How to close multiple channels in keithley 2000 TC2001 DMM AND SCAN CARD with gpib-labview

Similar Questions

• I have a subscription to Captivate 8 and you want to upgrade to 9, how can I do this without having to pay again and simply continue with my subscription?

  I have a subscription to Captivate 8 and you want to upgrade to 9, how can I do this without having to pay again and simply continue with my subscription?

  Please visit: https://helpx.adobe.com/captivate/faq.html

  Adobe Captivate Guide of purchase-9

  I hope this helps.

  Concerning

  Megha Rawat

• Select multiple channels for a single task - control and shift keys do not work

  Hello

  Following the advice of several other positions, I try to choose several physical channels in the drop-down list so that I can then use the function "unflatten channel channel" later. It seems that if I hold this key is pressed or cntrl, I should be able to select multiple channels in the list, however, this does not work for me. I tried to go in the "navigation key" property for the control channel to task, but there not all listed associations. Someone else has encountered this and found a solution?  I previously around that by declaring several channels by a colon (for example, ai1:3), but it does not work for the unflatten function.

  Thank you

  Claire.

  If I understand correctly, I think that you need to do is use a task property DAQmx. Try to use the channels property to get an array of strings.

• How to close programs that are running in the background and what services are safe cut

  under windows xp with sp3, I hear something running in the background, but no photo with her, how I close it, also how do you know which windows services are safe to clog then start and stop can be a little faster?

  For performance tweaks that I would recommend looking at http://www.tweakxp.com/performance_tweaks.aspx they have a great compilation of good settings you can do and more are step by step, so even the most novice person can perform these tasks. Insofar as something running in the background of his always possible, you have some kind of malware running I want to run a scan for these emissions.

• How to close multiple windows of firefox (not mulitple tabs)

  I often have several internet messaging Windows Open (often each window has several tabs). I would like to be able to leave all the windows with just a single closure of firefox. Currently, I can close each window with multiple tabs with a single large. I would like to extend this to several windows (each with several tabs).
  I just right click on its icon in the Solution Explorer, and one of the options is to "close all windows", and that's all. I would like to see this option available in firefox. Thank you

  Hi pyramidpower, you can go to the firefox menu and press the exit button to close all firefox windows open at the same time...

• How to display multiple channels on several plots

  I use a USB-6009 to capture data on three separate channels. However, the way I put it up now, I see the three channels on a plot. I'd like to see each channel on a separate parcel, but I don't know how I'd do. Thanks for your help.

  Hi Aparker,

  Here's a quick picture of what you could do with the Index of Array function to separate your parcels on separate graphs.

  

• How to read multiple channels based on the external clock

  Hello

  Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  I use 6254 multifunction for playback of tension with VC ++ 6 as the development tool.

  Based on the documentation NOR I created tasks like this.

  DAQmxCreateTask (_T ("Voltagetask"), & taskHandle);

  DAQmxCreateAIVoltageChan(taskHandle,sChannels,,DAQmx_Val_NRSE,0,10,DAQmx_Val_Volts,);

  DAQmxCfgDigEdgeStartTrig (taskHandle, "PFI2", DAQmx_Val_Rising);

  DAQmxCfgSampClkTiming(taskHandle,"PFI2",303000,DAQmx_Val_Falling,DAQmx_Val_FiniteSamps,nSamples);

  DAQmxStartTask (taskHandle);

  After the generation of clock finished thanks to the DAQmxReadAnalogF64 function, I tried to read samples of each channel.

  DAQmxReadAnalogF64 (taskHandle, DAQmx_Val_Auto, 10, DAQmx_Val_GroupByScanNumber, read, m_nStates & sampsPerChanRead, NULL);

  Total number of samples (nSamples) available in the buffer when the task is created with a single channel and several channels are still to come as even. In several modes of channel returns total sample by channel, which is equal to the total number of samples divided by the number of channels at once.

  For example, if a total number of clock 8000

  With single channel, it reads all the 8000 samples (m_nStates = 8000, sampsPerChanRead = 8000)

  When two tracks he read 4000 samples per channel and so on. (m_nStates = 8000, sampsPerChanRead = 4000)

  If any body know, on every clock how to take samples of all of the configured channels.

  Thanks in advance,

  Renjith.

  Renjith,

  Please note that the behavior, I explained is in line with the provisions should only if you use your clock as I convert clock. You can find information about the different types of synchronization of the analog inputs using NOR-DAQmx; the element to search for is "clocks".

  Since you do not set the clock to convert MY (should be DAQmxSetAIConvSrc()), the fact that I mentioned above is only informative for you, but does not apply to your question.  Sorry for responding too quickly without looking in your code between quotes...

  In order to answer your question, we take a look at the approach to programming DAQmx:

  If you configure your task to be "finished", the task will stop running if the number of samples per channel is acquired. In the case of an external clock (not configured as I convert clock), served it in the sampling interval. The sample clock will automatically receive a sample for all channels with a single clock pulse. From this point of view, the installation program you have in your program seems correct.

