn't 'really' a newspaper, in itself.
  This is a Search of the newspaper (and there is MUCH more that most people know), filtered to show all events in administrative type.
  The source column shows you which newspaper it came from originally.

  To get rid of them, you will need to erase all records.

  If you want to get an idea:
  Go down to the Applications and Services logs, and expand.
  Microsoft, expand it.
  Then Windows.

  Nice list?
  You need to open and delete all. To really delete it.
  VP Tech Services

• BPEL Application Server Control 10.1.3 - oc4jadmin username being exposed in the em console login page

  Hi all

  Security problem - we run Oracle BPEL 10.1.3.  When the Enterprise Manager Application Server Control login page displays the oc4jadmin username is displayed/presentations.  I was not able to find where this configured.  How can I keep the username oc4jadmin displayed on the login page?  Is - this configurable?

  Thanks in advance.

  Any guidance would be helpful

  What I discovered, Oracle has identified this as a bug.

  Bug 7477358 - NEED TO GET DEFAULT "OC4JADMIN" username, NO ISSUE ON THE LOGIN PAGE

  If the customer does not mind moving to javasso, this could be a workaround. Oracle Doc ID 397180.1

  I managed to implement javasso for asconsole; the javasso login page has no username displayed oc4jadmin when the login page is displayed.

• How to clear the system (SALT) on PE1650 event log

  Hello

  Can someone please tell me how it is possible to clear the system (SEL) event log on a PowerEdge 1650 server and also how to display the entries.

  I have a Poweredge 1650 and the amber light has recently started to Flash indicating a fault. I checked what is obvious and all components appear to be well, but when I run the Diagnostics tool I downloaded from Dell website, it begins to test and all first check the system event log but comes back with an error message saying FAIL cannot continue his tests "in the system event log is full and must be eliminated."

  Can someone please tell me how I can clear this log so it can then test the system, as verification of the system event log is the first test and it's not beyond the first part of the test which it is defective on the log of the events being full, this way it can then run the test further and if all goes well He will show me the problem.

  Also how the system event log is visible so I can see the Scriptures as it obviously has a problem because it fills the event log.

  Any help would be greatly apreciated.

  Thanks in advance :-)

  
  

• Application server cannot log on to the database user PS

  Hello
  
  First of all, my setup is:
  
  Microsoft Windows Server 2003
  Database Oracle 10 g rel 2.
  PeopleTools 8.49
  HRMS 9.0
  
  I'm trying to start the application server, but the operation fails with the error message:
  
  PSAPPSRV.5796 (0) [08/27/09 10:29:41] (1) GenMessageBox (0, 0, M): Signon database: invalid user or password database signon ID. (id = PS)
  
  I am able to sign the database with sqlplus and PS user
  
  Here's my configuration settings as indicated on the screen of psadmin:
  
  Characteristic parameters
  ========== ==========
  The servers of pub/Sub 1): n ° 15) DBNAME: [hrdmo]
  (Server 2) Quick: No. 16) DBTYPE: [ORACLE]
  (Query servers 3): No. 17) user name: [PS]
  ((4) shock: Yes 18) UserPswd: [PS]
  ((5) Jolt relay: No. 19) Networkid: [TESTSERV]
  ((6) WSL: Yes 20) AddToPATH: [C:\oracle\product\10.2.0\database\bin]
  (PC 7 debugger): No. 21) ConnectID: [people]
  (Event notification 8): Yes 22) ConnectPswd: [peop1e]
  (9 servers) MCF: No. 23) server name: [appserver]
  (10 assembler) Perf: No. 24) Port of WSL: [7000]
  ((11) Analytics servers: Yes 25) JSL Port: [9000]
  (Bridge 12) areas: No. 26) Port of JRAD: [9100]
  
  Here's the appsrv.log:
  
  PSADMIN.2336 (0) [08/27/09 10:29:29] (0) attempt to Begin priming on domain hrdmo
  PSWATCHSRV.5480 (0) [08/27/09 10:29:38] checking process status every 120 seconds
  PSWATCHSRV.5480 (0) [08/27/09 10:29:38] Server started
  PSAPPSRV.5796 (0) [08/27/09 10:29:40] (0) release of PeopleTools 8.49 (WinX86) from
  PSAPPSRV.5796 (0) [08/27/09 10:29:40] (0) used Cache Directory: C:\oracle\product\PT8.49\appserv\hrdmo\CACHE\PSAPPS
  RV_2\
  PSAPPSRV.5796 (0) [08/27/09 10:29:41] (1) GenMessageBox (0, 0, M): database Signon: ID invalid user or password for parts
  to signon. (id = PS)
  PSAPPSRV.5796 (0) [10: 29:41] (0) 27/08/09 server could not start
  PSWATCHSRV.5480 (0) [08/27/09 10:29:42] closing
  PSADMIN.2336 (0) [08/27/09 10:29:48] (0) attempt to end on the hrdmo field boot
  
  As I have said, despite the error message, I can't connect to the database with sqlplus with PS PS user password
  
  Could someone help me please with this problem? Thank you.

  user10862790 wrote:
  It is not an OPRID = "PS" in PSOPRDEFN.

