How to completely remove Symantec of Satellite Pro P100 software

Similar Questions

• How to wear the Vista/Toshiba Satellite Pro A200 software after upgrade HARD drive

  Hello.

  Have ordered a Seagate Momentus 7200.02 200 GB SATA-300 7200 RPM 16 MB 2.5 "for my Satellite Pro A200GE - 26. Toshiba slow disk with this laptop ships is simply not fast enough so it is replaced.

  My question is this: can I use the recovery disc of the DVD came with my laptop to reinstall Vista and all the Toshiba drivers on this new album?

  If this is not the case-how can I do?

  If I can do it - could you give me a checklist of things to do?
  Are several factors I need to get used to exist on the recovery disk?

  I ask this because I know how to do this on a PC with the Original OS disc, but I was horrified when my laptop has been delivered and no original OS disk - I think it's very bad for any help would be accepted with gratitude.

  Thank you in advance,

  Kenny.

  Hello

  You should not worry about the whole procedure, just install the HARD drive, put the recovery CD in your CD/DVD drive, press F12 and start with your CD drive or just press 'C' (which automatically inserted CD, boots).

  The recovery is not limited to a specific HARD disk, it automatically adjusts the size of the partition and install EVERTHING on your disk as a preinstalled OS shipped directly from the factory. Don t you need some additional drivers or software, the only thing you need to do is to copy your personal data on the system drive and customize your windows.

  It is the intention of recovery media: put it in and it does everything by itself.

  That's all. :)

  See you soon

• Satellite Pro P100-438: how to disable the CapsLock NumLock or Scroll sounds

  Hi out there,.

  How can I disable these "ugly" notification sounds when I press CapsLock NumLock or Scroll?

  It's a Satellite Pro P100-438. Does anyone have any suggestions?

  Thank you

  It's pretty easy mate.

  Follow these steps:

  -Keep right SHIFT> key for about 10 seconds.
  A messagebox will appear (FilterKeys settings) and offer a menu:
  -Click the [settings] button and a new window will appear.
  - Remove the tag [x] of [Use ToggleKeys].
  -Click [OK] to save your changes
  You're done :)

• How can I remove fmom Speedy PC Pro my computer Windows 7?

  How can I remove fmom Speedy PC Pro my computer Windows 7?

  Speedy PC Pro is a potentially unwanted program.

  To uninstall the Speedy PC Pro computer

  1: click on the Start Menu and click on Control Panel, then:

  2: on Windows Vista or Windows 7, go to the "Uninstall programs" under "programs and features":

  Under XP, it's Add/Remvoe programs.

  3: select the Speedy PC Pro you want to uninstall from the list and click 'uninstall ':

  4: follow the steps in the application of the uninstall program:

  After that if you still see the Speedy PC Pro

  Press the Windows key and R key on the keyboard
  Now, you will get a run window. Inside of the run window, type REGEDIT and press Ok.
  Now you can see a registry. (Be complete care while using the register)

  Don't forget not registry backup before changing. , Follow the steps how to back up and restore the registry in Windows

  Arrived at
  HKEY_LOCAL_MACHINE\SOFTWARE\Speedy PC Pro and delete Speedy PC Pro
  HKEY_CURRENT_USER\Software\Speedy PC Pro and delete Speedy PC Pro

  And restart the computer. Now, it will be gone.

  Enjoyyyyyyyyyyy

• How can I "downgrade" the BIOS on Satellite Pro P100 - 160 (PSPAE)

  I have just flashed the BIOS on my Satellite Pro P100 4.8.

  The CPU runs at 100%. (90% + for windows explore)

  Only a single core is recognized by my Vista gadget.

  85 CPU temperature

  How can I "downgrade" the BIOS? Where are the older versions?

  When the new BIOS version is available to download older versions are not available more.
  What Satellite Pro P100 you exactly (model name, model number)?