  If you do not get the number of samples that await, the fault must be somewhere in your playback function. Do you get any error messages?

  DAQmxReadAnalogF64 (taskHandle, DAQmx_Val_Auto, 10, DAQmx_Val_GroupByScanNumber, read, m_nStates & sampsPerChanRead, NULL)

  If you set m_nStates set to 8000, it's here. You say the Read function to retrieve 8000 samples. None. So if you have two channels, DAQmx acquires 2 x 8000 samples, but read you only 8000 samples... Please change m_nStates to

  m_nStates = #channels x #samples by channel

  This should solve your problem.

  hope this helps,

  Norbert

• How can I get a CMYK or Gray scale halftone and replace it with a spot color with the same value of midtones?

  Is it possible that I can select an object or objects that have a value of mixed CMYK or Grayscale, and then select a Spot color and it will keep the same value of midtones as before?

  For example, I have an object that is C: 0 M: 0 Y: 0 k: 20 and I select Reflex Blue. What is happening is it change my object to 100% Reflex Blue. Is there a way to change to automaitically Reflex Blue 20%?

  Another example, I have 3 objects, one is 20 k: the second is 40 k: and the third is KC: 85. I want to select all the objects in three at the same time, select Yellow PANTONE and get them to change yellow PANTONE 20, 40 yellow PANTONE and PANTONE yellow 85.

  Is there a way to do it or I will always have to manually edit each element?

  Thanks for the help.

  Select the elements to recolor

  Edit > edit colors > redefine > follow my screenshots

  

  I love clicking this button under the entitlement, one place for everything that you color reduction settings.

  

  Use tinted scale. Exact will give you 100% of the color. The exact word is confusing here, this means that the color of the destination (100% of everything that the color you choose), not a version tinged scale.

  

  Unfortunately I do not know how to get the exact values of blacks to convert the exact values of spot color. Scale of hues will you get you get you close enough for what you need. In my example that a black 89% converts a 84% of the place, so no exact but alteast I have a range of shades, and sometimes the results are better than accurate, depends on your art.

  Here are my before and after.

  

• How to get the rate max one sampling NOR 9263 and other cards?

  Hello!

  I'm using a NI 9263 map and a chassis cDAQ-9172 proyect and im he 8.0 whit CVI programming. IM generating a sine and square waves to do some tests on a radio.

  I want my program to be functional for all cards of this type, and we know that most of the cards have different specifications, for example sampling max tariff, in this case the Pentecost of work NI 9263 100 kech. / s as the maximum. IM generating waves based on the sampling frequency.

  If my program must be compatible with most of the cards, my need to program to acquire max sampling rate using a specific function of NIDAQmx.h.

  Do you know if theres a function or attribute that can return this value?

  I tried this function with different attributes, with no results:

  DAQmxGetTimingAttribute (taskHandle, DAQmx_SampQuant_SampPerChan, & MaxSamp);
  DAQmxGetTimingAttribute (taskHandle, DAQmx_SampClk_Rate, & MaxSamp);
  DAQmxGetTimingAttribute (taskHandle, DAQmx_SampQuant_SampPerChan, & MaxSamp);
  DAQmxGetTimingAttribute (taskHandle, DAQmx_SampClk_TimebaseDiv, & MaxSamp);
  DAQmxGetTimingAttribute (taskHandle, DAQmx_SampClk_Timebase_Rate, & MaxSamp);

  The three first atribbutes gives me the rate real samp which is 1Ks/s (according to me, is the rate of samp set to the default value for all cards you before be initialized for the user), but do not give me samp (100Ks/s) max flow.

  The rest of the attributes only gives me the value of the clk, which is 20 MHz and the divisor of the clk (20000). Also I tried with a card 9264 (max samp rate is 25 ksps / s) and the function returns the same results.

  Any idea?

  Thank you!!

  Hey Areg22,

  I think I've found the service you're looking for:

  http://zone.NI.com/reference/en-XX/help/370471W-01/mxcprop/func22c8/

  This link gives just the syntax for the function, but the following gives you more information about the function:

  http://zone.NI.com/reference/en-XX/help/370471W-01/mxcprop/attr22c8/

  When I used the property of this function node output was 100,000 for the NI 9263. Which is consistent with the plug. I would like to know if it works for you.

  Thank you

  -KP

• Keithley 2000 not identified NOR Measurement and Automation Explorer using GPIB

  Hello

  I recently used NI TestStand and NI MAX with IVI drivers to get my working(using USB) peripheral. He has worked successfully for TG5011 and TDS1002B Oscilloscope function generator.

  Following the same procedure: I started with 2000 model DMM of Keithley with GPIB.

  I am facing difficulties in finding my camera on OR-MAX devices and interfaces. I use a GPIB KUSB - 488B USB adapter to connect.

  I can interact with the device of VISA Interactive Control and KUSB diagnosis tool and you can see the device in the device Windows and KI-Configuration Utility Manager. Surprisingly, I don't see GPIB Board in the NOT-MAX.