  If you create a database of HRMS9, you should have this by default. Are you sure that you build a database of DEMO HRMS9? What option did you choose the DMS database setting during the creation of the BDD?
  You can copy one another or insert a new row in this table, the PS has obtained special rights.
  I would be suspicious of your creation of db and I see how you have done and perhaps restart from scratch, after carefully reading the doc.

  Nicolas.

• How to clear the account display battery when I get out of the application

  Hello

  I use the screen push method to call another screen in my application...

  When you use this method after awhile my request become slow bacuase stack display (several frames in the queue).

  If suppose that at some point if I check using the method of counting to screen it shows 36 screens are queued,

  so I would like to know how to clear the number of queue display stack when I get out of the application

  I agree with arkadyz here.  It may be something other than just a bunch of screens on the stack.

  If after reviewing your design, you still need to pop all the screens, here's a snippet of code that will do just that:

  public void popAll() {
          UiApplication ui = UiApplication.getUiApplication();
      int screenCount = ui.getScreenCount();
      for (int i = 0; i < screenCount; i++) {
          Screen activeScreen = ui.getActiveScreen();
          ui.popScreen(activeScreen);
      }
  }
  

  But if you are out of the app, there is no need to do so either.

• How to clear the server cache?

  Hi guys,.

  
  I changed the inCallDetails_Incident.html file but I did not see this change in the ServiceManager
  I restarted all of Ionix Service Manager service and clean internet cache explore customer... but nothing

  
  Someone knows how to help me?

  Thank you very much!, sorry for my bad English

  You now agree what is considered "Advanced customizations", which is not covered in Designer online documentation, but is treated in the class Certified Developer. If you are make a lot of changes like this, I strongly suggest that you take this class if you can.

  Let me see if I can explain it easily...

  If you want to make a change to the InCallDetails.js I first would like to indicate that you should not change this file, but to create a Custom_InCallDetails.js file with your custom code. This will prevent your code to be replaced in patches. To get the reference to this file, called since the Incident call screen, you must do the following:

  1. Open details call - Incident form in the designer.
  2. Click on the button "Save as." This will allow you to save the file to a temporary location for editing.
  3. Open the file in your editor of choice and add the new line of script after script standard calls:
     
  4. Save the file.
  5. Return to the designer and click the 'Load From' button and click 'Yes' to accept the warning.
  6. Save the screen and close the designer. Updated the InCallDetails.htm file is now stored in the database, not on the application server.
  7. Empty the cache server and the client.

  If the changes work again today, there is something wrong with the code and you can add the code in the debugger in order to force your script debugger.

  If you create a new DB object then you need to add container widget to the call screen and take note of the value of the name of the container that will be used in the custom javascript code. All this is covered step by step in the class materials Certified Developer.

• How to set the value of the value of the options in the application server

  Hi all

  I run the application that stores a set of options in the application server. (via BES)

  It is not store it on the local device.

  The use of the facility of service is not well understood.

  Is it also possible to use it to preserve such a configuration?

  Or, should I use as JSR-172 web services?

  Thank you

  Third-party applications can read of service books, but they cannot create or edit.  You could do a sleeve or a HTTP connection to your application server to store and read the options.  For an example, take a look at the httpdemo or the socketdemo provided with the BlackBerry JDE.

• How to call static pages using web.show_document on the application server

  Hi all.
  
  I'm using forms / reports 11 g Rel2.
  
  I´d like to call it a few static pages of forms using web.show_document and have the pages located on the same machine where the application server is running.
  
  I know it's more a problem of Oracle HTTP Server configuration, but I want to know if I can use one of the default virtual directories already defined on the installation process.
  
  Please recommend a virtual directory to use.
  
  Best regards, Luis... :))

  Sure. You can store the files anywhere you want. Of course, it is easy to create a new virtual directory. But if you want to use an existing one, the most obvious likely would be the virtual path of/forms/html that can be found here:

  INSTANCE_HOME\config\FormsComponent\forms\html

  The url to access it would look something like this:

  http://server:port/forms/HTML/myWebPage.htm

• 10g to Oracle Enterprise Manager Application Server Control does not work

  Hello
  We have installed the application on 9.21.0.98 Server (solaris machine).
  For the server is woking, but the report server does not.
  
  Now I want to connect to Oracle Enterprise Manager 10 g Application Server Control
  to solve the problem
  
  In my PC (windows), I opened internet explorere (IE), and I entered the following URL
  http://9.21.0.98:7778 / (7778 is probably http port)
  Now I see a web page.
  
  Here I see the following on the right side of the page
  
  Oracle Application Server Logins
  
  To manage and monitor Oracle Application Server,
  
  Log on to Oracle Enterprise Manager 10g Application Server Control:
  username: ias_admin
  password: specified during installation
  
  When I click on this link http://9.21.0.98:1156 / URL has appeared on the IE and I get the following error
  Internet Explorer cannot display this webpage
  
  Now to see if any application is running on this port (1156), I logged the solaris machine where the application server is intalled and I exected netstat - a | grep 1156 command. But he didn't show me anything
  
  Could you please solve my problem?
  
  Concerning

  Is it possible to change the name of report server?

  See Paulo Esteves answer in How to change the name of the report server?