• Satellite Pro P100: I need to remove some software before installing Vista

  My Satellite Pro P100 needs the following software uninstalled before installing Vista: -.
  Norton Internet Security
  Bluetooth Stack for Windows by Toshiba
  ConfigFree

  Toshiba has plans to release a version of Vista the last two?

  Hello

  I put t know that Toshiba exactly, but all the tools and utilities will be available for download after the official launch of Vista.

  A friend of mine told me that it may happen that all software will not be created separately for the facility, but as a set of software. I put t know where he found this info, but let's see how it will work.

  By the way: pile of BT for Vista is available on the Toshiba BT page. Check it out under the http://aps.toshiba-tro.de/bluetooth/

  Good bye

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• How to completely remove Beats Audio from my system?

  My computer is a number of product p7-1534, H2N63AA #ABA, running 64-bit Windows 8.1.  The audio driver was an IDT, downloaded directly at HP, specifically planned for my system.  I'm trying to figure out how to completely remove the Beats Audio from my system.  It appears in the Beats Audio, but don't control panel displays in the section programs, so I can't figure out how to uninstall IT... or it can be uninstalled without uninstalling the entire driver?  I tried to disable the Beats Audio screen and it cleared more of the effect it has on the audio, but not all - the bass is still substantially stronger than it should be.  All I want is for the music to sound just as it was initially recorded in the studio, not artificially enhanced by Beats Audio.

  I think that I'm finally rid of him.  I searched drive C for 'beats' and 'beat' and erased all those who appear to be associated with the Beats Audio.  I had to do that three times, each time by removing all tht files Beats appeared in a search.  Finally, after the third startup, nothing showed up in the search.  My audio works just fine and no more Beats Audio.  I guess I could still run beats through the motherboard, but, as long as I don't try to run beats, it loads is no longer automatically at startup.

  Thanks for your time.

• How to completely remove the trojan: win32/bamital for my computer, he says: it is partially removed

  How to completely remove the trojan: win32/bamital for my computer, he says: it is partially removed

  Hello
  1. where did you get the message saying that it is partially removed?
  2. what operating system is installed on your computer?
  3. what version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can run Microsoft Safety Scanner from the link below.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-GB/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  You can also ask your question here:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning

• Satellite Pro P100: How to recover BONES after replacing HARD drive

  Hello

  I bought a satellite Pro P100, and I want to change my hard drive
  I have the CD restored, but I think that this will not work with a new hard drive!
  What can I do to recover my windows?

  Sorry for my englich!

  Thank you

  Hey Phillipe,

  Your recovery CD works on what hard drive install you in your laptop. Are the only factors affecting the hard disk of your choice: -.

  1. compatibility of the BIOS (should not be a problem with the P100 model)
  This model mainly old laptop impact where the BIOS could not recognize larger drives.

  2 form factor
  You should make sure that the disc you choose has the same physical dimensions as your
  existing drive.

  3 speed
  Disks hard more quickly improve access times so check out 5400 and 7200 RPM. (there may be a problem
  with the generation of heat so 5400 RPM is probably better than 7200)

  The are no problem with Windows licenses as the license applies to the operating system itself and not on the hard disk on which it is installed.

  Kind regards

• Satellite Pro P100 - how to enable Intel virtualization technology

  Hi all

  I have a Satellite Pro P100 P/N PSPA4E-00X00HEN, which I just installed Windows 7 RC.

  I desperately need to run Virtual PC 2007 (other versions do not work) on this subject, but he wants that Hardware-Assisted Virtualization allows in the BIOS (Phoenix Technologies V4.70).

  I've just updated to the latest version of the BIOS, but it didn't ease for SIAS in it.
  I checked the specifications of the processor and there is no installation of Intel virtualization technology.

  From what I've read on the internet, even if the processor is capable manufacturers on the computers/laptops, in the Toshiba case, program the BIOS to their liking which will turn on or off certain functions.

  What I want to know is, it will be another update to enable virtualization or there at - it another way to do it.