  Help, please.

  System details: NI-VISA 5.2 installed on Windows 7, KUSB-488 driver installed in command compatibility mode OR. (only ieee_32m.dll is present), installed UN NOR-488.

  Thank you

  Martin

  To help all those who have read this thread:

  I had the Keithley 2000 NOR-MAX and NOR-Test Stand using IVI Driver (for Keithley 2000 of NOR) using the KUSB - 488 B (GPIB to USB adapt from Keithley).

  Layer of keithley installed IO Keithley and I can see the unit property. I then followed the procedure for IVI MAX and TestStand pilot program and IT WORKED!

  Please find attached the screenshots for Visual clarity.

  Thank you and best regards,

• BlackBerry smartphone how to REMOVE applications (no archives) from my phone and the card?

  First of all: I sought advice and found old post of 3 months or more. I hope that new info since then.

  I have a Curve 8520 with 4.6.1 OS and Cincinnati Bell Wireless carrier.

  I've had my phone for 5 months and I'm NOT NEW to a BB. Here's my situation:

  I have download and app from AppWorld, Mahjong ACE. I played for a while and realized that it was only a demo. So, I'm going to the 'My World' section, highlight, press menu and 'DELETE '. But it does NOT, delete archives on my memory card.

  I reinstall. Play a game to ensure that it correctly reinstalled. But this time I go to the list of Applications under Options and delete from here. He always Archive on my memory card too much space, I need.

  Question: How do I CONTINUOUS DELETE an app on my phone AND memory card for good?

  I have about 6 applications that will not remove continuous that they are:

  Mahjong ACE

  DriveSafe.ly

  BB Messenger (an older version)

  However Thumbs connect four v1.0.1

  Flickr

  Theme Poker King w / tone

  Help me!!!

  Hmmm... Well, according to all the literature, it is supposed to work in this process of 2 floors. So lets try a few other things:

  Clear the application cache:

  1. open the App World

  2. go to my world

  3. for the BB keyboard-oriented - hold down the ALT key and press on, in the sequence R, then S, then T

  3. for Storm/Pearl - hold the num-lock (! 123 button) so that it hangs and then press on, in the sequence 3, then 4, then)

  4A. If your BB locks after issuing clear cache, do a battery pull reboot

  Completely re - start with AppWorld:

  (1) AppWorld remove your BB (Homescreen > Options > Advanced Options > Applications)-if she prays that you restart the BB to do.

  (2) a Batt Pull restart as described above.

  (3) get a new link and install a new copy of AppWorld

  • http://NA.BlackBerry.com/eng/services/appworld/download.jsp#tab_tab_download
  • Yet once, if he asks to restart, do.

  (4) restart another Batt-sweater

  (5) see if it works now.

  Let us know!

• How do you change the color of the text sign and fill in the color blue

  How do you change the color of the text sign and fill it with the color blue in a pdf document

  The color of the text of fill & sign is black and at the moment is not able to be changed.

  Thank you

  Josh

• How can I reset so that it will ask me if I really want to close multiple tabs?

  He used to ask when I tried to close multiple tabs and let me know how many tablets I had opened, but now it's just closed its doors. How can I get the dos prompt?

  If you set to automatically restore the previous and then you would get a confirmation dialog box.
  Only with one of the other two choices you get the dialog box.

• I left several tabs that Firefox sent the warning prompt. As I click on save and leave I pressed accidentally the "save these settings. Now I'm just wondering, how do I disable it, so that Fireox sends the prompt whenever I try to close multiple tabs?

  This may sound silly, but once when I was about to leave Firefox, I got the warning prompt if I wanted to close many tabs... As I click on save and leave I pressed accidentally the "save these settings. Now I'm just wondering, how do I disable it, so that Fireox sends the prompt whenever I try to close multiple tabs? I'm under 3.6.6 with OS X Snow Leopard.

  You can reset the preferences to warn on the topic: config page via the context menu.
  browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
  browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
  browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

  In Firefox 3, you don't get the dialog "Save and exit" pop - up if you choose Firefox > Preferences > General > startup: "When Firefox starts": "show my windows and tabs from last time '.
  Get the dialog "Save and exit" pop - up, to select one of the other options (display my home page, display a blank page).

• How do switch you between multiple channels to indicate which channel to acquire the data from?

  I'm trying to builld a VI where I can have an option to enable or DISABLE multiple channels depending on the modules plugged into the chassis and then acquires the data of the channels which are turned on and where other acquisition parameters do not change. Is there any specific/switch where can I do this? Please answer as soon as possible. Its quite urgent. Thank you

  You use DAQmx?  To change the assignment of the data acquisition channels, you must close the currently open session and then create a new session with the new channel definition.  So the order of execution:

  Create task or virtual channel - read - clear task of triggering and synchronization of the configuration - set new channel list and to create a task - read - clear task, etc...