  Thanks in advance.

  Hello

  To my knowledge, the use of Virtual PC 2007 does not require a virtual technology supported by the hardware (CPU).
  I have used Virtual PC and Virtual Machine on PC without the ability to VT.

  But you're right. Intel CORE2 DUO T7400(2.16GHZ) processor supports VT
  http://Ark.Intel.com/CPU.aspx?GroupID=27256

  Unfortunately my knowledge the P100 BIOS does not support the option to enable/disable VT.

• How do I reset the fan on Satellite Pro P100 control?

  Hello

  My PSPAEE - 00E006EN Satellite Pro P100 turned on his car in his carrying case the other day.
  He got very, very hot. Now on the side fan runs all the time but otherwise his work as usual.

  An easy way to restore control of the fan? TKS.

  Hello

  There is no function that could restore the cooling modules.
  I guess that your laptop was put in standby or in hibernation mode and somehow, she woke from sleep or hibernation mode

  You stop simply laptop (windows start-> closed) and then should power the unit.

  Just FYI; You can change some settings of cooling modules in the Vista power management.
  To do this, see this FAQ:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

• How to enable virtualization on Satellite Pro P100-PSPAE

  HY uall,
  I have a Satellite Pro P100-PSPAE with a CPU T5600, it is a core 2 duo CPU with Intel virtualization technology (B.t.w was one the reasons I chose this laptop in particular).

  Now my XEN-Manager tells me that this technology is not enabled in the BIOS but I can't find any switch to enable it in the BIOS. What I am doing wrong?

  Greetings Michael

  Hello

  Virtualization can be enabled in the BIOS.
  But several versions of BIOS don't support such function.

  If your BIOS does not have option, then you will not be able to activate!
  Sorry to say it buddy, but there is not much to do! :(

• Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

  Hello

  My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

  Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

  If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

  Thanks for any help or ideas
  Steve

  After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
  But I can't give you a reason why it causes an error.

  I found this similar thread in the forum
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

• Behavior strange screen/video Satellite Pro P100-109

  I have a strange problem with my Satellite Pro (P100-109 model pspa3e 00n009du). I edge video card printing is letting me down, so if anyone has a solution so please help!

  Yesterday, while working properly since I bought the machine, I had a strange video behavior. Black icon arround windows not updated correctly etc.
  After a restart of the system, these problems seemed resolved, but it lasted just a view minutes.
  After awhile, I got a blue screen (BCCode: ea BCP1...) BCP4:00000001 SP: 2.0) learned Internet research that his had to do with the video driver.

  Symptoms of the display:
  -Vertical dotted lines shown on the screen of the bios toshiba (variety of colors)
  -Loading of Windows show a few vertical lines as well
  -After loading the clickable elements appear black (not titles of window - no buttons shown/rendering)
  -L' screen goes black every 4 seconds
  -System responds very slowly, but sometimes it seems that it works normally
  -mouse disappears
  -After awhile that I get a black screen, system does not answer more.
  -In windows safe mode (so do not using the nvidia drivers), the display seems to work normally

  DID the next trying to solve my problem in vain:

  -J' I uninstalled/removed the nvidia drivers and installed the last on the toshiba site.
  -Deletion of original and installed drivers drivers Guru3D site (also used the Driverutility from the same site).
  -J' I uninstalled/removed the nvidia drivers and installed the original
  -Upgrade to SP3

  Uninstalling the driver (in safe mode) and so to use a generic driver only seem to work.

  Anyone know how this can be resolved or are these signs that the nVidia GeForce Go 7900 has been roasted.

  Hello

  Long story. short answer...

  It is really possible that your GPU chip malfunctions.

  I came to this conclusion because the laptop don t symptoms occur if the graphics driver is not installed.
  If the graphics card driver is installed the graphics card would go with the best performance and possibly graph questions would appear once again.

  I think that you can't do anything to what might solve this problem outside to contact the ASP in your country and ask for help.

  Good luck